|
DS DS/EN 1015- 7 |
Methods of test for mortar for masonry - Part 7: Determination of air content of fresh mortar |
|
DS DS/EN 1015- 9 |
Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar |
|
DS DS/EN 1024 |
Clay roofing tiles for discontinuous laying - Determination of geometric characteristics |
|
DS DS/EN 1026 |
Windows and doors - Air permeability - Test method |
|
DS DS/EN 1027 |
Windows and doors - Watertightness - Test method |
|
DS DS/EN 1052- 1 |
Method of test for masonry - Part 1: Determination of compressive strength |
|
DS DS/EN 1052- 2 |
Methods of test for masonry - Part 2: Determination of flexural strength |
|
DS DS/EN 1052- 3 |
Methods of test for masonry - Part 3: Determination of initial shear strength |
|
DS DS/EN 1052- 4 |
Methods of test for masonry - Part 4: Determination of shear strength including damp proof course |
|
DS DS/EN 1052- 5 |
Methods of test for masonry Part 5: Determinaton of bond strength by the bond wrench method |
|
DS DS/EN 1053 |
Plastics piping systems - Thermoplastics piping systems for non- pressure applications - Test method for watertightness |
|
DS DS/EN 1054 |
Plastics piping systems - Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints |
|
DS DS/EN 1055 |
Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling |
|
DS DS/EN 1057 |
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
|
DS DS/EN 1065 |
Adjustable telescopic steel props - Product specification, design and assessment by calculation and tests |
|
DS DS/EN 1075 |
Timber structures - Test methods - Joints made with punched metal plate fasteners |
|
DS DS/EN 1097- 1 |
Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval) |
|
DS DS/EN 1097- 1/A1 |
Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)-(AMENDS DS/EN 1097-1) |
|
DS DS/EN 1097- 10 |
Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height |
|
DS DS/EN 1097- 2 |
Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation |
|
DS DS/EN 1097- 3 |
Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids |
|
DS DS/EN 1097- 4 |
Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler |
|
DS DS/EN 1097- 5 |
Test for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven |
|
DS DS/EN 1097- 6 |
Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
|
DS DS/EN 1097- 6/AC |
Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
|
DS DS/EN 1097- 7 |
Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method |
|
DS DS/EN 1097- 8 |
Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value |
|
DS DS/EN 1097- 9 |
Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test |
|
DS DS/EN 1107- 1 |
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of dimensional stability |
|
DS DS/EN 1107- 2 |
Flexible sheets for waterproofing - Determination of dimensional stability - Part 2: Plastic and rubber sheets for roof waterproofing |
|
DS DS/EN 1108 |
Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of form stability under cyclical temperature changes |
|
DS DS/EN 1109 |
Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature |
|
DS DS/EN 111 |
Wall-hung hand rinse basins - Connecting dimensions |
|
DS DS/EN 1110 |
Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flow restistance at elevated temperature |
|
DS DS/EN 1111 |
Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification |
|
DS DS/EN 1112 |
Shower outlets for (PN 10) sanitary tapware |
|
DS DS/EN 1113 |
Showers hoses for (PN 10) sanitary tapware |
|
DS DS/EN 1121 |
Doors - Behaviour between two different climates - Test method |
|
DS DS/EN 1123- 1 |
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control |
|
DS DS/EN 1123- 1/A1 |
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control-(AMENDS DS/EN 1123-1) |
|
DS DS/EN 1123- 2 |
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 2: Dimensions |
|
DS DS/EN 1125 |
Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods |
|
DS DS/EN 1125/A1 |
Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods-(AMENDS DS/EN 1125) |
|
DS DS/EN 1125/A1/AC |
Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods |
|
DS DS/EN 115 |
Safety rules for the construction and installation of escalators and passenger conveyors |
|
DS DS/EN 115/A1 |
Safety rules for the construction and installation of escalators and passenger conveyors-(AMENDS DS/EN 115) |
|
DS DS/EN 115/A2 |
Safety rules for the construction and installation of escalators and passenger conveyors-(AMENDS DS/EN 115) |
|
DS DS/EN 1154 |
Building hardware - Controlled door closing devices - Requirements and test methods |
|
DS DS/EN 1154/A1 |
Building hardware - Controlled door closing devices - Requirements and test methods |
|
DS DS/EN 1155 |
Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods |
|
DS DS/EN 1155/A1 |
Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods-, (AMENDS DS/EN 1155) |
|
DS DS/EN 1158 |
Building hardware - Door coordinator devices - Requirements and test methods |
|
DS DS/EN 1158/A1 |
Building hardware - Door coordinator devices - Requirements and test methods-, (AMENDS DS/EN 1158) |
|
DS DS/EN 1168 |
Precast concrete products Hollow core slabs |
|
DS DS/EN 1169 |
Precast concrete products - General rules for factory production control of glass-fibre reinforced cement |
|
DS DS/EN 1170- 1 |
Precast concrete products - Test method for glass-fibre reinforced cement - Part 1: Measuring the consistency of the matrix "Slump test" method |
|
DS DS/EN 1170- 2 |
Precast concrete products - Test method for glass-fibre reinforced cement - Part 2: Measuring the fibre content in fresh GRC, "Wash out test" |
|
DS DS/EN 1170- 3 |
Precast concrete products - Test method for glass-fibre reinforced cement - Part 3: Measuring the fibre content of sprayed GRC |
|
DS DS/EN 1170- 4 |
Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, "Simplified bending test" method |
|
DS DS/EN 1170- 5 |
Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, "Complete bending test" method |
|
DS DS/EN 1170- 6 |
Precast concrete products - Test method for glass-fibre reinforced cement - Part 6: Determination of the absorption of water by immersion and determination of the dry density |
|
DS DS/EN 1170- 7 |
Precast concrete products - Test method for glass-fibre reinforced cement - Part 7: Measurement of extremes of dimensional variations due to moisture content |
|
DS DS/EN 1191 |
Windows and doors - Resistance to repeated opening and closing - Test method |
|
DS DS/EN 1192 |
Doors - Classification of strength requirements |
|
DS DS/EN 1195 |
Timber structures - Test methods - Performance of structural floor decking |
|
DS DS/EN 12001 |
Conveying, spraying and placing machines for concrete and mortar - Safety requirements |
|
DS DS/EN 12002 |
Adhesives for tiles - Determination of transverse deformation for cementitious adhesives and grouts |
|
DS DS/EN 12003 |
Adhesives for tiles - Determination of shear adhesion strength of reaction resin adhesives |
|
DS DS/EN 12004 |
Adhesives for tiles - Definitions and specifications |
|
DS DS/EN 12004/A1 |
Adhesives for tiles - Definitions and specifications-(AMENDS DS/EN 12004) |
|
DS DS/EN 12004/A1/AC |
Adhesives for tiles - Definitions and specifications |
|
DS DS/EN 12015 |
Electromagnetic compatibility - product family standard for lifts, escalators and passenger conveyors - Emission |
|
DS DS/EN 12016 |
Electromagnetic compatibility - Product family standard for lifts, escalators and passenger conveyors - Immunity |
|
DS DS/EN 12039 |
Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of adhesion of granules |
|
DS DS/EN 12045 |
Shutters and blinds power operated - Safety in use - Measurement of the transmitted force |
|
DS DS/EN 12046- 1 |
Operating forces - Test method - Part 1: Windows |
|
DS DS/EN 12046- 2 |
Operating forces - Test method - Part 2: Doors |
|
DS DS/EN 12050- 1 |
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 1: Lifting plants for wastewater containing faecal matter |
|
DS DS/EN 12050- 2 |
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 2: Lifting plants for faecal-free wastewater |
|
DS DS/EN 12050- 3 |
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 3: Lifting plants for wastewater containing faecal matter for limited applications |
|
DS DS/EN 12050- 4 |
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter |
|
DS DS/EN 12051 |
Building hardware - Door and window bolts - Requirements and test methods |
|
DS DS/EN 12056- 1 |
Gravity drainage systems inside buildings - Part 1: General and performance requirements |
|
DS DS/EN 12056- 2 |
Gravity drainage systems inside buildings - Part 2: Sanitary pipework, layout and calculation |
|
DS DS/EN 12056- 3 |
Gravity drainage systems inside buildings - Part 3: Roof drainage, layout and calculation |
|
DS DS/EN 12056- 4 |
Gravity drainage systems inside buildings - Part 4: Wastewater liftings plants - Layout and calculation |
|
DS DS/EN 12056- 5 |
Gravity drainage systems inside buildings - Part 5: Installation and testing, instructions for operation, maintenance and use |
|
DS DS/EN 12085 |
Thermal insulating products for building applications - Determination of linear dimensions of test specimens |
|
DS DS/EN 12086 |
Thermal insulating products for building applications - Determination of water vapour transmission properties |
|
DS DS/EN 12087 |
Thermal insulating products for building applications - Determination of long term water absorption by immersion |
|
DS DS/EN 12088 |
Thermal insulating products for building applications - Determination of long term water absorption by diffusion |
|
DS DS/EN 12089 |
Thermal insulating products for building applications - Determination of bending behaviour |
|
DS DS/EN 12090 |
Thermal insulating products for building applications - Determination of shear behaviour |
|
DS DS/EN 12091 |
Thermal insulating products for building applications - Determination of freeze-thaw resistance |
|
DS DS/EN 12095 |
Plastics piping systems - Brackets for rainwater piping systems - Test method for bracket strength |
|
DS DS/EN 121 |
Extruded ceramic tiles with low water absorption (E<=3%) - Group A 1 |
|
DS DS/EN 12109 |
Vacuum drainage systems inside buildings |
|
DS DS/EN 12114 |
Thermal performance of buildings - Air permeability of building components and building elements - Laboratory test method |
|
DS DS/EN 1213 |
Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements |
|
DS DS/EN 12149 |
Wallcoverings in roll form - Determination of migration of heavy metals and certain other elements, of vinyl chloride monomer and of formaldehyde release |
|
DS DS/EN 12152 |
Curtain walling - Air permeability - Performance requirements and classification |
|
DS DS/EN 12153 |
Curtain walling - Air permeability - Test method |
|
DS DS/EN 12154 |
Curtain walling - Watertightness - Performance requirements and classification |
|
DS DS/EN 12155 |
Curtain walling - Watertightness - Laboratory test under static pressure |
|
DS DS/EN 12170 |
Heating systems in buildings - Procedure for the preparation of documents for operation, maintenance and use - Heating systems requiring a trained operator |
|
DS DS/EN 12171 |
Heating systems in buildings - Procedure for the preparation of documents for operation, maintenance and use - Heating systems not requiring a trained operator |
|
DS DS/EN 12179 |
Curtain walling - Resistance to wind load - Test method |
|
DS DS/EN 12188 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion steel-to-steel for characterisation of structural bonding agents |
|
DS DS/EN 12189 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of open time |
|
DS DS/EN 12190 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar |
|
DS DS/EN 12192- 1 |
Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar |
|
DS DS/EN 12192- 2 |
Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents |
|
DS DS/EN 12193 |
Light and lighting - Sports lighting |
|
DS DS/EN 12194 |
Shutters, external and internal blinds - Misuse - Test methods |
|
DS DS/EN 12200- 1 |
Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
|
DS DS/EN 12201- 1 |
Plastics piping systems for water supply - Polyethylene (PE) - Part 1: General |
|
DS DS/EN 12201- 2 |
Plastics piping systems for water supply - Polyethylene (PE) - Part 2: Pipes |
|
DS DS/EN 12201- 3 |
Plastics piping systems for water supply - Polyethylene (PE) - Part 3: Fittings |
|
DS DS/EN 12201- 4 |
Plastics piping systems for water supply - Polyethylene (PE) - Part 4: Valves |
|
DS DS/EN 12201- 5 |
Plastics piping systems for water supply - Polyethylene (PE) - Part 5: Fitness for purpose of the system |
|
DS DS/EN 12207 |
Windows and doors - Air permeability - Classification |
|
DS DS/EN 12208 |
Windows and doors - Watertightness - Classification |
|
DS DS/EN 12209 |
Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods |
|
DS DS/EN 12210 |
Windows and doors - Resistance to wind load - Classification |
|
DS DS/EN 12210/AC |
Windows and doors - Resistance to wind load - Classification |
|
DS DS/EN 12211 |
Windows and doors - Resistance to wind load - Test method |
|
DS DS/EN 12216 |
Shutters, external blinds, internal blinds - Terminology, glossary and definitions |
|
DS DS/EN 12217 |
Doors - Operating forces - Requirements and classification |
|
DS DS/EN 12219 |
Doors - Climatic influences - Requirements and classification |
|
DS DS/EN 12220 |
Ventilation for buildings - Ductwork - Dimensions of circular flanges for general ventilation |
|
DS DS/EN 12236 |
Ventilation for buildings - Ductwork hangers and supports - Requirements for strength |
|
DS DS/EN 12237 |
Ventilation for buildings - Ductwork - Strenght and leakage of circular sheet metal ducts |
|
DS DS/EN 12238 |
Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for mixed flow application |
|
DS DS/EN 12239 |
Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for displacement flow applications |
|
DS DS/EN 12269- 1 |
Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the "beam test" - Part 1: Short term test |
|
DS DS/EN 12269- 2 |
Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the "beam test" - Part 2: Long term test |
|
DS DS/EN 12279 |
Gas supply systems - Gas pressure regulations installations on service lines - Functional requirements-Amendment A1: 10/03/2005 |
|
DS DS/EN 12310- 1 |
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of resistance to tearing (nail shank) |
|
DS DS/EN 12310- 2 |
Flexible sheets for waterproofing - Determination of resistance to tearing - Part 2: Plastic and rubber sheets for roof waterproofing |
|
DS DS/EN 12311- 1 |
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties |
|
DS DS/EN 12311- 2 |
Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing |
|
DS DS/EN 12316- 1 |
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of peel resistance of joints |
|
DS DS/EN 12316- 2 |
Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing |
|
DS DS/EN 12317- 1 |
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of shear resistance of joints |
|
DS DS/EN 12317- 2 |
Flexible sheets for waterproofing - Determination of shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing |
|
DS DS/EN 12320 |
Building hardware - Padlocks and padlock fittings - Requirements and test methods |
|
DS DS/EN 12326- 1 |
Slate and stone products for discontinuous roofing and cladding - Part 1: Product specification |
|
DS DS/EN 12326- 2 |
Slate and stone products for discontinuous roofing and cladding - Part 2: Methods of test |
|
DS DS/EN 12326- 2/A1 |
Slate and stone products for discontinuous roofing and cladding - Part 2: Methods of test-(AMENDS DS/EN 12326-2) |
|
DS DS/EN 12327 |
Gas supply systems - Pressure testing, commissioning and decommissioning procedures - Functional requirements |
|
DS DS/EN 12348 |
Core drilling machines on stand - Safety |
|
DS DS/EN 12350- 1/AC |
Testing fresh concrete - Part 1: Sampling |
|
DS DS/EN 12350- 2 |
Testing fresh concrete - Part 2: Slump test |
|
DS DS/EN 12350- 3 |
Testing fresh concrete - Part 3: Vebe test |
|
DS DS/EN 12350- 4 |
Testing fresh concrete - Part 4: Degree of compactability |
|
DS DS/EN 12350- 5 |
Testing fresh concrete - Part 5: Flow table test |
|
DS DS/EN 12350- 6 |
Testing fresh concrete - Part 6: Density |
|
DS DS/EN 12350- 7 |
Testing fresh concrete - Part 7: Air content - Pressure methods |
|
DS DS/EN 12354- 1 |
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms |
|
DS DS/EN 12354- 2 |
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms |
|
DS DS/EN 12354- 3 |
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 3: Airborne sound insulation against outdoor sound |
|
DS DS/EN 12354- 4 |
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 4: Transmission of indoor sound to the outside |
|
DS DS/EN 12354- 6 |
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 6: Sound absorption in enclosed spaces |
|
DS DS/EN 12365- 1 |
Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification |
|
DS DS/EN 12365- 2 |
Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 2: Linear compression force test methods |
|
DS DS/EN 12365- 3 |
Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 3: Deflection recovery test method |
|
DS DS/EN 12365- 4 |
Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 4: Recovery after accelerated ageing test method |
|
DS DS/EN 12370 |
Natural stone test methods - Determination of resistance to salt crystallisation |
|
DS DS/EN 12371 |
Natural stone test methods - Determination of frost resistance |
|
DS DS/EN 12372 |
Natural stone test methods - Determination of flexural strength under concentrated load |
|
DS DS/EN 12372/AC |
Natural stone test methods - Determination of flexural strength under concentrated load |
|
DS DS/EN 12380 |
Air admittance valves for drainage systems - Requirements, test methods and evaluation of conformity |
|
DS DS/EN 12390- 1 |
Testing hardened concrete - Part 1: Shape, dimensions and other requirements for test specimens and moulds |
|
DS DS/EN 12390- 1/AC |
Testing hardened concrete - Part 1: Shape, dimensions and other requirements for test specimens and moulds |
|
DS DS/EN 12390- 2 |
Testing hardened concrete - Part 2: Making and curing specimens for strength tests |
|
DS DS/EN 12390- 3 |
Testing hardened concrete - Part 3: Compressive strength of test specimens |
|
DS DS/EN 12390- 4 |
Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines |
|
DS DS/EN 12390- 5 |
Testing hardened concrete - Part 5: Flexural strength of test specimens |
|
DS DS/EN 12390- 5/AC |
Testing hardened concrete - Part 5: Flexural strength of test specimens |
|
DS DS/EN 12390- 6 |
Testing hardened concrete - Part 6: Tensile splitting strength of test specimens |
|
DS DS/EN 12390- 6/AC |
Testing hardened concrete - Part 6: Tensile splitting strength of test specimens |
|
DS DS/EN 12390- 7 |
Testing hardened concrete - Part 7: Density of hardened concrete |
|
DS DS/EN 12390- 7/AC |
Testing hardened concrete - Part 7: Density of hardened concrete |
|
DS DS/EN 12390- 8 |
Testing hardened concrete - Part 8: Depth of penetration of water under pressure |
|
DS DS/EN 12391- 1 |
Chimneys - Execution standard for metal chimneys - Part 1: Chimneys for non-roomsealed heating appliances |
|
DS DS/EN 12400 |
Windows and pedestrian doors - Mechanical durability - Requirements and classification |
|
DS DS/EN 12405 |
Gas meters - Gas-volume electronic conversion devices |
|
DS DS/EN 12405- 1 |
Gas meters Conversion devices Part 1: Volume conversion |
|
DS DS/EN 12407 |
Natural stone test methods - Petrographic examination |
|
DS DS/EN 12412- 2 |
Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 2: Frames |
|
DS DS/EN 12412- 4 |
Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 4: Roller shutter boxes |
|
DS DS/EN 12418 |
Masonry and stone cutting-off machines for job site - Safety |
|
DS DS/EN 12424 |
Industrial, commercial and garage doors and gates - Resistance to wind load - Classification |
|
DS DS/EN 12425 |
Industrial, commercial and garage doors and gates - Resistance to water penetration - Classification |
|
DS DS/EN 12426 |
Industrial, commercial and garage doors and gates - Air permeability - Classification |
|
DS DS/EN 12427 |
Industrial, commercial and garage doors and gates - Air permeability - Test method |
|
DS DS/EN 12428 |
Industrial, commercial and garage doors and gates - Thermal transmittance - Requirements for the calculation |
|
DS DS/EN 12429 |
Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions |
|
DS DS/EN 12430 |
Thermal insulating products for building applications - Determination of behaviour under point load |
|
DS DS/EN 12431 |
Thermal insulating products for building applications - Determination of thickness for floating floor insulating products |
|
DS DS/EN 12433- 1 |
Industrial, commercial and garage doors and gates - Terminology - Part 1: Types of doors |
|
DS DS/EN 12433- 2 |
Industrial, commercial and garage doors and gates - Terminology - Part 2: Parts of doors |
|
DS DS/EN 12444 |
Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation |
|
DS DS/EN 12445 |
Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods |
|
DS DS/EN 12446 |
Chimneys - Components - Concrete outer wall elements |
|
DS DS/EN 12453 |
Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements |
|
DS DS/EN 12464- 1 |
Light and lighting - Lighting of work places - Part 1: Indoor work places |
|
DS DS/EN 12467 |
Fibre-cement flat sheets - Product specifications and test methods |
|
DS DS/EN 12480 |
Gas meters - Rotary displacement gas meters |
|
DS DS/EN 12489 |
Industrial, commercial and garage doors and gates - Resistance to water penetration - Test method |
|
DS DS/EN 12504- 1 |
Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression |
|
DS DS/EN 12504- 2 |
Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number |
|
DS DS/EN 12504- 3 |
Testing concrete in structures Part 3: Determination of pull-out force |
|
DS DS/EN 12504- 4 |
Testing concrete - Part 4: Determination of ultrasonic pulse velocity |
|
DS DS/EN 12512 |
Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners-Amendment 1: 11/22/2005 |
|
DS DS/EN 12519 |
Windows and pedestrian doors - Terminology |
|
DS DS/EN 12524 |
Building materials and products - Hygrothermal properties - Tabulated design values |
|
DS DS/EN 1253- 1 |
Gullies for buildings - Part 1: Requirements |
|
DS DS/EN 1253- 2 |
Gullies for buildings - Part 2: Test methods |
|
DS DS/EN 1253- 3 |
Gullies for buildings - Part 3: Quality control |
|
DS DS/EN 1253- 4 |
Gullies for buildings - Part 4: Access covers |
|
DS DS/EN 1253- 5 |
Gullies for buildings - Part 5: Gullies with light liquids closure |
|
DS DS/EN 12541 |
Sanitary tapware - Pressure flushing valves and automatic closing urinal valves PN 10 |
|
DS DS/EN 12589 |
Ventilation for buildings - Air terminal units - Aerodynamic testing and rating of constant and variable rate terminal units |
|
DS DS/EN 12599 |
Ventilation for buildings - Test procedures and measuring methods for handing over installed ventilation and air conditioning systems |
|
DS DS/EN 12599/AC |
Ventilation for buildings - Test procedures and measuring methods for handing over installed ventilation and air conditioning systems |
|
DS DS/EN 12600 |
Glass in building - Pendulum test - Impact test method for flat glass |
|
DS DS/EN 12604 |
Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements |
|
DS DS/EN 12605 |
Industrial, commercial and garage doors and gates - Mechanical aspects - Test Methods |
|
DS DS/EN 12608 |
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods |
|
DS DS/EN 12614 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of glass transition temperatures of polymers |
|
DS DS/EN 12615 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of slant shear strength |
|
DS DS/EN 12617- 1 |
Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS) |
|
DS DS/EN 12617- 2 |
Products and systems for the protection and repair of concrete structures Test methods Part 2: Shrinkage of crack injection products based on polymer binder: volumetric shrinkage |
|
DS DS/EN 12617- 3 |
Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of early age linear shrinkage for structural bonding agents |
|
DS DS/EN 12617- 4 |
Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion |
|
DS DS/EN 12618- 1 |
Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Adhesion and elongation capacity of injection products with limited ductility |
|
DS DS/EN 12618- 2 |
Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with or without thermal cycling - Adhesion by tensile bond strength |
|
DS DS/EN 12618- 3 |
Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method |
|
DS DS/EN 12620 |
Aggregates for concrete |
|
DS DS/EN 12620/AC |
Aggregates for concrete |
|
DS DS/EN 12629- 1 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements |
|
DS DS/EN 12629- 2 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines |
|
DS DS/EN 12629- 3 |
Machines for the manufacture of constructional products from concrete and calium-silicate - Safety - Part 3: Slide and turntable machines |
|
DS DS/EN 12629- 4 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4: Concrete roof tile making machines |
|
DS DS/EN 12629-5- 1 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis |
|
DS DS/EN 12629-5- 2 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis |
|
DS DS/EN 12629-5- 3 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines |
|
DS DS/EN 12629-5- 4 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines |
|
DS DS/EN 12629- 6 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products |
|
DS DS/EN 12629- 7 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products |
|
DS DS/EN 12629- 8 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete) |
|
DS DS/EN 12635 |
Industrial, commercial and garage doors and gates - Installation and use |
|
DS DS/EN 12636 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion concrete to concrete |
|
DS DS/EN 12637- 1 |
Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 1: Compatibility with concrete |
|
DS DS/EN 12637- 3 |
Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 3: Effect of injection products on elastomers |
|
DS DS/EN 1264- 1 |
Floor heating - Systems and components - Part 1: Definitions and symbols |
|
DS DS/EN 1264- 2 |
Floor heating - Systems and components - Part 2: Determination of the thermal output |
|
DS DS/EN 1264- 3 |
Floor heating - Systems and components - Part 3: Dimensioning |
|
DS DS/EN 1264- 4 |
Floor heating - Systems and components - Part 4: Installation |
|
DS DS/EN 12664 |
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance |
|
DS DS/EN 12665 |
Light and lighting - Basic terms and criteria for specifying lighting requirements |
|
DS DS/EN 12667 |
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance |
|
DS DS/EN 12670 |
Natural stone - Terminology |
|
DS DS/EN 12691 |
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to impact |
|
DS DS/EN 12706 |
Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determination of flow characteristics |
|
DS DS/EN 12729 |
Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A |
|
DS DS/EN 12730 |
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to static loading |
|
DS DS/EN 12758 |
Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties |
|
DS DS/EN 12763 |
Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery |
|
DS DS/EN 12764 |
Sanitary appliances Specification for whirlpool baths |
|
DS DS/EN 12781 |
Wall coverings - Specification for cork panels |
|
DS DS/EN 1279- 1 |
Glass in building - Insulating glass units - Part 1: Generalities, dimensional tolerances and rules for the system description |
|
DS DS/EN 12792 |
Ventilation for buildings - Symbols, terminology and graphical symbols |
|
DS DS/EN 1279- 2 |
Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration |
|
DS DS/EN 1279- 3 |
Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances |
|
DS DS/EN 12794 |
Precast concrete products Foundation piles |
|
DS DS/EN 1279- 4 |
Glass in building - Insulating glass units - Part 4: Methods of test for the physical attributes of edge seals |
|
DS DS/EN 1279- 5 |
Glass in building Insulating glass units Part 5: Evaluation of conformity |
|
DS DS/EN 1279- 6 |
Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests |
|
DS DS/EN 12808- 1 |
Adhesives and grouts for tiles - Part 1: Determination of chemical resistance of reaction resin mortars |
|
DS DS/EN 12808- 2 |
Grouts for tiles - Part 2: Determination of resistance to abrasion |
|
DS DS/EN 12808- 3 |
Grouts for tiles - Part 3: Determination of flexural and compressive strength |
|
DS DS/EN 12808- 4 |
Grouts for tiles - Part 4: Determination of shrinkage |
|
DS DS/EN 12808- 5 |
Grouts for tiles - Part 5: Determination of water absorption |
|
DS DS/EN 12809 |
Residental independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods |
|
DS DS/EN 12809/A1 |
Residental independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods-(AMENDS DS/EN 12809) |
|
DS DS/EN 12809/AC |
Residental independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods |
|
DS DS/EN 12810- 1 |
Facade scaffolds made of prefabricated components - Part 1: Product specifications |
|
DS DS/EN 12810- 2 |
Facade scaffolds made of prefabricated components - Part 2: Particular methods of structural design |
|
DS DS/EN 12811- 1 |
Temporary works equipment - Part 1: Scaffolds - Performance requirements and general design |
|
DS DS/EN 12811- 2 |
Temporary works equipment - Part 2: Information on materials |
|
DS DS/EN 12811- 3 |
Temporary works equipment - Part 3: Load testing |
|
DS DS/EN 12812 |
Falsework - Performance requirements and general design |
|
DS DS/EN 12813 |
Temporary works equipment - Load bearing towers of prefabricated components - Particular methods of structural design |
|
DS DS/EN 12825 |
Raised access floors |
|
DS DS/EN 12828 |
Heating systems in buildings - Design for water-based heating systems |
|
DS DS/EN 12831 |
Heating systems in buildings - Method for calculation of the design heat load |
|
DS DS/EN 12833 |
Skylight and conservatory roller shutters - Resistance to snow load - Test method |
|
DS DS/EN 12835 |
Airtight shutters - Air permeability test |