|
DS DS 912.1 |
Paper forms - Basic spacings and network. |
|
DS DS 912.1- D |
Appendix D to 912.1 |
|
DS DS 912.2 |
Paper forms - Basic details |
|
DS DS 914 |
Envelopes |
|
DS DS/EN 1010- 4 |
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines |
|
DS DS/EN 1010- 5 |
Safety of machinery Safety requirements for the design and construction of printing and paper converting machines Part 5: Machines for the production of corrugated board and machines for the conversion of flat and corrugated board |
|
DS DS/EN 1034- 1 |
Safety of machiney - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements |
|
DS DS/EN 1034- 22 |
Safety of machinery Safety requirements for the design and construction of paper making and finishing machines Part 22: Wood Grinders |
|
DS DS/EN 1034- 3 |
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Winders and slitters, plying machines |
|
DS DS/EN 1034- 7 |
Safety of machinery Safety requirements for the design and construction of paper making and finishing machines Part 7: Chests |
|
DS DS/EN 12281 |
Printing and business paper - Requirements for copy paper for dry toner imaging processes |
|
DS DS/EN 12283 |
Printing and business paper - Determination of toner adhesion |
|
DS DS/EN 1230- 1 |
Paper and board intended for contact with foodstuffs - Sensory analysis - Part 1: Odour |
|
DS DS/EN 1230- 2 |
Paper and board intended for contact with foodstuffs - Sensory analysis - Part 2: Off-flavour (taint) |
|
DS DS/EN 1230- 2/AC |
Paper and board intended for contact with foodstuffs - Sensory analysis - Part 2: Off-flavour (taint) |
|
DS DS/EN 12497 |
Paper and board Paper and board intended to come into contact with foodstuffs Determination of mercury in an aqueous extract-:1999 |
|
DS DS/EN 12498 |
Paper and board Paper and board intended to come into contact with foodstuffs Determination of cadmium and lead in an aqueous extract-:1997 |
|
DS DS/EN 12625- 3 |
Tissue paper and tissue products - Part 3: Determination of thickness and apparent bulk density |
|
DS DS/EN 12625- 4 |
Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at break and tensile energy absorption |
|
DS DS/EN 12625- 5 |
Tissue paper and tissue products - Part 5: Determination of wet tensile strength |
|
DS DS/EN 12625- 6 |
Tissue paper and tissue products - Part 6: Determination of grammage |
|
DS DS/EN 12625- 7 |
Tissue paper and tissue products - Part 7: Determination of optical properties |
|
DS DS/EN 12858 |
Paper - Printing and business paper - Requirements for continuous stationery |
|
DS DS/EN 13023 |
Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy categories 2 and 3 |
|
DS DS/EN 14086 |
Paper and board - Measurement of specular gloss - 45 gloss with a parallel beam, DIN method |
|
DS DS/EN 14719 |
Pulp, paper and board Determination of the Diisopropylnaphthalene (DIPN) content by solvent extraction |
|
DS DS/EN 1541 |
Paper and board intended to come into contact with foodstuffs - Determination of formaldehyde in an aqueous extract |
|
DS DS/EN 20187 |
Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
|
DS DS/EN 20287 |
Paper and Board - Determination of moisture content - Oven-drying method |
|
DS DS/EN 20535 |
Paper and board - Determination of water absorptiveness - Cobb method |
|
DS DS/EN 20638 |
Pulps - Determination of dry matter content |
|
DS DS/EN 21974 |
Paper - Determination of tearing resistance (Elmendorf method) |
|
DS DS/EN 23035 |
Single-faced and single wall corrugated fibreboards - Determination of flat crush resistance |
|
DS DS/EN 25264- 3 |
Pulps - Laboratory beating - Part 3: Jokro mill method |
|
DS DS/EN 25651 |
Paper, board and pulps - Units for expressing properties |
|
DS DS/EN 27213 |
Pulps - Sampling for testing |
|
DS DS/EN 643 |
Paper and board - European list of standard grades of recovered paper and board |
|
DS DS/EN 644 |
Paper - Untrimmed sizes - Primary range and supplementary range designation and tolerances, expression of direction of manufacture |
|
DS DS/EN 648 |
Paper and board intended to come into contact with foodstuffs - Determination of the fastness of fluorescent whitened paper and board |
|
DS DS/EN 920 |
Paper and board intended to come into contact with foodstuffs - Determination of dry matter content in an aqueous extract |
|
DS DS/EN ISO 12625- 3 |
Tissue paper and tissue products Part 3: Determination of thickness, bulking thickness and apparent bulk density |
|
DS DS/EN ISO 12625- 4 |
Tissue paper and tissue products Part 4: Determination of tensile strength, stretch at break and tensile energy absorption |
|
DS DS/EN ISO 12625- 5 |
Tissue paper and tissue products Part 5: Determination of wet tensile strength |
|
DS DS/EN ISO 12625- 9 |
Tissue paper and tissue products Part 9: Determination of ball burst strength |
|
DS DS/EN ISO 14453 |
Pulps - Determination of acetone-soluble matter |
|
DS DS/EN ISO 15318 |
Pulp, paper and board - Determination of 7 specified polychlorinated biphenyls (PCB) |
|
DS DS/EN ISO 15320 |
Pulp, paper and board - Determination of pentachlorophenol in an aqueous extract |
|
DS DS/EN ISO 15755 |
Paper and board - Estimation of contraries |
|
DS DS/EN ISO 186 |
Paper and board - Sampling to determine average quality (ISO 186:2002) |
|
DS DS/EN ISO 1924- 2 |
Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method |
|
DS DS/EN ISO 216 |
Writing paper and certain classes of printed matter - Trimmed sizes - A and B series |
|
DS DS/EN ISO 2758 |
Paper - Determination of bursting strength |
|
DS DS/EN ISO 2759 |
Board - Determination of bursting strength |
|
DS DS/EN ISO 3037 |
Corrugated fibreboard - Determination of edgewise crush resistance (Unwaxed edge method) |
|
DS DS/EN ISO 4119 |
Pulps - Determination of stock concentration |
|
DS DS/EN ISO 5263- 1 |
Pulps Laboratory wet disintegration Part 1: Disintegration of chemical pulps |
|
DS DS/EN ISO 5263- 2 |
Pulps Laboratory wet disintegration Part 2: Disintegration of mechanical pulps at 20 degrees C |
|
DS DS/EN ISO 5263- 3 |
Pulps Laboratory wet disintegration Part 3: Disintegration of mechanical pulps at > 85 degrees C |
|
DS DS/EN ISO 5267- 1 |
Pulps - Determination of drainability - Part 1: Schopper-Riegler method |
|
DS DS/EN ISO 5267- 1/AC |
Pulps - Determination of drainability - Part 1: Schopper-Riegler method |
|
DS DS/EN ISO 5269- 1 |
Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method |
|
DS DS/EN ISO 5269- 2 |
Pulps - Preparation of laboratory sheets for physical testing - Part 2: Rapid-K then method |
|
DS DS/EN ISO 5270 |
Pulps - Laboratory sheets - Determination of physical properties |
|
DS DS/EN ISO 534 |
Paper and board Determination of thickness, density and specific volume |
|
DS DS/EN ISO 5350- 1 |
Pulp - Estimation of dirt and shives - Part 1: Inspection of laboratory sheets |
|
DS DS/EN ISO 5350- 2 |
Pulp - Estimation of dirt and shives - Part 2: Bleached pulp |
|
DS DS/EN ISO 536 |
Paper and board - Determination of grammage |
|
DS DS/EN ISO 7263 |
Corrugating medium - Determination of the flat crush resistance after laboratory fluting |
|
DS DS/EN ISO 801- 1 |
Pulps - Determination of saleable mass in lots - Part 1: Pulp baled in sheet form |
|
DS DS/EN ISO 801- 3 |
Pulps - Determination of saleable mass in lots - Part 3: Unitized bales |
|
DS DS/EN ISO 8254- 1 |
Paper and board - Measurement of specular gloss - Part 1: 75 gloss with a converging beam, TAPPI method |
|
DS DS/EN ISO 8254- 2 |
Paper and board - Measurement of specular gloss - Part 2: 75 gloss with a parallel beam, DIN method |
|
DS DS/EN ISO 9706 |
Information and documentation - Paper for documents - Requirements for permanence |
|
DS DS/EN ISO/IEC 5264- 2 |
Pulps - Laboratory beating - Part 2: PFI mill method |
|
DS DS/ENV 12282 |
Paper - Printing and business paper - Determination of edge dust |
|
DS DS/ENV 12448 |
Paper - Printing and business paper - Determination of the coefficient of static friction |
|
DS DS/ENV 12625- 2 |
Test methods for tissue paper and tissue products - Part 2: Sampling, conditioning and determination of grammage |
|
DS DS/ENV 12625- 8 |
Tissue paper and tissue products - Part 8: Water absorption time, water absorption capacity - Manual and automated test method |
|
DS DS/ISO 12192 |
Paper and board - Compressive strength - Ring crush method |
|
DS DS/ISO 187 |
Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
|
DS DS/ISO 4046- 1 |
Paper, board, pulps and related terms - Vocabulary - Part 1: Alphabetical index |
|
DS DS/ISO 4046- 2 |
Paper, board, pulps and related terms - Vocabulary - Part 2: Pulping terminology |
|
DS DS/ISO 4046- 3 |
Paper, board, pulps and related terms - Vocabulary - Part 3: Paper- making terminology |
|
DS DS/ISO 4046- 4 |
Paper, board, pulps and related terms - Vocabulary - Part 4: Paper and board grades and converted products |
|
DS DS/ISO 4046- 5 |
Paper, board, pulps and related terms - Vocabulary - Part 5: Properties of pulp, paper and board |
|
DS DS/ISO 5651 |
Paper, board and pulps - Units for expressing properties |
|
DS DS/ISO 638 |
Pulps - Determination of dry matter content |
|
DS DS/ISO 7213 |
Pulps - Sampling for testing |
|
DS DS/ISO 9706 |
Information and documentation - Paper for documents - Requirements for permanence |