|
DS DS 2056 |
Fastness to light of writing materials - Requirements and rules for testing |
|
DS DS 2057 |
Fastness to light of writing materials - Preparation of test samples |
|
DS DS 2058 |
Inks for permanent black writings |
|
DS DS 2060.1 |
Testing of prints and inks for printing trade - Preparation of standard printing proofs |
|
DS DS 2060.10 |
Testing of prints and inks for printing trade - Wax resistance |
|
DS DS 2060.11 |
Testing of prints and inks for printing trade - Spice resistance |
|
DS DS 2060.12 |
Testing of prints and inks for printing trade - European colour-scale for letterpress |
|
DS DS 2060.13 |
Testing of prints and inks for printing trade - European colour-scale for offset |
|
DS DS 2060.2 |
Testing of prints and inks for printing trade - Determination of light fastness |
|
DS DS 2060.3 |
Testing of prints and inks for printing trade - Water resistance |
|
DS DS 2060.4 |
Testing of prints and inks for printing trade - Solvent resistance |
|
DS DS 2060.5 |
Testing of prints and inks for printing trade - Alkali resistance |
|
DS DS 2060.7 |
Testing of prints and inks for printing trade - Detergent resistance |
|
DS DS 2060.8 |
Testing of prints and inks for printing - Cheese resistance |
|
DS DS 2060.9 |
Testing of prints and inks for printing trade - Edible oil and fat resistance |
|
DS DS 2064.4 |
Testing of paints and paint coatings. Drying time by degrees of drying |
|
DS DS/EN 1062- 1 |
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 1: Classification |
|
DS DS/EN 1062- 11 |
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 11: Methods of conditioning before testing |
|
DS DS/EN 1062- 3 |
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination and classification of liquid-water transmission rate (permeability) |
|
DS DS/EN 1062- 6 |
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 6: Determination of carbon dioxide permeability |
|
DS DS/EN 1062- 7 |
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties |
|
DS DS/EN 12206- 1 |
Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder |
|
DS DS/EN 12215 |
Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements |
|
DS DS/EN 12757- 1 |
Mixing machinery for coating materials Safety requirements Part 1: Mixing machinery for use in vehicle refinishing |
|
DS DS/EN 12878 |
Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test |
|
DS DS/EN 12981 |
Coating plants Spray booths for application of organic powder coating material Safety requirements |
|
DS DS/EN 13300 |
Paints and varnishes - Water-borne coating materials and coating systems for interior walls and ceilings - Classification |
|
DS DS/EN 13355 |
Coating plants Combined booths Safety requirements |
|
DS DS/EN 13438 |
Paints and varnishes Powder organic coatings for galvanized or sherardised steel products for construction purposes |
|
DS DS/EN 13523- 0 |
Coil coated metals - Test methods - Part 0: General introduction and list of test methods |
|
DS DS/EN 13523- 1 |
Coil coated metals - Test methods - Part 1: Coating thickness |
|
DS DS/EN 13523- 10 |
Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV light and water condensation |
|
DS DS/EN 13523- 11 |
Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test) |
|
DS DS/EN 13523- 12 |
Coil coated metals - Test methods - Part 12: Resistance to scratching |
|
DS DS/EN 13523- 13 |
Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat |
|
DS DS/EN 13523- 14 |
Coil coated metals - Test methods - Part 14: Chalking (Helmen method) |
|
DS DS/EN 13523- 15 |
Coil coated metals - Test methods - Part 15: Metamerism |
|
DS DS/EN 13523- 16 |
Coil coated metals - Test methods - Part 16: Resistance to abrasion |
|
DS DS/EN 13523- 17 |
Coil coated metals - Test methods - Part 17: Adhesion of strippable films |
|
DS DS/EN 13523- 18 |
Coil coated metals - Test methods - Part 18: Resistance to staining |
|
DS DS/EN 13523- 19 |
Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing |
|
DS DS/EN 13523- 2 |
Coil coated metals - Test methods - Part 2: Specular gloss |
|
DS DS/EN 13523- 20 |
Coil coated metals - Test methods - Part 20: Foam adhesion |
|
DS DS/EN 13523- 21 |
Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels |
|
DS DS/EN 13523- 22 |
Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison |
|
DS DS/EN 13523- 23 |
Coil coated metals - Test methods - Part 23: Colour stability in humid atmospheres containing sulfur dioxide |
|
DS DS/EN 13523- 3 |
Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison |
|
DS DS/EN 13523- 4 |
Coil coated metals - Test methods - Part 4: Pencil hardness |
|
DS DS/EN 13523- 5 |
Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test) |
|
DS DS/EN 13523- 6 |
Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test) |
|
DS DS/EN 13523- 7 |
Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test) |
|
DS DS/EN 13523- 8 |
Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) |
|
DS DS/EN 13523- 9 |
Coil coated metals - Test methods - Part 9: Resistance to water immersion |
|
DS DS/EN 13966- 1 |
Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials - Part 1: Flat panels |
|
DS DS/EN 14462 |
Surface treatment equipment Noise test code for surface treatment equipment including its ancillary handling equipment Accuracy grades 2 and 3 |
|
DS DS/EN 1953 |
Atomising and spraying equipment for coating materials - Safety requirements |
|
DS DS/EN 21227- 1 |
Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 1: General guidance |
|
DS DS/EN 23270 |
Paints and varnishes and their raw materials - Temperatures and humidities for conditioning and testing |
|
DS DS/EN 29117 |
Paints and varnishes - Determination of through-dry state and through-dry time - Method of test |
|
DS DS/EN 456 |
Paints, varnishes and related products - Determination of flashpoint - Rapid equilibrium method |
|
DS DS/EN 50050 |
Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment |
|
DS DS/EN 50053- 1 |
Requirements for the selection, installation and use of electrostatic spraying equipment for flammable materials - Part 1: Hand-held electrostatic paint spray guns with an energy limit of 0,24 mJ and their associated apparatus |
|
DS DS/EN 50053- 2 |
Requirements for the selection, installation and use of electrostatic spraying equipment for flammable materials - Part 2: Hand-held electrostatic powder spray guns with an energy limit of 5 mJ and their associated apparatus |
|
DS DS/EN 50053- 3 |
Requirements for the selection, installation and use of electrostatic spraying equipment for flammable materials - Part 3: Hand-held electrostatic flock spray guns with an energy limit of 0,24 mJ or 5 mJ and their associated apparatus |
|
DS DS/EN 50059 |
Specification for electrostatic hand-held spraying equipment for non- flammable material for painting and finishing |
|
DS DS/EN 50144-2- 7 |
Safety of hand-held electric motor operated tools - Part 2-7: Particular requirements for spray guns |
|
DS DS/EN 50144-2- 7/CORR. |
Safety of hand-held electric motor operated tools - Part 2-7: Particular requirements for spray guns |
|
DS DS/EN 50176 |
Automatic electrostatic spraying installations for flammable liquid spraying material |
|
DS DS/EN 50177 |
Automatic electrostatic spraying installations for flammable coating powder |
|
DS DS/EN 50223 |
Automatic electrostatic application equipment for flammable flock material |
|
DS DS/EN 50348 |
Automatic electrostatic spraying equipment for non-flammable liquid spraying material |
|
DS DS/EN 927- 1 |
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 1: Classification and selection |
|
DS DS/EN 927- 3 |
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test |
|
DS DS/EN 927- 3/AC |
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test |
|
DS DS/EN 927- 4 |
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 4: Assessment of the water-vapour permeability |
|
DS DS/EN 927- 5 |
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 5: Assessment of the liquid vapour permeability |
|
DS DS/EN 971- 1 |
Paints and varnishes - Terms and definitions for coating materials - Part 1: General terms |
|
DS DS/EN ISO 11341 |
Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation |
|
DS DS/EN ISO 11507 |
Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV and water |
|
DS DS/EN ISO 11668 |
Binders for paints and varnishes - Chlorinated polymerization resins - General methods of test |
|
DS DS/EN ISO 11890- 1 |
Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method |
|
DS DS/EN ISO 11890- 2 |
Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method |
|
DS DS/EN ISO 11908 |
Binders for paints and varnishes - Amino resins - General methods of test |
|
DS DS/EN ISO 11909 |
Binders for paints and varnishes - Polyisocyanate resins - General methods of test |
|
DS DS/EN ISO 11998 |
Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings |
|
DS DS/EN ISO 12944- 1 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction |
|
DS DS/EN ISO 12944- 2 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environments |
|
DS DS/EN ISO 12944- 3 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations |
|
DS DS/EN ISO 12944- 5 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems |
|
DS DS/EN ISO 12944- 6 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods |
|
DS DS/EN ISO 12944- 7 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 7: Execution and supervision of paint work |
|
DS DS/EN ISO 12944- 8 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance |
|
DS DS/EN ISO 13803 |
Paints and varnishes - Determination of reflection haze on paint films at 20ø |
|
DS DS/EN ISO 1513 |
Paints and varnishes - Examination and preparation of samples for testing |
|
DS DS/EN ISO 1514 |
Paints and varnishes - Standard panels for testing |
|
DS DS/EN ISO 1516 |
Determination of flash/no flash - Closed cup equilibrium method |
|
DS DS/EN ISO 1517 |
Paints and varnishes - Surface-drying test - Ballotini method |
|
DS DS/EN ISO 1518 |
Paints and varnishes - Scratch test |
|
DS DS/EN ISO 15181- 1 |
Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 1: General method for extraction of biocides |
|
DS DS/EN ISO 15181- 2 |
Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate |
|
DS DS/EN ISO 1519 |
Paints and varnishes - Bend test (cylindrical mandrel) |
|
DS DS/EN ISO 1520 |
Paints and varnishes - Cupping test |
|
DS DS/EN ISO 1522 |
Paints and varnishes - Pendulum damping test |
|
DS DS/EN ISO 1523 |
Determination of flash point - Closed cup equilibrium method |
|
DS DS/EN ISO 1524 |
Paints, varnishes and printing inks - Determination of fineness of grind |
|
DS DS/EN ISO 15528 |
Paints, varnishes and raw materials for paints and varnishes - Sampling |
|
DS DS/EN ISO 15880 |
Paints, varnishes and binders - Determination of MEQ value of water-based coating materials and binders |
|
DS DS/EN ISO 16805 |
Binders for paints and varnishes Determination of glass transition temperature |
|
DS DS/EN ISO 17895 |
Paints and varnishes Determination of the volatile organic compound content of low-VOC emulsion paints |
|
DS DS/EN ISO 2114 |
Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value-Corrigendum:10/21/2005 |
|
DS DS/EN ISO 2409 |
Paints and varnishes - Cross-cut test |
|
DS DS/EN ISO 2431 |
Paints and varnishes - Determination of flow time by use of flow cups |
|
DS DS/EN ISO 2431/CORR.2 |
Paints and varnishes - Determination of flow time by use of flow cups |
|
DS DS/EN ISO 2495 |
Iron blue pigments - Specifications and methods of test |
|
DS DS/EN ISO 2808 |
Paints and varnishes - Determination of film thickness |
|
DS DS/EN ISO 2810 |
Paints and varnishes - Natural weathering of coatings - Exposure and assessment |
|
DS DS/EN ISO 2811- 1 |
Paints and varnishes - Determination of density - Part 1: Pyknometer method |
|
DS DS/EN ISO 2811- 2 |
Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method |
|
DS DS/EN ISO 2811- 3 |
Paints and varnishes - Determination of density - Part 3: Oscillation method |
|
DS DS/EN ISO 2811- 4 |
Paints and varnishes - Determination of density - Part 4: Pressure cup method |
|
DS DS/EN ISO 2812- 1 |
Paints and varnishes - Determination of resistance to liquids - Part 1: General methods |
|
DS DS/EN ISO 2812- 2 |
Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method |
|
DS DS/EN ISO 2813 |
Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20ø, 60ø and 85ø |
|
DS DS/EN ISO 2815 |
Paints and varnishes - Buchholz indentation test |
|
DS DS/EN ISO 3231 |
Paints and varnishes - Determination of resistance to humid atmospheres containing sulphur dioxide |
|
DS DS/EN ISO 3248 |
Paints and varnishes - Determination of the effect of heat |
|
DS DS/EN ISO 3251 |
Paints, varnishes and plastics - Determination of non-volatile-matter content |
|
DS DS/EN ISO 3262- 1 |
Extenders for paints - Specifications and methods of test - Part 1: Introduction and general test methods |
|
DS DS/EN ISO 3262- 10 |
Extenders for paints - Specifications and methods of test - Part 10: Natural talc/chlorite in lamellar form |
|
DS DS/EN ISO 3262- 11 |
Extenders for paints - Specifications and methods of test - Part 11: Natural talc, in lamellar form, containing carbonates |
|
DS DS/EN ISO 3262- 12 |
Extenders for paints - Specifications and methods of test - Part 12: Muscovite-type mica |
|
DS DS/EN ISO 3262- 13 |
Extenders for paints - Specifications and methods of test - Part 13: Natural quartz (ground) |
|
DS DS/EN ISO 3262- 14 |
Extenders for paints - Specifications and methods of test - Part 14: Cristobalite |
|
DS DS/EN ISO 3262- 15 |
Extenders for paints - Specifications and methods of test - Part 15: Vitreous silica |
|
DS DS/EN ISO 3262- 16 |
Extenders for paints - Specifications and methods of test - Part 16: Aluminium hydroxides |
|
DS DS/EN ISO 3262- 17 |
Extenders for paints - Specifications and methods of test - Part 17: Precipitated calcium silicate |
|
DS DS/EN ISO 3262- 18 |
Extenders for paints - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate |
|
DS DS/EN ISO 3262- 19 |
Extenders for paints - Specifications and methods of test - Part 19: Precipitated silica |
|
DS DS/EN ISO 3262- 2 |
Extenders for paints - Specifications and methods of test - Part 2: Baryte (natural Barium sulphate) |
|
DS DS/EN ISO 3262- 20 |
Extenders for paints - Specifications and methods of test - Part 20: Fumed silica |
|
DS DS/EN ISO 3262- 21 |
Extenders for paints - Specifications and methods of test - Part 21: Silica sand (unground natural quartz) |
|
DS DS/EN ISO 3262- 22 |
Extenders for paints - Specifications and methods of test - Part 22: Flux- calcined kieselguhr |
|
DS DS/EN ISO 3262- 3 |
Extenders for paints - Specifications and methods of test - Part 3: Blanc fixe |
|
DS DS/EN ISO 3262- 4 |
Extenders for paints - Specifications and methods of test - Part 4: Whiting |
|
DS DS/EN ISO 3262- 5 |
Extenders for paints - Specifications and methods of test - Part 5: Natural crystalline calcium carbonate |
|
DS DS/EN ISO 3262- 6 |
Extenders for paints - Specifications and methods of test - Part 6: Precipitated calcium carbonate |
|
DS DS/EN ISO 3262- 7 |
Extenders for paints - Specifications and methods of test - Part 7: Dolomite |
|
DS DS/EN ISO 3262- 8 |
Extenders for paints - Specifications and methods of test - Part 8: Natural clay |
|
DS DS/EN ISO 3262- 9 |
Extenders for paints - Specifications and methods of test - Part 9: Calcined clay |
|
DS DS/EN ISO 3549 |
Zinc dust pigments for paints - Specifications and test methods |
|
DS DS/EN ISO 3668 |
Paints and varnishes - Visual comparison of the colour of paints |
|
DS DS/EN ISO 3678 |
Paints and varnishes - Print-free test |
|
DS DS/EN ISO 3679 |
Determination of flash point - Rapid equilibrium closed cup method |
|
DS DS/EN ISO 3680 |
Determination of flash/no flash - Rapid equilibrium closed cup method |
|
DS DS/EN ISO 3681 |
Binders for paints and varnishes - Determination of saponification value - Titrimetric method |
|
DS DS/EN ISO 4617 |
Paints and varnishes - List of equivalent terms |
|
DS DS/EN ISO 4618- 2 |
Paints and varnishes - Terms and definitions for coating materials - Part 2: Special terms relating to paint characteristics and properties |
|
DS DS/EN ISO 4618- 3 |
Paints and varnishes - Terms and definitions for coating materials - Part 3: Surface preparation and methods of application |
|
DS DS/EN ISO 4622 |
Paints and varnishes - Pressure test for stackability |
|
DS DS/EN ISO 4623- 1 |
Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrates |
|
DS DS/EN ISO 4623- 2 |
Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates |
|
DS DS/EN ISO 4624 |
Paints and varnishes - Pull-off test for adhesion |
|
DS DS/EN ISO 4628- 1 |
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system |
|
DS DS/EN ISO 4628- 10 |
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of filiform corrosion |
|
DS DS/EN ISO 4628- 2 |
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering |
|
DS DS/EN ISO 4628- 3 |
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting |
|
DS DS/EN ISO 4628- 4 |
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking |
|
DS DS/EN ISO 4628- 5 |
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking |
|
DS DS/EN ISO 4628- 6 |
Paints and varnishes - Evaluation of degradation of paint coatings - Designation of intensity, quantity and size of common types of defect - Part 6: Rating of degree of chalking by tape method |
|
DS DS/EN ISO 4628- 7 |
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method |
|
DS DS/EN ISO 4628- 8 |
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 8: Assessment of degree of delamination and corrosion around a scribe |
|
DS DS/EN ISO 4629 |
Binders for paints and varnishes - Determination of hydroxyl value - Titrimetric method |
|
DS DS/EN ISO 591- 1 |
Titanium dioxide pigments for paints - Part 1: Specifications and methods of test |
|
DS DS/EN ISO 6270- 1 |
Paints and varnishes - Determination of resistance to humidity - Part 1: Continuous condensation |
|
DS DS/EN ISO 6270- 2 |
Paints and varnishes Determination of resistance to humidity Part 2: Procedure for exposing test specimens in condensation-water atmospheres |
|
DS DS/EN ISO 6272 |
Paints and varnishes - Falling-weight test |
|
DS DS/EN ISO 6272- 1 |
Paints and varnishes Rapid-deformation (impact resistance) tests Part 1: Falling-weight test, large area indenter |
|
DS DS/EN ISO 6477- 4 |
Binders for paints and varnishes - Alkyd resins - Part 4: Determination of fatty acid content |
|
DS DS/EN ISO 6744- 1 |
Binders for paints and varnishes - Alkyd resins - Part 1: General methods of test |
|
DS DS/EN ISO 6744- 2 |
Binders for paints and varnishes - Alkyd resins - Part 2: Determination of phthalic anhydride content |
|
DS DS/EN ISO 6744- 3 |
Binders for paints and varnishes - Alkyd resins - Part 3: Determination of unsaponifiable matter content |
|
DS DS/EN ISO 6860 |
Paints and varnishes - Bend test (conical mandrel) |
|
DS DS/EN ISO 7142 |
Binderes for paints and varnishes - Epoxy resins - General methods of test |
|
DS DS/EN ISO 7143 |
Paints, varnishes and binders - Methods of test for characterizing water-based coating materials and binders |
|
DS DS/EN ISO 7253 |
Paints and varnishes - Determination of resistance to neutral salt spray (fog) |
|
DS DS/EN ISO 7579 |
Dyestuffs - Determination of solubility in organic solvents - Gravimetric method |
|
DS DS/EN ISO 7783- 1 |
Paints and varnishes - Determination of water-vapour transmission rate - Part 1: Dish method for free films |
|
DS DS/EN ISO 7783- 2 |
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 2: Determination and classification of water-vapour transmission rate |
|
DS DS/EN ISO 787- 10 |
General methods of test for pigments and extenders - Part 10: Determination of density - Pycnometer method |
|
DS DS/EN ISO 787- 11 |
General methods of test for pigments and extenders - Part 11: Determination of tamped volume and apparent density after tamping |
|
DS DS/EN ISO 787- 13 |
General methods of test for pigments and extenders - Part 13: Determination of water-soluble sulfates, chlorides and nitrates |
|
DS DS/EN ISO 787- 14 |
General methods of test for pigments and extenders - Part 14: Determination of resistivity of aqueous extract |
|
DS DS/EN ISO 787- 15 |
General methods of test for pigments and extenders - Part 15: Comparison of resistance to light of coloured pigments of similar types |
|
DS DS/EN ISO 787- 16 |
General methods of test for pigments and extenders - Part 16: Determination of relative tinting strength (or equivalent colouring value) and colour on reduction of coloured pigments - Visual comparison method |
|
DS DS/EN ISO 787- 18 |
General methods of test for pigments and extenders - Part 18: Determination of residue on sieve - Mechanical flushing procedure |
|
DS DS/EN ISO 787- 19 |
General methods of test for pigments - Part 19: Determination of water- soluble nitrates (Salicylic acid method) |
|
DS DS/EN ISO 787- 2 |
General methods of test for pigments and extenders - Part 2: Determination of matter volatile at 105 øC |
|
DS DS/EN ISO 787- 23 |
General methods of test for pigments and extenders - Part 23: Determination of density (using a centrifuge to remove entrained air) |
|
DS DS/EN ISO 787- 24 |
General methods of test for pigments and extenders - Part 24: Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments - Photometric methods |
|
DS DS/EN ISO 787- 3 |
General methods of test for pigments and extenders - Part 3: Determination of matter soluble in water - Hot extraction method |
|
DS DS/EN ISO 787- 5 |
General methods of test for pigments and extenders - Part 5: Determination of oil absorption value |
|
DS DS/EN ISO 787- 8 |
General methods of test for pigments and extenders - Part 8: Determination of matter soluble in water - Cold extraction method |
|
DS DS/EN ISO 787- 9 |
General methods of test for pigments and extenders - Part 9: Determination of pH value of an aqueous suspension |
|
DS DS/EN ISO 8028 |
Rubber and/or plastics hoses and assemblies for airless paint spraying - Specification |
|
DS DS/EN ISO 8130- 14 |
Coating powders - Part 14: Terminology |
|
DS DS/EN ISO 8130- 9 |
Coating powders - Part 9: Sampling |
|
DS DS/EN ISO 8780- 1 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 1: Introduction |
|
DS DS/EN ISO 8780- 2 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 2: Dispersion using an oscillatory shaking machine |
|
DS DS/EN ISO 8780- 3 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 3: Dispersion using a high-speed impeller mill |
|
DS DS/EN ISO 8780- 4 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 4: Dispersion using a bead mill |
|
DS DS/EN ISO 8780- 5 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 5: Dispersion using an automatic muller |
|
DS DS/EN ISO 8780- 6 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - part 6: Dispersion using a triple-roll-mill |
|
DS DS/EN ISO 8781- 1 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 1: Assessment from the change in tinting strength of coloured pigments |
|
DS DS/EN ISO 8781- 2 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 2: Assessment from the change in fineness of grind |
|
DS DS/EN ISO 8781- 3 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 3: Assessment from the change in gloss |
|
DS DS/EN ISO 9020 |
Binders for paints and varnishes - Determination of free-formaldehyde content of amino resins - Sodium sulfite titrimetric method |
|
DS DS/EN ISO 9038 |
Test for sustained combustibility of liquids |
|
DS DS/EN ISO 9514 |
Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing |
|
DS DS/ENV 12837 |
Paints and varnishes - Qualification of inspectors for corrosion protection of steel structures by protective paint systems |
|
DS DS/ENV 927- 2 |
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2: Performance specification |
|
DS DS/ISO 11997- 2 |
Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog) dry/humidity/UV light |
|
DS DS/ISO 14680- 1 |
Paints and varnishes - Determination of pigment content - Part 1: Centrifuge method |
|
DS DS/ISO 14680- 2 |
Paints and varnishes - Determination of pigment content - Part 2: Ashing method. |
|
DS DS/ISO 14680- 3 |
Paints and varnishes - Determination of pigment content. Part 3: Filtration method |
|
DS DS/ISO 15710 |
Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution |
|
DS DS/ISO 20340 |
Paints and varnishes - Performance requirements for protective paint systems for offshore and related structures |
|
DS DS/ISO 2814 |
Paints and varnishes - Comparison of contrast ratio (hiding power) of paints of the same type and colour |
|
DS DS/ISO 2884- 1 |
Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear |
|
DS DS/ISO 3233+COR.1 |
Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the density of a dried coating |
|
DS DS/ISO 3270 |
Paints and varnishes and their raw materials - Temperatures and humidities for conditioning and testing |
|
DS DS/ISO 3856/1 |
Paints and varnishes - Determination of "soluble" metal content - Part 1: Determination of lead content - Flame atomic absorption spectroscopic method and dithizione spectrophotometric method |
|
DS DS/ISO 3856/2 |
Paints and varnishes - Determination of "soluble" metal content - Part 2: Determination of antimony content - Flameatomic absorption spectroscopic method and rhodamine B spectrophotometric method |
|
DS DS/ISO 3856/3 |
Paints and varnishes - Determination of "soluble" metal content - Part 3: Determination of barium content - Flame atomic emission spectroscopic method |
|
DS DS/ISO 3856/4 |
Paints and varnishes - Determination of "soluble" metal content - Part 4: Determination of cadmium content - Flame atomic absorption spectroscopic method and polarographic method |
|
DS DS/ISO 3856/5 |
Paints and varnishes - Determination of "soluble" metal content - Part 5: Determination of hexavalent chromium content of the pigment and extender portion of the paint - Diphenylcarbazide spectrophotometric method |
|
DS DS/ISO 3856/6 |
Paints and varnishes - Determination of "soluble" metal content - Part 6: Determination of the total chromium content of the liquid portion of the paint - Flame atomic absorption spectroscopic method |
|
DS DS/ISO 3856/7 |
Paints and varnishes - Determination of "soluble" metal content - Part 7: Determination of mercury content of the pigment portion of the paint and of the liquid portion of water-dilutable paints - Flameless atomic absorption spectrometric method |
|
DS DS/ISO 3905 |
Paints and varnishes - Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using black and white charts) |
|
DS DS/ISO 3906 |
Paints and varnishes - Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using polyester film) |
|
DS DS/ISO 4628/1 |
Paint and varnish coatings - Evaluation of defects - Part 1: General principles |
|
DS DS/ISO 4628/2 |
Paint and varnish coatings - Evaluation of defects - Part 2: Blistering |
|
DS DS/ISO 4628/3 |
Paint and varnish coatings - Evaluation of defects - Part 3: Rusting |
|
DS DS/ISO 4628/4 |
Paint and varnish coatings - Evaluation of defects - Part 4: Cracking |
|
DS DS/ISO 4628/5 |
Paint and varnish coatings - Evaluation of defects - Part 5: Flaking |
|
DS DS/ISO 6271 |
Clear liquids - Estimation of colour by the platinum-cobalt scale |
|
DS DS/ISO 6860 |
Paints and varnishes - Bend test (conical mandrel) |
|
DS DS/ISO 7724/1 |
Paints and varnishes - Colorimetry - Part 1: Principles |
|
DS DS/ISO 7724/2 |
Paints and varnishes - Colorimetry - Part 2: Colour measurement |
|
DS DS/ISO 7784- 3 |
Paints and varnishes - Determination of resistance to abrasion - Part 3: Reciprocating test panel method |