|
DS DS 1002 |
Planed coniferous timber - Cross section sizes |
|
DS DS 1111 |
Glued timber structures - Delamination test |
|
DS DS 1118 |
Glued timber structures - Glued laminated timber - Production and control |
|
DS DS 146 |
Coniferous sawn timber - Cross section sizes and lengths |
|
DS DS 2191.0 |
Measurement of noise from woodworking machines - Part 0: Guidelines |
|
DS DS 2191.1 |
Measurement of noise from woodworking machines - Part 1: Determination of sound pressure level at the operator´s and other specified positions around the machine |
|
DS DS 2191.2 |
Measurement of noise from woodworking machines - Part 2: Operating conditions for single blade circular saw benches |
|
DS DS 2191.3 |
Measurement of noise from woodworking machines - Part 3: Operating conditions for planing machines |
|
DS DS 2191.4 |
Measurement of noise from woodworking machines - Part 4: Operating conditions for thickness planing machines |
|
DS DS 2191.5 |
Measurement of noise from woodworking machines - Part 5: Operating conditions for single spindle moulding machines |
|
DS DS 2191.6 |
Measurement of noise from woodworking machines - Part 6: Operating conditions for double-end profiling machines |
|
DS DS 2191.7 |
Measurement of noise from woodworking machines - Part 7: Operating conditions for edge banding machines |
|
DS DS 2191.8 |
Measurement of noise from woodworking machines - Part 8: Operating conditions for double-end sizing and edge banding machines |
|
DS DS 2191.9 |
Measurement of noise from woodworking machines - Part 9: Operating conditions for two-side and multi-side planing and moulding machines |
|
DS DS 483 |
Visual strength grading of timber |
|
DS DS 483/TILL.1 |
Supplement No. 1 to DS 483, Visual strength grading of timber- (AMENDS DS 483) |
|
DS DS/CEN/CR 14244 |
Durability of wood and wood-based products - Recommendations for measurement of emissions to the environment from treated wood in service |
|
DS DS/CEN/TR 15046 |
Wood preservatives Artificial weathering of treated wood prior to biological testing UVradiation and water-spraying procedure |
|
DS DS/CEN/TS 13354 |
Solid wood panels - Bonding quality - Test method |
|
DS DS/CEN/TS 13810- 2 |
Wood-based panels - Floating floors - Part 2: Test methods |
|
DS DS/CEN/TS 14966 |
Wood-based panels Small scale indicative test methods for certain mechanical properties |
|
DS DS/CEN/TS 15003 |
Durability of wood and wood-based products Criteria for hot air processes for curative uses against wood destroying organisms |
|
DS DS/CEN/TS 15083- 1 |
Durability of wood and wood-based products Determination of the natural durability of solid wood against wood-destroying fungi, test methods Part 1: Basidiomycetes |
|
DS DS/CEN/TS 15083- 2 |
Durability of wood and wood-based products Determination of natural durability of solid wood against wood-destroying fungi, test methods Part 2: Soft rotting micro-fungi |
|
DS DS/EN 1001- 1 |
Durability of wood and wood-based products Terminology List of equivalent terms |
|
DS DS/EN 1001- 2 |
Durability of wood and wood based products Terminology Part 2: Vocabulary |
|
DS DS/EN 1058 |
Wood-based panels - Determination of characteristic values of mechanical properties and density |
|
DS DS/EN 1072 |
Plywood - Description of bending properties for structural plywood |
|
DS DS/EN 1084 |
Plywood - Formaldehyde release classes determined by the gas analysis method |
|
DS DS/EN 1087- 1 |
Particleboards - Determination of moisture resistance - Part 1: Boil test |
|
DS DS/EN 1128 |
Cement-bonded particleboards - Determination of hard body impact resistance |
|
DS DS/EN 1194 |
Timber structures - Glued laminated timber - Strength classes and determination of characteristic values |
|
DS DS/EN 120 |
Wood based panels - Determination of formaldehyde content - Extraction method called the perforator method |
|
DS DS/EN 12103 |
Resilient floor coverings - Agglomerated cork underlays - Specification |
|
DS DS/EN 12104 |
Resilient floor coverings - Cork floor tiles - Specification |
|
DS DS/EN 12105 |
Resilient floor coverings - Determination of moisture content of agglomerated composition cork |
|
DS DS/EN 1218- 1 |
Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table |
|
DS DS/EN 1218- 2 |
Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains |
|
DS DS/EN 1218- 3 |
Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers |
|
DS DS/EN 1218- 4 |
Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s)-Amendment 1: 11/21/2005 |
|
DS DS/EN 1218- 5 |
Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or fed by chain |
|
DS DS/EN 12246 |
Quality classification of timber used in pallets and packaging |
|
DS DS/EN 12248 |
Sawn timber used in industrial packaging - Permitted deviations and preferential sizes |
|
DS DS/EN 12249 |
Sawn timber used in pallets - Permitted deviations and guidelines for dimensions |
|
DS DS/EN 12369- 1 |
Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards |
|
DS DS/EN 12369- 2 |
Wood-based panels - Characteristic values for structural design - Part 2: Plywood |
|
DS DS/EN 12455 |
Resilient floor coverings - Specification for corkment underlay |
|
DS DS/EN 12465 |
Timber poles for overhead lines - Durability requirements |
|
DS DS/EN 12479 |
Wood poles for overhead lines - Sizes - Methods of measurement and permissible deviations |
|
DS DS/EN 12490 |
Durability of wood and wood-based products - Preservative-treated solid wood - Determination of the penetration and retention of creosote in treated wood |
|
DS DS/EN 12509 |
Timber poles for overhead lines - Test methods - Determination of modulus of elasticity, bending strength, density and moisture content |
|
DS DS/EN 12510 |
Wood poles for overhead lines - Strength grading criteria |
|
DS DS/EN 12510/AC |
Wood poles for overhead lines - Strength grading criteria |
|
DS DS/EN 12511 |
Wood poles for overhead lines - Determination of characteristic values |
|
DS DS/EN 12750 |
Safety of woodworking machines - Four-sided moulding machines |
|
DS DS/EN 12775 |
Solid wood panels - Classification and terminology |
|
DS DS/EN 12781 |
Wall coverings - Specification for cork panels |
|
DS DS/EN 12871 |
Wood-based panels - Performance specifications and requirements for load bearing boards for use in floors, walls and roofs |
|
DS DS/EN 13017- 1 |
Solid wood panels - Classification by surface appearance - Part 1: Softwood |
|
DS DS/EN 13017- 2 |
Solid wood panels - Classification by surface appearance - Part 2: Hardwood |
|
DS DS/EN 13085 |
Wallcoverings - Specification for cork rolls |
|
DS DS/EN 1309- 1 |
Round and sawn timber - Method of measurement of dimensions - Part 1: Sawn timber |
|
DS DS/EN 1310 |
Round and sawn timber - Method of measurement of features |
|
DS DS/EN 1311 |
Round and sawn timber - Method of measurement of biological degrade |
|
DS DS/EN 1312 |
Round and sawn timber - Determination of the batch volume of sawn timber |
|
DS DS/EN 1313- 1 |
Round and sawn timber - Permitted deviations and preferred sizes - Part 1: Softwood sawn timber |
|
DS DS/EN 1313- 1/A1 |
Round and sawn timber - Permitted deviations and preferred sizes - Part 1: Softwood sawn timber-(AMENDS DS/EN 1313-1) |
|
DS DS/EN 1313- 2 |
Round and sawn timber - Permitted deviations and preferred sizes - Part 2: Hardwood sawn timber |
|
DS DS/EN 1313- 2/AC |
Round and sawn timber - Permitted deviations and preferred sizes - Part 2: Hardwood sawn timber |
|
DS DS/EN 1315- 1 |
Dimensional classification - Part 1: Hardwood round timber |
|
DS DS/EN 1315- 2 |
Dimensional classification - Part 2: Softwood round timber |
|
DS DS/EN 1316- 1 |
Hardwood round timber - Qualitative classification - Part 1: Oak and beech |
|
DS DS/EN 1316- 2 |
Hardwood round timber - Qualitative classification - Part 2: Poplar |
|
DS DS/EN 1316- 3 |
Hardwood round timber - Qualitative classification - Part 3: Ash and maples and sycamore |
|
DS DS/EN 13183- 1 |
Moisture content of a piece of sawn timber - Part 1: Determination by oven dry method |
|
DS DS/EN 13183- 1/AC |
Moisture content of a piece of sawn timber - Part 1: Determination by oven dry method |
|
DS DS/EN 13183- 2 |
Moisture content of a piece of sawn timber - Part 2: Estimation by electrical resistance method |
|
DS DS/EN 13183- 2/AC |
Moisture content of a piece of sawn timber - Part 2: Estimation by electrical resistance method |
|
DS DS/EN 13183- 3 |
Moisture content of a piece of sawn timber Part 3: Estimation by capacitance method |
|
DS DS/EN 13226 |
Wood flooring - Solid parquet elements with grooves and/or tongues |
|
DS DS/EN 13227 |
Wood flooring - Solid lamparquet products |
|
DS DS/EN 13228 |
Wood flooring - Solid wood overlay flooring elements including blocks with an interlocking system |
|
DS DS/EN 1328 |
Cement bonded particleboards - Determination of frost resistance |
|
DS DS/EN 13329 |
Laminate floor coverings - Specifications, requirements and test methods |
|
DS DS/EN 13353 |
Solid wood panels (SWP) - Requirements |
|
DS DS/EN 13442 |
Wood and parquet flooring and wood panelling and cladding - Determination of the resistance to chemical agents |
|
DS DS/EN 13446 |
Wood-based panels - Determination of withdrawal capacity of fasteners |
|
DS DS/EN 13488 |
Wood flooring - Mosaic parquet elements |
|
DS DS/EN 13489 |
Wood flooring - Multi-layer parquet elements |
|
DS DS/EN 13556 |
Round and sawn timber - Nomenclature of timbers used in Europe |
|
DS DS/EN 13629 |
Wood flooring - Solid pre-assembled hardwood board |
|
DS DS/EN 13647 |
Wood and parquet flooring and wood panelling and cladding - Determination of geometrical characteristics |
|
DS DS/EN 13756 |
Wood floor - Terminology |
|
DS DS/EN 13810- 1 |
Wood-based panels - Floating floors - Part 1: Performance specifications and requirements |
|
DS DS/EN 13879 |
Wood-based panels - Determination of edgewise bending properties |
|
DS DS/EN 13986 |
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
|
DS DS/EN 13986/TILL.1 |
National Annex to EN 13986:2002-(AMENDS DS/EN 13986) |
|
DS DS/EN 13990 |
Wood flooring - Solid softwood floor boards |
|
DS DS/EN 14080 |
Timber structures Glued laminated timber Requirements |
|
DS DS/EN 14251 |
Structural round timber - Test methods |
|
DS DS/EN 14279 |
Laminated Veneer Lumber (LVL) Definitions, classification and requirements |
|
DS DS/EN 14322 |
Wood-based panels - Melamine faced boards for interior uses - Definition, requirements and classification |
|
DS DS/EN 14323 |
Wood-based panels - Melamine faced boards for interior uses - Test methods |
|
DS DS/EN 14342 |
Wood flooring Characteristics, evaluation of conformity and marking |
|
DS DS/EN 14354 |
Wood-based panels Wood veneer floor covering |
|
DS DS/EN 14374 |
Timber structures - Structural laminated veneer lumber - Requirements |
|
DS DS/EN 1438 |
Symbols for timber and wood-based products |
|
DS DS/EN 14755 |
Extruded particleboards Specifications |
|
DS DS/EN 1533 |
Wood and parquet flooring - Determination of bending properties - Test methods |
|
DS DS/EN 1534 |
Wood and parquet flooring - Determination of resistance to indentation (Brinell) - Test method |
|
DS DS/EN 1611- 1 |
Sawn timber - Appearance grading of softwoods - Part 1: European spruces, firs, pines and Douglas firs |
|
DS DS/EN 1611- 1/A1 |
Sawn timber - Appearance grading of softwoods - Part 1: European spruces, firs, pines, Douglas fir and larches-(AMENDS DS/EN 1611-1) |
|
DS DS/EN 1807 |
Safety of woodworking machines - Band sawing machines |
|
DS DS/EN 1870- 1 |
Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table) and dimension saws |
|
DS DS/EN 1870- 10 |
Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines |
|
DS DS/EN 1870- 11 |
Safety of woodworking machines - Circular sawing machines - Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) |
|
DS DS/EN 1870- 12 |
Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines |
|
DS DS/EN 1870- 2 |
Safety of woodworking machines - Circular sawing machines - Part 2: Horizontal beam panel saws and vertical panel saws |
|
DS DS/EN 1870- 2/AC |
Safety of woodworking machines - Circular sawing machines - Part 2: Horizontal beam panel saws and vertical panel saws |
|
DS DS/EN 1870- 3 |
Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches |
|
DS DS/EN 1870- 4 |
Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading |
|
DS DS/EN 1870- 5 |
Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines |
|
DS DS/EN 1870- 6 |
Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading |
|
DS DS/EN 1870- 7 |
Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manuel loading and/or unloading |
|
DS DS/EN 1870- 8 |
Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading |
|
DS DS/EN 1870- 9 |
Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading |
|
DS DS/EN 1910 |
Wood and parquet flooring and wood panelling and cladding - Determination of dimensional stability |
|
DS DS/EN 1912 |
Structural timber - Strength classes - Assignment of visual grades and species |
|
DS DS/EN 300 |
Oriented Strand Boards (OSB) - Definitions, classification and specifications |
|
DS DS/EN 309 |
Particleboards Definition and classification |
|
DS DS/EN 310 |
Wood-based panels - Determination of modulus of elasticity in bending and bending strength |
|
DS DS/EN 311 |
Wood-based panels - Surface soundness - Test method |
|
DS DS/EN 312 |
Particleboards - Specifications |
|
DS DS/EN 313- 1 |
Plywood - Classification and terminology - Part 1: Classification |
|
DS DS/EN 313- 2 |
Plywood - Classification and terminology - Part 2: Terminology |
|
DS DS/EN 314- 1 |
Plywood Bonding quality Part 1: Test methods |
|
DS DS/EN 314- 2 |
Plywood - Bonding quality - Part 2: Requirements |
|
DS DS/EN 315 |
Plywood - Tolerances for dimensions |
|
DS DS/EN 316 |
Wood fibreboards - Definition, classification and symbols |
|
DS DS/EN 317 |
Particleboards and fibreboards - Determination of swelling in thickness after immersion in water |
|
DS DS/EN 318 |
Wood based panels - Determination of dimensional changes associated with changes in relative humidity |
|
DS DS/EN 319 |
Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board |
|
DS DS/EN 320 |
Fibreboards - Determination of resistance to axial withdrawal of screws |
|
DS DS/EN 321 |
Wood-based panels - Determination of moisture resistance under cyclic test conditions |
|
DS DS/EN 322 |
Wood-based panels - Determination of moisture content |
|
DS DS/EN 323 |
Wood-based panels - Determination of density |
|
DS DS/EN 324- 1 |
Wood based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length |
|
DS DS/EN 324- 2 |
Wood-based panels - Determination of dimensions of boards - Part 2: Determination of squareness and edge straightness |
|
DS DS/EN 325 |
Wood-based panels - Determination of dimensions of test pieces |
|
DS DS/EN 326- 1 |
Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
|
DS DS/EN 326- 2 |
Wood based panels - Sampling, cutting and inspection - Part 2: Quality control in the factory |
|
DS DS/EN 326- 3 |
Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
|
DS DS/EN 335- 2 |
Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 2: Application to solid wood |
|
DS DS/EN 335- 3 |
Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels |
|
DS DS/EN 336 |
Structural timber - Sizes, permitted deviations |
|
DS DS/EN 338 |
Structural timber - Strength classes |
|
DS DS/EN 350- 1 |
Durability of wood and wood-based products - Natural durability of solid wood - Part 1: Guide to the principles of testing and classification of the natural durability of wood |
|
DS DS/EN 350- 2 |
Durability of wood and wood-based products - Natural durability of solid wood - Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe |
|
DS DS/EN 351- 1 |
Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention |
|
DS DS/EN 351- 2 |
Durability of wood and wood-based products - Preservative-treated solid wood - Part 2: Guidance on sampling for the analysis of preservative-treated wood |
|
DS DS/EN 382- 1 |
Fibreboards - Determination of surface absorption - Part 1: Test method for dry process fibreboards |
|
DS DS/EN 382- 2 |
Fibreboards - Determination of surface absorption - Part 2: Test methods for hardboards |
|
DS DS/EN 384 |
Structural timber - Determination of characteristic values of mechanical properties and density |
|
DS DS/EN 385 |
Finger jointed structural timber - Performance requirements and minimum production requirements |
|
DS DS/EN 386 |
Glued laminated timber - Performance requirements and minimum production requirements |
|
DS DS/EN 387 |
Glued laminated timber - Large finger joints - Performance requirements and minimum production requirements |
|
DS DS/EN 390 |
Glued laminated timber - Sizes - Permissible deviations |
|
DS DS/EN 391 |
Glued laminated timber - Delamination test of glue lines |
|
DS DS/EN 392 |
Glued laminated timber - Shear test of glue lines |
|
DS DS/EN 408 |
Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties |
|
DS DS/EN 460 |
Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes |
|
DS DS/EN 50144-2- 14 |
Safety of hand-held electric motor operated tools - Part 2-14: Particular requirements for planers |
|
DS DS/EN 518 |
Structural timber - Grading - Requirements for visual strength grading standards |
|
DS DS/EN 519 |
Structural timber - Grading - Requirements for machine strength graded timber and grading machines |
|
DS DS/EN 622- 1 |
Fibreboards - Specifications - Part 1: General requirements |
|
DS DS/EN 622- 2 |
Fibreboards - Specifications - Part 2: Requirements for hardboards |
|
DS DS/EN 622- 3 |
Fibreboards - Specifications - Part 3: Requirements for medium boards |
|
DS DS/EN 622- 4 |
Fibreboards - Specifications - Part 4: Requirements for softboards |
|
DS DS/EN 622- 5 |
Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) |
|
DS DS/EN 633 |
Cement-bonded particleboards - Definition and classification |
|
DS DS/EN 634- 1 |
Cement-bonded particleboards - Specification - Part 1: General requirements |
|
DS DS/EN 634- 2 |
Cement-bonded particleboards - Specifications - Part 2: Requirements for OPC bonded particleboards for use in dry, humid and exterior conditions |
|
DS DS/EN 635- 1 |
Plywood - Classification by surface appearance - Part 1: General |
|
DS DS/EN 635- 2 |
Plywood - Classification by surface appearance - Part 2: Hardwood |
|
DS DS/EN 635- 3 |
Plywood - Classification by surface appearance - Part 3: Softwood |
|
DS DS/EN 635- 5 |
Plywood - Classification by surface appearance - Part 5: Methods for measuring and expressing characteristics and defects |
|
DS DS/EN 636 |
Plywood - Specifications |
|
DS DS/EN 717- 2 |
Wood-based panels - Determination of formaldehyde release - Part 2: Formaldehyde release by the gas analysis method |
|
DS DS/EN 717- 2/AC |
Wood-based panels - Determination of formaldehyde release - Part 2: Formaldehyde release by the gas analysis method |
|
DS DS/EN 717- 3 |
Wood-based panels - Determination of formaldehyde release - Part 3: Formaldehyde release by the flask method |
|
DS DS/EN 789 |
Timber structures - Test methods - Determination of mechanical properties of wood based panels |
|
DS DS/EN 844- 1 |
Round and sawn timber - Terminology - Part 1: General terms common to round timber and sawn timber |
|
DS DS/EN 844- 11 |
Round and sawn timber - Terminology - Part 11: Terms relating to degrade by insects |
|
DS DS/EN 844- 12 |
Round and sawn timber - Terminology - Part 12: - Additional terms and general index |
|
DS DS/EN 844- 2 |
Round and sawn timber - Terminology - Part 2: General terms relating to round timber |
|
DS DS/EN 844- 3 |
Round and sawn timber - Terminology - Part 3: General terms relating to sawn timber |
|
DS DS/EN 844- 4 |
Round and sawn timber - Terminology - Part 4: Terms relating to moisture content |
|
DS DS/EN 844- 5 |
Round and sawn timber - Terminology - Part 5: Terms relating to dimensions of round timber |
|
DS DS/EN 844- 6 |
Round and sawn timber - Terminology - Part 6: Terms relating to dimensions of sawn timber |
|
DS DS/EN 844- 7 |
Round and sawn timber - Terminology - Part 7: Terms relating to anatomical structure of timber |
|
DS DS/EN 844- 8 |
Round and sawn timber - Terminology - Part 8: Terms relating to features of round timber |
|
DS DS/EN 844- 9 |
Round and sawn timber - Terminology - Part 9: Terms relating to features of sawn timber |
|
DS DS/EN 847- 1+AC |
Tools for woodworking - Safety requirements - Part 1: Milling tools and circular saw blades |
|
DS DS/EN 847- 2 |
Tools for woodworking - Safety requirements - Part 2: Requirements for the shank of shank mounted milling tools |
|
DS DS/EN 847- 2/AC |
Tools for woodworking - Safety requirements - Part 2: Requirements for the shank of shank mounted milling tools |
|
DS DS/EN 847- 3 |
Tools for woodworking - Safety requirements - Part 3: Clamping devices |
|
DS DS/EN 848- 1 |
Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines |
|
DS DS/EN 848- 1/A1 |
Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines-(AMENDS DS/EN 848- 1) |
|
DS DS/EN 848- 2 |
Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle handfed/integrated fed routing machines |
|
DS DS/EN 848- 3 |
Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerical control (NC) boring machines and routing machines |
|
DS DS/EN 859 |
Safety of woodworking machines - Handfed surface planing machines |
|
DS DS/EN 860 |
Safety of woodworking machines - One side thickness planing machines |
|
DS DS/EN 861 |
Safety of woodworking machines - Surface planing and thicknessing machines |
|
DS DS/EN 940 |
Safety of woodworking machines - Combined woodworking machines |
|
DS DS/EN 942 |
Timber in joinery - General classification of timber quality |
|
DS DS/EN 975- 1 |
Sawn timber - Appearance grading of hardwoods - Part 1: Oak and beech |
|
DS DS/EN 975- 1/A1 |
Sawn timber - Appearance grading of hardwoods - Part 1: Oak and beech-(AMENDS DS/EN 975-1) |
|
DS DS/EN 975- 2 |
Sawn timber - Appearance grading of hardwoods - Part 2: Poplars |
|
DS DS/ENV 1099 |
Plywood - Biological durability - Guidance for the assessment of plywood for use in different hazard classes |
|
DS DS/ENV 1156 |
Wood-based panels - Determination of duration of load and creep factors |
|
DS DS/ENV 12038 |
Durability of wood and wood-based products - Wood-based panels - Method of test for determining the resistance against wood-destroying basidiomycetes |
|
DS DS/ENV 12169 |
Criteria for the assessment of conformity of a lot of sawn timber |
|
DS DS/ENV 12872 |
Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofs |
|
DS DS/ENV 13696 |
Wood and parquet flooring - Determination of elasticity and resistance to wear |
|
DS DS/ENV 14272 |
Plywood - Calculation method for some mechanical properties |
|
DS DS/ENV 14464 |
Sawn timber - Method for assessment of case-hardening |
|
DS DS/ENV 1927- 1 |
Qualitative classification of softwood round timber - Part 1: Spruces and firs |
|
DS DS/ENV 1927- 2 |
Qualitative classification of softwood round timber - Part 2: Pines |
|
DS DS/ENV 1927- 3 |
Qualitative classification of softwood round timber - Part 3: Larches and Douglas firs |
|
DS DS/ENV 635- 4 |
Plywood - Classification by surface appearance - Part 4: Parameters of ability for finishing - Guideline |
|
DS DS/ENV 717- 1 |
Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |