|
DS DS 1136 |
Paving works |
|
DS DS 2077.1 |
Plastics pipes - Drain pipes and fittings - Requirements |
|
DS DS 2077.2 |
Plastics pipes - Drain pipes and fittings - Testing and inspections |
|
DS DS 2077- 3 |
Plastic pipes. Tunnel shaped drain pipes and fittings - Requirements |
|
DS DS 2119 |
Pressure pipes of polyethylene (PEL, PEM and PEH) for water supply |
|
DS DS 2119/RET.1 |
Pressure pipes of polyethylene (PEL, PEM and PEH) for water supply |
|
DS DS 2119/TIL.1 |
Pressure pipes of polyethylene (PEL, PEM and PEH) for water supply-(AMENDS DS 2119) |
|
DS DS 2349 |
Plastic pipes - Pipes and fittings of PEM and PEH for sewage pipe lines in building and in ground - Dimensions and properties |
|
DS DS 2350 |
Plastics pipes - Pipes, fittings and joints for underground gravity pipelines for transport of rain and drainage water |
|
DS DS 2379 |
Inspection chambers of PVCU, PE og PP for buried pipe lines for transport of sewage and rainwater - Specification and test methods |
|
DS DS 2420 |
Concrete pipes, fittings, manholes and inspection chambers - Supplement to DS/EN 1916 and DS/EN 1917 |
|
DS DS 400-3- 0 |
Concrete products - Sewer and drain pipes - Land drain pipes and Manholes and gullies - Test methods |
|
DS DS 400-3- 1 |
Concrete products - Sewer and drain pipes - Requirements |
|
DS DS 400-3- 2 |
Concrete products - Land drain pipes - Requirements |
|
DS DS 400-3- 3 |
Concrete products - Manholes and gullies - Requirements |
|
DS DS 400-3- 3/RET.1 |
Concrete products - Manholes and gullies - Requirements |
|
DS DS 400-4- 0 |
Concrete products - Flags, paving blocks and kerbs - Test methods |
|
DS DS 400-4- 0/RET.1 |
Concrete products - Flags, paving blocks and kerbs - Test methods |
|
DS DS 400-4- 1 |
Concrete products - Flags - Requirements |
|
DS DS 400-4- 1/RET.1 |
Concrete products - Flags - Requirements |
|
DS DS 400-4- 2 |
Concrete products - Paving blocks - Requirements |
|
DS DS 400-4- 2/RET.1 |
Concrete products - Paving blocks - Requirements |
|
DS DS 400-4- 3 |
Concrete products - Kerbs - Requirements |
|
DS DS 404 |
Dansk Standard´s Nomenclature for Sand -, Gravel - and Stone Materials |
|
DS DS 415 E |
Code of Practice for foundation engineering |
|
DS DS 421 |
Dansk Ingenioerforening´s Code of Practice for flexible, water-tight joints for pipe-lines of concrete, etc. |
|
DS DS 430 |
Dansk Ingenioerforening´s Code of Practice for the laying of underground flexible pipelines of plastics |
|
DS DS 436 |
Code of Practice for the groundwater drainage of structures |
|
DS DS 437 |
Dansk Ingenioerforening´s Code of Practice for the laying underground rigid pipelines of concrete, etc. |
|
DS DS 441 |
Dansk Ingenioerforening´s Code of Practice for small non-common water supply systems |
|
DS DS 442 |
Dansk Ingenioerforening´s Code of Practice for common water- works |
|
DS DS 455 |
Dansk Ingenioerforening´s Code of Practice for impenetrability of underground sewer systems |
|
DS DS 462 |
Code of Practice for utility registration |
|
DS DS 475 |
Code of Practice for trenching for underground pipes and cables |
|
DS DS 475/TIL.1 |
Annex A to Code of Practice for trenching for underground pipes and cables-, (AMENDS DS 475) |
|
DS DS/CEN ISO/TS 17892-1 |
Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content |
|
DS DS/CEN ISO/TS 17892-10 |
Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests |
|
DS DS/CEN ISO/TS 17892-11 |
Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Determination of permeability by constant and falling head |
|
DS DS/CEN ISO/TS 17892-12 |
Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of Atterberg limits |
|
DS DS/CEN ISO/TS 17892-2 |
Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of density of fine-grained soil |
|
DS DS/CEN ISO/TS 17892-3 |
Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density - Pycnometer method |
|
DS DS/CEN ISO/TS 17892-4 |
Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution |
|
DS DS/CEN ISO/TS 17892-5 |
Geotechnical investigation and testing - Laboratory testing of soil - Part 5: Incremental loading oedometer test |
|
DS DS/CEN ISO/TS 17892-6 |
Geotechnical investigation and testing - Laboratory testing of soil - Part 6: Fall cone test |
|
DS DS/CEN ISO/TS 17892-7 |
Geotechnical investigation and testing - Laboratory testing of soil - Part 7: Unconfined compression test on fine-grained soil |
|
DS DS/CEN ISO/TS 17892-8 |
Geotechnical investigation and testing - Laboratory testing of soil - Part 8: Unconsolidated undrained triaxial test |
|
DS DS/CEN ISO/TS 17892-9 |
Geotechnical investigation and testing - Laboratory testing of soil - Part 9: Consolidated triaxial compression tests on water saturated soil |
|
DS DS/CEN ISO/TS 22476-10 |
Geotechnical investigation and testing Field testing Part 10: Weight sounding test |
|
DS DS/CEN/CR 14380 |
Lighting applications - Tunnel lighting |
|
DS DS/CEN/TR 13201- 1 |
Road lighting - Part 1: Selection of lighting classes |
|
DS DS/CEN/TR 14819- 1 |
Safety recommendations for cableway installations designed to carry persons - Prevention and fight against fire - Part 1: Funicular railways in tunnels |
|
DS DS/CEN/TR 14920 |
Jetting resistance of drain and sewer pipes Moving jet test method |
|
DS DS/CEN/TR 15128 |
Survey of European Standards for rehabilitation of drain and sewer systems |
|
DS DS/CEN/TS 13244- 7 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity |
|
DS DS/CEN/TS 1456- 2 |
Plastics piping systems for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity |
|
DS DS/CEN/TS 14578 |
Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GPR) based on unsaturated polyester resin (UP) - Recommended practice for installation |
|
DS DS/CEN/TS 1793- 4 |
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction |
|
DS DS/CEN/TS 1793- 5 |
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection and airborne sound insulation |
|
DS DS/CEN/TS 1852- 3 |
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 3: Guidance for installation |
|
DS DS/EN 10224 |
Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions |
|
DS DS/EN 10312 |
Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions-Amendment 1:6/17/2005 |
|
DS DS/EN 1074- 1 |
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements |
|
DS DS/EN 1074- 2 |
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves |
|
DS DS/EN 1074- 2/A1 |
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves-(AMENDS DS/EN 1074-2) |
|
DS DS/EN 1074- 3 |
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3: Check valves |
|
DS DS/EN 1074- 4 |
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves |
|
DS DS/EN 1074- 5 |
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves |
|
DS DS/EN 1074- 6 |
Valves for water supply - Fitness for purpose requirements and appopriate verification tests - Part 6: Hydrants |
|
DS DS/EN 1091 |
Vacuum sewerage systems outside buildings |
|
DS DS/EN 1115- 1 |
Plastics piping systems for underground drainage and sewerage under pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 1: General |
|
DS DS/EN 1115- 3 |
Plastics piping systems for underground drainage and sewerage under pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 3: Fittings |
|
DS DS/EN 1115- 5 |
Plastics piping systems for underground drainage and sewerage under pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 5: Fitness for purpose of the joints |
|
DS DS/EN 1123- 1 |
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control |
|
DS DS/EN 1123- 1/A1 |
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control-(AMENDS DS/EN 1123-1) |
|
DS DS/EN 1123- 2 |
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 2: Dimensions |
|
DS DS/EN 1123- 3 |
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship- building |
|
DS DS/EN 1124- 1 |
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control |
|
DS DS/EN 1124- 1/A1 |
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control- (AMENDS DS/EN 1124-1) |
|
DS DS/EN 1124- 2 |
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S; Dimensions |
|
DS DS/EN 1124- 3 |
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X; Dimensions |
|
DS DS/EN 1124- 4 |
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems Part 4: Components for vacuum drainage systems and for drainage systems on ships |
|
DS DS/EN 12063 |
Execution of special geotechnical work - Sheet-pile walls |
|
DS DS/EN 12110 |
Tunnelling machines - Air locks - Safety requirements |
|
DS DS/EN 12111 |
Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements |
|
DS DS/EN 12201- 4 |
Plastics piping systems for water supply - Polyethylene (PE) - Part 4: Valves |
|
DS DS/EN 12271- 3 |
Surface dressing - Specifications - Part 3: Rate of spread and accuracy of spread of binders and chippings |
|
DS DS/EN 12272- 1 |
Surface dressing - Test methods - Part 1: Rate of spread and accuracy of spread of binder and chippings |
|
DS DS/EN 12272- 2 |
Surface dressing - Test methods - Part 2: Visual assessment of defects |
|
DS DS/EN 12272- 3 |
Surface dressing - Test method - Part 3: Determination of binder aggregate adhesivity by the Vialit plate shock test method |
|
DS DS/EN 12274- 1 |
Slurry surfacing - Test methods - Part 1: Sampling for binder extraction |
|
DS DS/EN 12274- 2 |
Slurry surfacing - Test methods - Part 2: Determination of residual binder content |
|
DS DS/EN 12274- 3 |
Slurry surfacing - Test methods - Part 3: Consistency |
|
DS DS/EN 12274- 4 |
Slurry surfacing - Test methods - Part 4: Determination of cohesion of the mix |
|
DS DS/EN 12274- 5 |
Slurry surfacing - Test method - Part 5: Determination of wearing |
|
DS DS/EN 12274- 6 |
Slurry surfacing - Test methods - Part 6: Rate of application |
|
DS DS/EN 12352 |
Traffic control equipment - Warning and safety light devices |
|
DS DS/EN 12368 |
Traffic control equipment - Signal heads |
|
DS DS/EN 124 |
Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control |
|
DS DS/EN 12414 |
Vehicle parking control equipment - Pay and display ticket machine - Technical and functional requirements |
|
DS DS/EN 12591 |
Petroleum products - Bitumen and bituminous binders - Specifications for paving grade bitumens |
|
DS DS/EN 12591/RET.1 |
Petroleum products - Bitumen and bituminous binders - Specifications for paving grade bitumens |
|
DS DS/EN 12613 |
Plastics warning devices for underground cables and pipelines with visual characteristics |
|
DS DS/EN 12675 |
Traffic signal controllers - Functional safety requirements |
|
DS DS/EN 12676- 1 |
Anti-glare systems for roads - Part 1: Performance and characteristics |
|
DS DS/EN 12676- 1 |
Anti-glare screens for roads - Part 1: Performance and characteristics- (AMENDS DS/EN 12676-1) |
|
DS DS/EN 12676- 2 |
Anti-glare systems for roads - Part 2: Test methods |
|
DS DS/EN 12697- 1 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 1: Soluble binder content |
|
DS DS/EN 12697- 1/AC |
Bituminous mixtures - Test methods for hot mix asphalt - Part 1: Soluble binder content |
|
DS DS/EN 12697- 10 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 10: Compactability |
|
DS DS/EN 12697- 11 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate and bitumen |
|
DS DS/EN 12697- 12 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens |
|
DS DS/EN 12697- 13 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 13: Temperature measurement |
|
DS DS/EN 12697- 13/AC |
Bituminous mixtures - Test methods for hot mix asphalt - Part 13: Temperature measurement |
|
DS DS/EN 12697- 14 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 14: Water content |
|
DS DS/EN 12697- 14/AC |
Bituminous mixtures - Test methods for hot mix asphalt - Part 14: Water content |
|
DS DS/EN 12697- 15 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 15: Determination of the segregation sensitivity |
|
DS DS/EN 12697- 16 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 16: Abrasion by studded tyres |
|
DS DS/EN 12697- 17 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 17: Particle loss of porous asphalt specimen |
|
DS DS/EN 12697- 18 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 18: Binder drainage |
|
DS DS/EN 12697- 19 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 19: Permeability of specimen |
|
DS DS/EN 12697- 2 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 2: Determination of particle size distribution |
|
DS DS/EN 12697- 20 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 20: Indentation using cube or Marshall specimens |
|
DS DS/EN 12697- 21 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using plate specimens |
|
DS DS/EN 12697- 22 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel tracking |
|
DS DS/EN 12697- 23 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 23: Determination of the indirect tensile strength of bituminous specimens |
|
DS DS/EN 12697- 24 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue |
|
DS DS/EN 12697- 26 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness |
|
DS DS/EN 12697- 27 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 27: Sampling |
|
DS DS/EN 12697- 28 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 28: Preparation of samples for determining binder content, water content and grading |
|
DS DS/EN 12697- 29 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 29: Determination of the dimensions of bituminous specimen |
|
DS DS/EN 12697- 3 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitume recovery: Rotary evaporator |
|
DS DS/EN 12697- 30 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 30: Specimen preparation by impact compactor |
|
DS DS/EN 12697- 31 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation by gyratory compactor |
|
DS DS/EN 12697- 32 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor |
|
DS DS/EN 12697- 33 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 33: Specimen preparation by roller compactor |
|
DS DS/EN 12697- 34 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test |
|
DS DS/EN 12697- 36 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 36: Determination of the thickness of a bituminous pavement |
|
DS DS/EN 12697- 37 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA |
|
DS DS/EN 12697- 38 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration |
|
DS DS/EN 12697- 39 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 39: Binder content by ignition |
|
DS DS/EN 12697- 4 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 4: Bitumen recovery: Fractionating column |
|
DS DS/EN 12697- 41 |
Bituminous mixtures Test methods for hot mix asphalt Part 41: Resistance to de-icing fluids |
|
DS DS/EN 12697- 43 |
Bituminous mixtures Test methods for hot mix asphalt Part 43: Resistance to fuel |
|
DS DS/EN 12697- 5 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 5: Determination of the maximum density |
|
DS DS/EN 12697- 6 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bitumunous specimens |
|
DS DS/EN 12697- 7 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 7: Determination of bulk density of bituminous specimens by gamma rays |
|
DS DS/EN 12697- 8 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of void characteristics of bituminous specimens |
|
DS DS/EN 12697- 9 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 9: Determination of the reference density |
|
DS DS/EN 12699 |
Execution of special geotechnical work - Displacement piles |
|
DS DS/EN 12715 |
Execution of special geotechnical works - Grouting |
|
DS DS/EN 12716 |
Execution of special geotechnical works - Jet Grouting |
|
DS DS/EN 12767 |
Passive safety of support structures for road equipment - Requirements and test methods |
|
DS DS/EN 12794 |
Precast concrete products Foundation piles |
|
DS DS/EN 12802 |
Road marking materials - Laboratory methods for identification |
|
DS DS/EN 12842 |
Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
|
DS DS/EN 12889 |
Trenchless construction and testing of drains and sewers |
|
DS DS/EN 12899- 1 |
Fixed, vertical road traffic signs - Part 1: Fixed signs |
|
DS DS/EN 1293 |
Generel requirements for components used in pneumatically pressurized discharge pipes, drains and sewers |
|
DS DS/EN 1295- 1 |
Structural design of buried pipelines under various conditions of loading - Part 1: General requirements |
|
DS DS/EN 12954 |
Cathodic protection of buried or immersed metallic structures - General principles and application for pipelines |
|
DS DS/EN 12970 |
Mastic asphalt for waterproofing - Definitions, requirements and test methods |
|
DS DS/EN 13020 |
Road surface treatment machines Safety requirements |
|
DS DS/EN 13036- 1 |
Road and airfield surface characteristics - Test Methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique |
|
DS DS/EN 13036- 3 |
Road and airfield surface characteristics - Test methods - Part 3: Measurement of pavement surface horizontal drainability |
|
DS DS/EN 13036- 4 |
Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface - The pendulum test |
|
DS DS/EN 13036- 7 |
Road and airfield surface characteristics - Test methods - Part 7: Irregularity measurement of pavement courses: the straightedge test |
|
DS DS/EN 13043 |
Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas |
|
DS DS/EN 13043/AC |
Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas |
|
DS DS/EN 13101 |
Steps for underground man entry chambers - Requirements, marking, testing and evaluation of confirmity |
|
DS DS/EN 1317- 1 |
Road restraint systems - Part 1: Terminology and general criteria for test methods |
|
DS DS/EN 1317- 2 |
Road restraint systems - Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers |
|
DS DS/EN 1317- 3 |
Road restraint systems - Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions |
|
DS DS/EN 13174 |
Cathodic protection for harbour installations |
|
DS DS/EN 13197 |
Road marking materials - Wear simulators |
|
DS DS/EN 13201- 2 |
Road lighting - Part 2: Performance requirements |
|
DS DS/EN 13201- 3 |
Road lighting - Part 3: Calculation of performance-AC: 09/07/2005 |
|
DS DS/EN 13201- 4 |
Road lighting - Part 4: Methods of measuring lighting performance |
|
DS DS/EN 13212 |
Road marking materials - Requirements for the factory production control |
|
DS DS/EN 13244- 1 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1: General |
|
DS DS/EN 13244- 2 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 2: Pipes |
|
DS DS/EN 13244- 3 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 3: Fittings |
|
DS DS/EN 13244- 4 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4: Valves |
|
DS DS/EN 13244- 5 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 5: Fitness for purpose of the system |
|
DS DS/EN 13280 |
Specification for glass fibre reinforced cisterns of one piece and sectional construction, for the storage, above ground, of cold water |
|
DS DS/EN 13285 |
Unbound mixtures - Specifications |
|
DS DS/EN 13286- 1 |
Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling |
|
DS DS/EN 13286- 2 |
Unbound and hydraulically bound mixtures - Part 2: Test methods for the determination of the laboratory reference density and water content - Proctor compaction |
|
DS DS/EN 13286- 3 |
Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content - Vibrocompression with controlled parameters |
|
DS DS/EN 13286- 4 |
Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer |
|
DS DS/EN 13286- 40 |
Unbound and hydraulically bound mixtures - Part 40: Test method for the determination of the direct tensile strength of hydraulically bound mixtures |
|
DS DS/EN 13286- 41 |
Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures |
|
DS DS/EN 13286- 42 |
Unbound and hydraulically bound mixtures - Part 42: Test method for the determination of the indirect tensile strength of hydraulically bound mixtures |
|
DS DS/EN 13286- 43 |
Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures |
|
DS DS/EN 13286- 44 |
Unbound and hydraulically bound mixtures - Part 44: Test method for the determination of the alpha coefficient of vitrified blast furnace slag |
|
DS DS/EN 13286- 45 |
Unbound and hydraulically bound mixtures - Part 45: Test method for the determination of the workability period of hydraulically bound mixtures |
|
DS DS/EN 13286- 46 |
Unbound and hydraulically bound mixtures - Part 46: Test method for the determination of the moisture condition value |
|
DS DS/EN 13286- 47 |
Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling |
|
DS DS/EN 13286- 49 |
Unbound and hydraulically bound mixtures - Part 49: Accelerated swelling test for soil treated by lime and/or hydraulic binder |
|
DS DS/EN 13286- 5 |
Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and water content - Vibrating table |
|
DS DS/EN 13286- 50 |
Unbound and hydraulically bound mixtures Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction |
|
DS DS/EN 13286- 51 |
Unbound and hydraulically bound mixtures Part 51: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction |
|
DS DS/EN 13286- 52 |
Unbound and hydraulically bound mixtures Part 52: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrocompression |
|
DS DS/EN 13286- 53 |
Unbound and hydraulically bound mixtures Part 53: Methods for the manufacture of test specimens of hydraulically bound mixtures using axial compression |
|
DS DS/EN 13286- 7 |
Unbound and hydraulically bound mixtures - Part 7: Cyclic load triaxial test for unbound mixtures |
|
DS DS/EN 13331- 1 |
Trench lining systems - Part 1: Product specifications |
|
DS DS/EN 13331- 2 |
Trench lining systems - Part 2: Assessment by calculation or test |
|
DS DS/EN 13361 |
Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams |
|
DS DS/EN 13362 |
Geosynthetic Barriers Characteristics required for use in the construction of canals |
|
DS DS/EN 1337- 1 |
Structural bearings - Part 1: General design rules |
|
DS DS/EN 1337- 10 |
Structural bearings - Part 10: Inspection and maintenance |
|
DS DS/EN 1337- 11 |
Structural bearings - Part 11: Transport, storage and installation |
|
DS DS/EN 1337- 2 |
Structural bearings - Part 2: Sliding elements |
|
DS DS/EN 1337- 3 |
Structural bearings Part 3: Elastomeric bearings |
|
DS DS/EN 13375 |
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other surfaces trafficable by vehicles - Specimen preparation |
|
DS DS/EN 1337- 5 |
Structural bearings Part 5: Pot bearings |
|
DS DS/EN 1337- 6 |
Structural bearings - Part 6: Rocker bearings |
|
DS DS/EN 1337- 7 |
Structural bearings - Part 7: Spherical and cylindrical PTFE bearings |
|
DS DS/EN 1337- 9 |
Structural bearings - Part 9: Protection |
|
DS DS/EN 1338 |
Concrete paving blocks - Requirements and test methods |
|
DS DS/EN 13380 |
General requirements for components used for renovation and repair of drain and sewer systems outside buildings |
|
DS DS/EN 1339 |
Concrete paving flags - Requirements and test methods |
|
DS DS/EN 1340 |
Concrete kerb units - Requirements and test methods |
|
DS DS/EN 1341 |
Slabs of natural stone for external paving - Requirements and test methods |
|
DS DS/EN 1342 |
Setts of natural stone for external paving - Requirements and test methods |
|
DS DS/EN 1343 |
Kerbs of natural stone for external paving - Requirements and test methods |
|
DS DS/EN 1344 |
Clay pavers - Requirements and test methods |
|
DS DS/EN 13450 |
Aggregates for railway ballast |
|
DS DS/EN 13450 |
Aggregates for railway ballast |
|
DS DS/EN 13491 |
Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures |
|
DS DS/EN 13508- 1 |
Condition of drain and sewer systems outside buildings - Part 1: General requirements |
|
DS DS/EN 13508- 2 |
Conditions of drain and sewer systems outside buildings - Part 2: Visual inspection coding system |
|
DS DS/EN 13524 |
Highway maintenance machines - Safety requirements |
|
DS DS/EN 13566- 1 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General |
|
DS DS/EN 13566- 3 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes |
|
DS DS/EN 13566- 4 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes |
|
DS DS/EN 13588 |
Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test |
|
DS DS/EN 13598- 1 |
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers |
|
DS DS/EN 13653 |
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other areas of concrete trafficable by vehicles - Determination of shear strength |
|
DS DS/EN 13689 |
Guidance on the classification and design of plastics piping systems used for renovation |
|
DS DS/EN 13808 |
Bitumen and bituminous binders Framework for specifying cationic bitumen emulsions |
|
DS DS/EN 13863- 1 |
Concrete pavements - Part 1: Test method for the determination of the thickness of a concrete pavement by survey method |
|
DS DS/EN 13863- 2 |
Concrete pavements - Part 2: Test method for the determination of the bond between two layers |
|
DS DS/EN 13863- 3 |
Concrete pavements Part 3: Test methods for the determination of the thickness of a concrete pavement from cores |
|
DS DS/EN 13863- 4 |
Concrete pavements Part 4: Test methods for the determination of wear resistance of concrete pavements to studded tyres |
|
DS DS/EN 13877- 1 |
Concrete pavements - Part 1: Materials |
|
DS DS/EN 13877- 2 |
Concrete pavements - Part 2: Functional requirements for concrete pavements |
|
DS DS/EN 13877- 3 |
Concrete pavements Part 3: Specifications for dowels to be used in concrete pavements |
|
DS DS/EN 13880- 1 |
Hot applied joint sealants - Part 1: Test method for the determination of density at 25 øC |
|
DS DS/EN 13880- 10 |
Hot applied joint sealants - Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression |
|
DS DS/EN 13880- 11 |
Hot applied joint sealants - Part 11: Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements |
|
DS DS/EN 13880- 12 |
Hot applied joint sealants - Part 12: Test method for the manufacture of concrete test blocks for bond testing (recipe methods) |
|
DS DS/EN 13880- 13 |
Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test) |
|
DS DS/EN 13880- 2 |
Hot applied joint sealants - Part 2: Test method for the determination of cone penetration at 25 øC |
|
DS DS/EN 13880- 3 |
Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience) |
|
DS DS/EN 13880- 4 |
Hot applied joint sealants - Part 4: Test method for the determination of heat resistance - Change in penetration value |
|
DS DS/EN 13880- 5 |
Hot applied joint sealants - Part 5: Test method for the determination of flow resistance |
|
DS DS/EN 13880- 6 |
Hot applied joint sealants - Part 6: Method for the preparation of samples for testing |
|
DS DS/EN 13880- 7 |
Hot applied joint sealants - Part 7: Function testing of joint sealants |
|
DS DS/EN 13880- 8 |
Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion |
|
DS DS/EN 13880- 9 |
Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements |
|
DS DS/EN 1401- 1 |
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
|
DS DS/EN 14023 |
Bitumen and bituminous binders Framework specification for polymer modified bitumens |
|
DS DS/EN 14187- 1 |
Cold applied joint sealants - Part 1:Test method for the determination of rate of cure |
|
DS DS/EN 14187- 2 |
Cold applied joint sealants - Part 2:Test method for the determination of tack free time |
|
DS DS/EN 14187- 3 |
Cold applied joint sealants - Part 3: Test method for the determination of self-levelling properties |
|
DS DS/EN 14187- 4 |
Cold applied joint sealants - Part 4: Test method for the determination of the change in mass and volume after immersion in test fuel |
|
DS DS/EN 14187- 5 |
Cold applied joint sealants - Part 5: Test method for the determination of the resistance to hydrolysis |
|
DS DS/EN 14187- 6 |
Cold applied joint sealants - Part 6: Test method for the determination of the adhesion/cohesion properties after immersion in chemical liquids |
|
DS DS/EN 14187- 7 |
Cold applied joint sealants - Part 7: Test method for the determination of the resistance to flame |
|
DS DS/EN 14187- 8 |
Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation |
|
DS DS/EN 14188- 2 |
Joint fillers and sealants Part 2: Specifications for cold applied sealants |
|
DS DS/EN 14199 |
Execution of special geotechnical works Micropiles |
|
DS DS/EN 14227- 1 |
Hydraulically bound mixtures - Specifications - Part 1: Cement bound granular mixtures |
|
DS DS/EN 14227- 2 |
Hydraulically bound mixtures - Specifications - Part 2: Slag bound mixtures |
|
DS DS/EN 14227- 3 |
Hydraulically bound mixtures - Specifications - Part 3: Fly ash bound mixtures |
|
DS DS/EN 14227- 4 |
Hydraulically bound mixtures - Specifications - Part 4: Fly ash for hydraulically bound mixtures |
|
DS DS/EN 14227- 5 |
Hydraulically bound mixtures - Specifications - Part 5: Hydraulic road binder bound mixtures |
|
DS DS/EN 1423 |
Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two |
|
DS DS/EN 1423/A1 |
Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two-(AMENDS DS/EN 1423) |
|
DS DS/EN 1424 |
Road marking materials - Premix glass beads |
|
DS DS/EN 1424/A1 |
Road marking materials - Premix glass beads-(AMENDS DS/EN 1424) |
|
DS DS/EN 14260 |
Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: road tars - Characteristics and test methods |
|
DS DS/EN 1433 |
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity-Amendment 1:09/29/2005 |
|
DS DS/EN 1436 |
Road marking materials - Road marking performance for road users |
|
DS DS/EN 1436/A1 |
Road marking materials - Road marking performance for road users-(AMENDS DS/EN 1436) |
|
DS DS/EN 1437 |
Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading |
|
DS DS/EN 14389- 2 |
Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
|
DS DS/EN 14396 |
Fixed ladders for manholes |
|
DS DS/EN 14409- 1 |
Plastics piping systems for renovation of underground water supply networks - Part 1: General |
|
DS DS/EN 14409- 3 |
Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close fit-pipes |
|
DS DS/EN 14419 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Surveillance systems |
|
DS DS/EN 1444 |
Fibre-cement pipelines - Guide for laying and on-site work practices |
|
DS DS/EN 14457 |
General requirements for components specifically designed for use in trenchless constructions of drains and sewers |
|
DS DS/EN 14503 |
Inland navigation vessels - Harbours for inland navigation |
|
DS DS/EN 1452- 1 |
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General |
|
DS DS/EN 1452- 2 |
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes |
|
DS DS/EN 1452- 3 |
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings |
|
DS DS/EN 1452- 4 |
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves and ancillary equipment |
|
DS DS/EN 1452- 5 |
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5: Fitness for purpose of the system |
|
DS DS/EN 1456- 1 |
Plastics piping systems for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for piping components and the system |
|
DS DS/EN 14628 |
Ductile iron pipes, fittings and accessories External polyethylene coating for pipes Requirements and test methods |
|
DS DS/EN 1463- 1 |
Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements |
|
DS DS/EN 1463- 1/A1 |
Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements-(AMENDS DS/EN 1463-1) |
|
DS DS/EN 1463- 2 |
Road marking materials - Retroreflecting road studs - Part 2: Road test performance specifications |
|
DS DS/EN 14654- 1 |
Management and control of cleaning operations in drains and sewers Part 1: Sewer cleaning |
|
DS DS/EN 14691 |
Flexible sheets for waterproofing Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles Compatibility by heat conditioning |
|
DS DS/EN 14692 |
Flexible sheets for waterproofing Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles Determination of the resistance to compaction of an asphalt layer |
|
DS DS/EN 14694 |
Flexible sheets for waterproofing Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles Determination of resistance to dynamic water pressure after damage by pretreatment |
|
DS DS/EN 1536 |
Execution of special geotechnical work - Bored piles |
|
DS DS/EN 1537 |
Execution of special geotechnical work - Ground anchors |
|
DS DS/EN 1538 |
Execution of special geotechnical works - Diaphragm walls |
|
DS DS/EN 1610 |
Construction and testing of drains and sewers |
|
DS DS/EN 1636- 3 |
Plastics piping systems for non-pressure drainage and sewerage - Glass- reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 3: Fittings |
|
DS DS/EN 1636- 5 |
Plastics piping systems for non-pressure drainage and sewerage - Glass- reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 5: Fitness for purpose of the joints |
|
DS DS/EN 1671 |
Pressure sewerage systems outside buildings |
|
DS DS/EN 1790 |
Road marking materials - Preformed road markings |
|
DS DS/EN 1793- 1 |
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption |
|
DS DS/EN 1793- 2 |
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation |
|
DS DS/EN 1793- 3 |
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 3: Normalized traffic noise spectrum |
|
DS DS/EN 1794- 1 |
Road traffic noise reducing devices - Non-acoustic performance - Part 1: Mechanical performance and stability requirements |
|
DS DS/EN 1794- 2 |
Road traffic noise reducing devices - Non-acoustic performance - Part 2: General safety and environmental requirements |
|
DS DS/EN 1824 |
Road marking materials - Road trials |
|
DS DS/EN 1852- 1 |
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system |
|
DS DS/EN 1852- 1/A1 |
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system- (AMENDS DS/EN 1852-1) |
|
DS DS/EN 1871 |
Road marking materials - Physical properties |
|
DS DS/EN 1916 |
Concrete pipes and fittings, unreinforced, steel fibre and reinforced |
|
DS DS/EN 1917 |
Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced |
|
DS DS/EN 1989 |
Thermoplastics piping systems - Joints for buried non-pressure sewage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure |
|
DS DS/EN 1991- 2 |
Eurocode 1: Actions on structures - Part 2: Traffic loads on bridges |
|
DS DS/EN 1992- 2 |
Eurocode 2 Design of concrete structures Concrete bridges Design and detailing rules-Replaces DS/ENV 1992-2:1996 |
|
DS DS/EN 1995- 2 |
Eurocode 5: Design of timber structures - Part 2: Bridges |
|
DS DS/EN 1998- 5 |
Eurocode 8: Design of structures for earthquake resistance - Part 5: Foundations, retaining structures and geotechnical aspects |
|
DS DS/EN 253 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene |
|
DS DS/EN 295- 1 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 1: Requirements |
|
DS DS/EN 295- 1/A1 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 1: Requirements-(AMENDS DS/EN 295-1) |
|
DS DS/EN 295- 1/A2 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 1: Requirements-(AMENDS DS/EN 295-1) |
|
DS DS/EN 295- 1/A3 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 1: Requirements-(AMENDS DS/EN 295-1) |
|
DS DS/EN 295- 10 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers Part 10: Performance requirements |
|
DS DS/EN 295- 2 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 2: Quality control and sampling |
|
DS DS/EN 295- 2/A1 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 2: Quality control and sampling-(AMENDS DS/EN 295-2) |
|
DS DS/EN 295- 3 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 3: Test methods |
|
DS DS/EN 295- 3/A1 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 3: Test methods-(AMENDS DS/EN 295-3) |
|
DS DS/EN 295- 4 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 4: Requirements for special fittings, adaptors and compatible accessories |
|
DS DS/EN 295- 4/AC |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 4: Requirements for special fittings, adaptors and compatible accessories |
|
DS DS/EN 295- 5 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 5: Requirements for perforated vitrified clay pipes and fittings |
|
DS DS/EN 295- 5/A1 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 5: Requirements for perforated vitrified clay pipes and fittings-(AMENDS DS/EN 295- 5) |
|
DS DS/EN 295- 6 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 6: Requirements for vitrified clay manholes |
|
DS DS/EN 295- 7 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 7: Requirements for vitrified clay pipes and joints for pipe jacking |
|
DS DS/EN 40- 1 |
Lighting columns - Part 1: Definitions and terms |
|
DS DS/EN 40- 2 |
Lighting columns - Part 2: General requirements and dimensions |
|
DS DS/EN 40-3- 1 |
Lighting columns - Part 3-1: Design and verification - Specification for characteristic loads |
|
DS DS/EN 40-3- 2 |
Lighting columns - Part 3-2: Design and verification - Verification by testing |
|
DS DS/EN 40-3- 3 |
Lighting columns - Part 3-3: Design and verification - Verification by calculation |
|
DS DS/EN 40- 5 |
Lighting columns - Part 5: Specification for steel lighting columns |
|
DS DS/EN 40- 6 |
Lighting columns - Part 6: Specification for aluminium lighting columns |
|
DS DS/EN 40- 7 |
Lighting columns - Part 7: Requirements for fibre reinforced polymer composite lighting columns |
|
DS DS/EN 448 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
|
DS DS/EN 448 RU |
Preinsulated bonded pipe systems for underground hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene (PE) |
|
DS DS/EN 488 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
|
DS DS/EN 489 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
|
DS DS/EN 489 RU |
Preinsulated bonded pipe systems for underground hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene (PE) |
|
DS DS/EN 50293 |
Electromagnetic compatibility - Road traffic signal systems - Product standard |
|
DS DS/EN 512 |
Fibre-cement products - Pressure pipes and joints |
|
DS DS/EN 512/A1 |
Fibre-cement products - Pressure pipes and joints-(AMENDS DS/EN 512) |
|
DS DS/EN 545 |
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
|
DS DS/EN 588- 1 |
Fibre-cement pipes for sewer and drains - Part 1: Pipes, joints and fittings for gravity systems |
|
DS DS/EN 588- 2 |
Fibre cement pipes for drains and sewers - Part 2: Manholes and inspection chambers |
|
DS DS/EN 598 |
Ductile iron pipes, fittings, accessories and their joints for sewerage application - Requirements and tests methods |
|
DS DS/EN 60598-2- 3 |
Luminaires Part 2-3: Particular requirements Luminaires for road and street lighting |
|
DS DS/EN 61821 |
Electrical installations for lighting and beaconing of aerodromes - Maintenance of aeronautical ground lighting constant current series circuits |
|
DS DS/EN 61822 |
Electrical installations for lighting and beaconing of aerodromes - Constant current regulators |
|
DS DS/EN 61823 |
Electrical installations for lighting and beaconing of aerodromes - AGL series transformers |
|
DS DS/EN 639 |
Common requirements for concrete pressure pipes including joints and fittings |
|
DS DS/EN 640 |
Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings |
|
DS DS/EN 641 |
Reinforced concrete pressure pipes, cylinder type, including joints and fittings |
|
DS DS/EN 642 |
Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes |
|
DS DS/EN 752- 1 |
Drain and sewer systems outside buildings - Part 1: Generalities and definitions |
|
DS DS/EN 752- 2 |
Drain and sewer systems outside buildings - Part 2: Performance requirements |
|
DS DS/EN 752- 3 |
Drain and sewer systems outside buildings - Part 3: Planning |
|
DS DS/EN 752- 4 |
Drain and sewer systems outside buildings - Part 4: Hydraulic design and environmental considerations |
|
DS DS/EN 752- 5 |
Drain and sewer systems outside buildings - Part 5: Rehabilitation |
|
DS DS/EN 752- 6 |
Drain and sewer systems outside buildings - Part 6: Pumping installations |
|
DS DS/EN 752- 7 |
Drain and sewer systems outside buildings - Part 7: Maintenance and operations |
|
DS DS/EN 773 |
General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers |
|
DS DS/EN 805 |
Water supply - Requirements for systems and components outside buildings |
|
DS DS/EN 815 |
Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock |
|
DS DS/EN ISO 11819- 1 |
Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical Pass-By method |
|
DS DS/EN ISO 13473- 1 |
Characterization of pavement texture by use of surface profiles - Part 1: Determination of Mean Profile Depth |
|
DS DS/EN ISO 13793 |
Thermal performance of buildings - Thermal design of foundations to avoid frost heave |
|
DS DS/EN ISO 14688- 1 |
Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description |
|
DS DS/EN ISO 14688- 2 |
Geotechnical investigation and testing - Identification and classification of soil - Part 2: Principles for a classification |
|
DS DS/EN ISO 14689- 1 |
Geotechnical investigation and testing - Identification and classification of rock - Part 1: Identification and description |
|
DS DS/EN ISO 22476- 2 |
Geotechnical investigation and testing Field testing Part 2: Dynamic probing |
|
DS DS/EN ISO 22476- 3 |
Geotechnical investigation and testing Field testing Part 3: Standard penetration test |
|
DS DS/EN ISO 8795 |
Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values for plastics pipes and fittings and their joints |
|
DS DS/ENV 1046 |
Plastics piping and ducting systems - Systems outside building structures for the conveyance of water or sewage - Practices for installation above and below ground |
|
DS DS/ENV 1090- 5 |
Execution of steel structures - Part 5: Supplementary rules for bridges |
|
DS DS/ENV 12633 |
Method of determination of unpolished and polished slip/skid resistance value |
|
DS DS/ENV 1317- 4 |
Road restraint systems - Part 4: Performance classes, impact test acceptance criteria and test methods for terminals and transitions of safety barriers |
|
DS DS/ENV 13282 |
Hydraulic road binders - Composition, specifications and conformity criteria |
|
DS DS/ENV 13459- 1 |
Road marking materials - Quality control - Part 1: Sampling from storage and testing |
|
DS DS/ENV 13459- 2 |
Road marking materials - Quality control - Part 2: Guidelines for preparing quality plans for materials application |
|
DS DS/ENV 13459- 3 |
Road marking materials - Quality control - Part 3: Performance in use |
|
DS DS/ENV 13563 |
Traffic control equipment - Vehicle detectors |
|
DS DS/ENV 13803- 1 |
Railway applications - Track alignment design parameters - Track gauges 1435 mm and wider - Part 1: Plain line |
|
DS DS/ENV 1401- 2 |
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for assessment of conformity |
|
DS DS/ENV 1401- 3 |
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Guidance for installation |
|
DS DS/ENV 1452- 6 |
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 6: Guidance for installation |
|
DS DS/ENV 1452- 7 |
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance for the assessment of conformity |
|
DS DS/ENV 1852- 2 |
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 2:Guidance for the asessment of conformity |
|
DS DS/ENV 1993- 2 |
Eurocode 3: Design of steel structures - Part 2: Steel bridges |
|
DS DS/ENV 1993- 5 |
Eurocode 3: Design of steel structures - Part 5: Piling |
|
DS DS/ENV 1994- 2 |
Eurocode 4: Design of composite steel and concrete structures - Part 2: Composite bridges |
|
DS DS/ENV 1997- 1 |
Eurocode 7: Geotechnical design - Part 1: General rules |
|
DS DS/ENV 1997-1 + NAD |
Eurocode 7: Geotechnical Design Part 1: General rules, inclusive National Application Document |
|
DS DS/ENV 1997-1 + NAD E |
Eurocode 7: Geotechnical Design Part 1: General rules, inclusive National Application Document |
|
DS DS/ENV 1997- 2 |
Eurocode 7: Geotechnical design - Part 2: Design assisted by laboratory testing |
|
DS DS/ENV 1997- 3 |
Eurocode 7: Geotechnical design - Part 3: Design assisted by field testing |
|
DS DS/ENV 1998- 2 |
Eurocode 8 - Design provisions for earthquake resistance of structures - Part 2: Bridges |
|
DS DS/ENV 50230 |
Aeronautical ground lighting electrical installation - Control and monitoring systems: General requirements |
|
DS DS/ENV 50231 |
Aeronautical ground lighting electrical installation - Constant current regulator: Equipment specifications and tests |
|
DS DS/ENV 50232 |
Aeronautical ground lighting electrical installation - Isolating transformer: Equipment specifications and tests |
|
DS DS/ENV 852 |
Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Guidance on the interpretation of laboratory derived migration values |
|
DS DS/HD 638 S1 |
Road traffic signal systems |
|
DS DS/IEC/TS 62143 |
Electrical installations for lighting and beaconing of aerodromes - Aeronautical ground lighting systems - Guidelines for the development of a safety lifecycle methodology |
|
DS DS/INF 156 |
Guidance paper - Application of the standards for concrete paving blocks, flags and kerb units - DS/EN 1338, DS/EN 1339 og DS/EN 1340 |
|
DS DS/INF 161 |
Plastics pipes - Soil and waste discharge, sewerage and drainage - Glossary of terms |
|
DS DS/ISO 13472- 1 |
Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 1: Extended surface method |
|
DS DS/ISO 4067/6 |
Technical drawings - Installations - Part 6: Graphical symbols for supply water and drainage systems in the ground |
|
DS DS/ISO/PAS 20858 |
Ships and marine technology - Maritime port facility security assessments and security plan development |
|
DS DS/ISO/TS 15624 |
Transport information and control systems - Traffic Impediment Warning Systems (TIWS) - System requirements |