|
DS DS 449 |
Code of Practice for the design and construction of pile supported offshore steel structures |
|
DS DS 449 E |
Code of Practice for the design and construction of pile supported offshore steel structures |
|
DS DS 449-2 E |
Code of Practice for pile-supported offshore steel structures - Part 2: Annex A - F - Supplementary guide |
|
DS DS/CEN/CR 13737 |
Implementation Guide for functional standards prepared by CEN/TC 234 "Gas supply" |
|
DS DS/CEN/CR 13837 |
Automotive diesel fuels - Determination of filtrability - SFPP method |
|
DS DS/CEN/CR 13838 |
Automotive diesel fuels - Determination of filtrability - AGELFI method |
|
DS DS/CEN/CR 13839 |
Petroleum products - Determination of aromaticity - 13C nuclear magnetic resonance (NMR) spectrometric method |
|
DS DS/CEN/CR 13840 |
Petroleum products - Determination of polycyclic aromatic hydrocarbons - Ultraviolet (UV) spectrometric method |
|
DS DS/CEN/TR 14549 |
Guide to the use of ISO 15649 and ANSI/ASME B31.3 for piping in Europe in compliance with the Pressure Equipment Directive |
|
DS DS/CEN/TR 14745 |
Solid Recovered Fuels |
|
DS DS/CEN/TR 14980 |
Solid recovered fuels Report on relative difference between biodegradable and biogenic fractions of SRF |
|
DS DS/CEN/TR 15138 |
Petroleum products and other liquids Guide to flash point testing |
|
DS DS/CEN/TR 15139 |
Petroleum products and other liquids Applicability of test methods on sulfur determination in petrol and diesel fuel |
|
DS DS/CEN/TR 15160 |
Petroleum and related products Applicability of diesel fuel test methods for Fatty Acid Methyl Esters (FAME) Information and results on round robin tests |
|
DS DS/CEN/TS 14588 |
Solid biofuels - Terminology, definitions and descriptions |
|
DS DS/CEN/TS 14774- 1 |
Solid biofuels - Methods for determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method |
|
DS DS/CEN/TS 14774- 2 |
Solid biofuels - Methods for the determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method |
|
DS DS/CEN/TS 14774- 3 |
Solid biofuels - Methods for the determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample |
|
DS DS/CEN/TS 14775 |
Solid biofuels - Method for the determination of ash content |
|
DS DS/CEN/TS 14778- 2 |
Solid biofuels Sampling Part 2: Methods for sampling particulate material transported in lorries |
|
DS DS/CEN/TS 14779 |
Solid biofuels Sampling Methods for preparing sampling plans and sampling certificates |
|
DS DS/CEN/TS 14780 |
Solid biofuels Methods for sample preparation |
|
DS DS/CEN/TS 14918 |
Solid Biofuels Method for the determination of calorific value |
|
DS DS/CEN/TS 14961 |
Solid biofuels Fuel specifications and classes |
|
DS DS/CEN/TS 15104 |
Solid biofuels Determination of total content of carbon, hydrogen and nitrogen Instrumental methods |
|
DS DS/CEN/TS 15105 |
Solid biofuels Methods for determination of the water soluble content of chloride, sodium and potassium |
|
DS DS/CEN/TS 15150 |
Solid biofuels Methods for the determination of particle density |
|
DS DS/EN 10208- 1 |
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1. Pipes of requirement class A |
|
DS DS/EN 10208- 2+AC |
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
|
DS DS/EN 10301 |
Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas |
|
DS DS/EN 116 |
Diesel and domestic heating fuels - Determination of cold filter plugging point |
|
DS DS/EN 116/AC |
Diesel and domestic heating fuels - Determination of cold filter plugging point |
|
DS DS/EN 1160 |
Installations and equipment for liquefied natural gas - General characteristics of liquefied natural gas |
|
DS DS/EN 12 |
Petroleum products - Determination of Reid vapour pressure - Wet method |
|
DS DS/EN 12007- 1 |
Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional recommendations |
|
DS DS/EN 12007- 2 |
Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional recommendations for polyethylene (MOP up to and including 10 bar) |
|
DS DS/EN 12007- 3 |
Gas supply systems - Pipelines for maximim operating pressure up to and including 16 bar - Part 3: Specific functional recommendations for steel |
|
DS DS/EN 12007- 4 |
Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 4: Specific functional recommendations for renovation |
|
DS DS/EN 12065 |
Installations and equipment for liquefied natural gas - Testing of foam concentrates designed for generation of medium and high expansion foam and of extinguishing powders used on liquefied natural gas fires |
|
DS DS/EN 12066 |
Installations and equipment for liquified natural gas - Testing of insulating linings for liquified natural gas impounding areas |
|
DS DS/EN 12177 |
Liquid petroleum products - Unleaded petrol - Determination of benzene content by gas chromatography |
|
DS DS/EN 12177/AC |
Liquid petroleum products - Unleaded petrol - Determination of benzene content by gas chromatography |
|
DS DS/EN 12186 |
Gas supply systems - Gas pressure regulating stations for transmission and distribution - Functional requirements-Amendment A1: 10/03/2005 |
|
DS DS/EN 12302 |
Crude tar and crude benzole - Terminology |
|
DS DS/EN 12303 |
Coal tar based oils - Terminology |
|
DS DS/EN 12308 |
Installations and equipment for LNG - Suitability testing of gaskets designed for flanged joints used on LNG piping |
|
DS DS/EN 12473 |
General principles of cathodic protection in sea water |
|
DS DS/EN 12474 |
Cathodic protection for submarine pipelines |
|
DS DS/EN 12495 |
Cathodic protection for fixed steel offshore structures |
|
DS DS/EN 12583 |
Gas supply systems - Compressor stations - Functional requirements |
|
DS DS/EN 12592 |
Bitumen and bituminous binder - Determination of solubility |
|
DS DS/EN 12593 |
Bitumen and bituminous binders - Determination of the Fraass breaking point |
|
DS DS/EN 12594 |
Bitumen and bituminous binder - Preparation of test samples |
|
DS DS/EN 12595 |
Bitumen and bituminous binders - Determination of kinematic viscosity |
|
DS DS/EN 12596 |
Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary |
|
DS DS/EN 12597 |
Bitumen and bituminous binders - Terminology |
|
DS DS/EN 12606- 1 |
Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation |
|
DS DS/EN 12606- 2 |
Bitumen and bituminous binders - Determination of the paraffin wax content - Part 2: Method by extraction |
|
DS DS/EN 12607- 1 |
Bitumen and bituminous binders - Determination of the resistance to hardening under the influence of heat and air - Part 1: RTFOT method |
|
DS DS/EN 12607- 2 |
Bitumen and bituminous binders - Determination of the resistance to hardening under the influence of heat and air - Part 2: TFOT Method |
|
DS DS/EN 12607- 3 |
Bitumen and bituminous binders - Determination of the resistance to hardening under the influence of heat and air - Part 3: RFT method |
|
DS DS/EN 12634 |
Petroleum products and lubricants - Determination of acid number - Non-aqueous potentiometric titration method |
|
DS DS/EN 12662 |
Liquid petroleum products - Determination of contamination in middle distillates |
|
DS DS/EN 12732 |
Gas supply systems - Welding steel pipework - Functional requirements |
|
DS DS/EN 12766- 1 |
Petroleum products and used oils - Determination of PCBs and related products - Part 1: Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD) |
|
DS DS/EN 12766- 2 |
Petroleum products and used oils - Determination of PCBs and related products - Part 2: Calculation of polychlorinated biphenyl (PCB) content |
|
DS DS/EN 12766- 3 |
Petroleum products and used oils Determination of PCBs and related products Part 3: Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas chromatography (GC) using an electron ca |
|
DS DS/EN 12838 |
Installations and equipment for liquefied natural gas - Suitability testing of LNG sampling systems |
|
DS DS/EN 12846 |
Bitumen and bituminous binders - Determination of efflux time of bitumen emulsion by the efflux viscometer |
|
DS DS/EN 12847 |
Bitumen and bituminous binders - Determination of settling tendency of bitumen emulsions |
|
DS DS/EN 12848 |
Bitumen and bituminous binders - Determination of mixing stability with cement of bitumen emulsions |
|
DS DS/EN 12849 |
Bitumen and bituminous binders - Determination of penetration power of bitumen emulsions |
|
DS DS/EN 12850 |
Bitumen and bituminous binders - Determination of the pH value of bitumen emulsions |
|
DS DS/EN 12916 |
Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection |
|
DS DS/EN 12937 |
Petroleum products - Determination of water - Coulometric Karl Fischer titration method |
|
DS DS/EN 13012 |
Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers |
|
DS DS/EN 13016- 1 |
Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP). |
|
DS DS/EN 13016- 2 |
Liquid petroleum products - Vapour pressure - Part 2: Determination of absolute vapour pressure (AVP) between 40 øC and 100 øC |
|
DS DS/EN 13074 |
Bitumen and bituminous binders - Recovery of binder from bitumen emulsions by evaporation |
|
DS DS/EN 13075- 1 |
Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bitumen emulsions, mineral filler method |
|
DS DS/EN 13075- 2 |
Bitumen and bitumen binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bitumen emulsions |
|
DS DS/EN 13131 |
Liquid petroleum products - Determination of nickel and vanadium content - Atomic absorption spectrometric method |
|
DS DS/EN 13132 |
Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching |
|
DS DS/EN 13160- 1 |
Leak detection systems - Part 1: General principles |
|
DS DS/EN 13160- 2 |
Leak detection systems - Part 2: Pressure and vacuum systems |
|
DS DS/EN 13160- 3 |
Leak detection systems - Part 3: Liquid systems for tanks |
|
DS DS/EN 13160- 4 |
Leak detection systems - Part 4: Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces |
|
DS DS/EN 13160- 5 |
Leak detection systems - Part 5: Tank gauge leak detection systems |
|
DS DS/EN 13160- 6 |
Leak detection systems - Part 6: Sensors in monitoring wells |
|
DS DS/EN 13160- 7 |
Leak detection systems - Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets |
|
DS DS/EN 13173 |
Cathodic protection for steel offshore floating structures |
|
DS DS/EN 13179- 1 |
Tests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test |
|
DS DS/EN 13179- 2 |
Tests for filler aggregate used in bituminous mixtures - Part 2: Bitumen number |
|
DS DS/EN 13301 |
Bitumen and bituminous binders - Determination of staining tendency of bitumen |
|
DS DS/EN 13302 |
Bitumen and bituminous binders - Determination of viscosity of bitumen using a rotating spindle apparatus |
|
DS DS/EN 13303 |
Bitumen and bituminous binders - Determination af the loss in mass after heating of industrial bitumen |
|
DS DS/EN 13304 |
Bitumen and bituminous binders - Framework for specification of oxidised bitumens |
|
DS DS/EN 13305 |
Bitumen and bituminous binders - Framework of specification of hard industrial bitumen |
|
DS DS/EN 13341 |
Thermoplastics static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels Blow moulded polyethylene, rotationally moulded polyethylene and polyamide 6 by anionic polymerization tanks Requirements and test methods |
|
DS DS/EN 13352 |
Specification for the performance of automatic tank contents gauges |
|
DS DS/EN 13357 |
Bitumen and bituminous binders - Determination of the efflux time of petroleum cut-back and fluxed bitumens |
|
DS DS/EN 13358 |
Bitumen and bituminous binders - Determination of the distillation characteristics of petroleum cut-back bitumen products |
|
DS DS/EN 13398 |
Bitumen and bituminous binders - Determination of the elastic recovery of modified bitumen |
|
DS DS/EN 13399 |
Bitumen and bituminous binders - Determination of storage stability of modified bitumen |
|
DS DS/EN 13587 |
Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method |
|
DS DS/EN 13589 |
Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method |
|
DS DS/EN 1360 |
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems Specification |
|
DS DS/EN 13616 |
Overfill prevention devices for static tanks for liquid petroleum fuels |
|
DS DS/EN 13617- 1 |
Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
|
DS DS/EN 13617- 2 |
Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
|
DS DS/EN 13617- 3 |
Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves |
|
DS DS/EN 13632 |
Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen |
|
DS DS/EN 13645 |
Installations and equipment for liquefied natural gas - Design of onshore installations with a storage capacity between 5 t and 200 t |
|
DS DS/EN 13702- 1 |
Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen - Part 1: Cone and plate method |
|
DS DS/EN 13702- 2 |
Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen - Part 2: Coaxial cylinders method |
|
DS DS/EN 13703 |
Bitumen and bituminous binders - Determination of deformation energy |
|
DS DS/EN 13723 |
Petroleum products - Determination of low lead contents in gasolines - Wavelength-dispersive X-ray flourescence spectrometry (XRF) |
|
DS DS/EN 13760 |
Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions |
|
DS DS/EN 13766 |
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification |
|
DS DS/EN 13847 |
Coal tar and pitch based binders and related products - Terminology and classification |
|
DS DS/EN 13942 |
Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves |
|
DS DS/EN 14077 |
Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method |
|
DS DS/EN 14078 |
Liquid petroleum products - Determination of fatty acid methyl esters (FAME) in middle destillates - Infrared spectroscopy method |
|
DS DS/EN 14125 |
Thermoplastic and flexible metal pipework for underground installation at petrol filling stations |
|
DS DS/EN 14141 |
Valves for natural gas transportation in pipelines - Performance requirements and tests |
|
DS DS/EN 14155 |
Derivatives from coal pyrolysis - Carbon black feedstock - Specifications and test methods |
|
DS DS/EN 14156 |
Derivatives from coal pyrolysis - Coal tar based oils: Coal tar fuel - Specifications and test methods |
|
DS DS/EN 14161 |
Petroleum and natural gas industries - Pipeline transportation systems |
|
DS DS/EN 14163 |
Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines |
|
DS DS/EN 14213 |
Heating fuels - Fatty acid methyl esters (FAME) - Requirements and test methods |
|
DS DS/EN 14213/AC |
Heating fuels - Fatty acid methyl esters (FAME) - Requirements and test methods |
|
DS DS/EN 14214 |
Automotive fuels - Fatty acid methyl esters (FAME) for diesel engines - Requirements and test methods |
|
DS DS/EN 14214/AC |
Automotive fuels - Fatty acid methyl esters (FAME) for diesel engines - Requirements and test methods |
|
DS DS/EN 1425 |
Bitumen and bituminous binders - Characterization of perceptible properties |
|
DS DS/EN 1426 |
Bitumen and bituminous binders - Determination of needle penetration |
|
DS DS/EN 14261 |
Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: refractory binders - Characteristics and test methods |
|
DS DS/EN 14262 |
Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: briquetting pitch - Characteristics and test methods |
|
DS DS/EN 14263 |
Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: carbon binder pitch - Characteristics and test methods |
|
DS DS/EN 14264 |
Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products : impregnating pitch - Characteristics and test methods |
|
DS DS/EN 14265 |
Derivates from coal pyrolysis - Coal tar and pitch based binders and related products: painting tar - Characteristics and test methods |
|
DS DS/EN 14266 |
Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: coating tar - Characteristics and test methods |
|
DS DS/EN 1427 |
Bitumen and bituminous binders - Determination of softening point - Ring and ball method |
|
DS DS/EN 14274 |
Automotive fuels - Assessment of petrol and diesel quality - Fuel quality monitoring system (FQMS) |
|
DS DS/EN 14274/AC |
Automotive fuels - Assessment of petrol and diesel quality - Fuel quality monitoring system (FQMS) |
|
DS DS/EN 14275 |
Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers |
|
DS DS/EN 1428 |
Bitumen and bituminous binders - Determination of water content in bitumen emulsions - Azeotropic distillation method. |
|
DS DS/EN 1429 |
Bitumen and bituminous binders - Determination of residue on sieving of bitumen emulsions, and determination of storage stability by sieving |
|
DS DS/EN 1430 |
Bitumen and bituminous binders - Determination of particle polarity of bitumen emulsions |
|
DS DS/EN 1431 |
Bitumen and bituminous binders - Determination of recovered binder and oil distillate from bitumen emulsions by distillation |
|
DS DS/EN 14331 |
Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillates - Liquid chromatography (LC)/gas chromatography (GC) method |
|
DS DS/EN 14408- 1 |
Plastics piping systems for renovation of underground gas supply networks - Part 1: General |
|
DS DS/EN 14408- 3 |
Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes |
|
DS DS/EN 14517 |
Liquid petroleum products - Determination of hydrocarbon types and oxygenates in petrol - Multidimensional gas chromatography method |
|
DS DS/EN 14639 |
Crude tar and crude benzole Characteristics and test methods |
|
DS DS/EN 1473 |
Installation and equipment for liquefied natural gas - Design of onshore installations |
|
DS DS/EN 14733 |
Bitumen and bituminous binders Bituminous emulsions, fluxed and cut-back bitumen factory production control |
|
DS DS/EN 1474 |
Installation and equipment for liquified natural gas - Design and testing of loading/unloading arms |
|
DS DS/EN 14771 |
Bitumen and bituminous binders Determination of the flexural creep stiffness Bending Beam Rheometer (BBR) |
|
DS DS/EN 14832 |
Petroleum and related products Determination of the oxidation stability and corrosivity of fireresistant phosphate ester fluids |
|
DS DS/EN 14833 |
Petroleum and related products Determination of the hydrolytic stability of fire-resistant phosphate ester fluids |
|
DS DS/EN 14870- 2 |
Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 2: Fittings |
|
DS DS/EN 14998 |
Derivatives from coal pyrolysis Coal tar based oils: fluxings oils Specifications and test methods |
|
DS DS/EN 1532 |
Installation and equipment for liquefied natural gas - Ship to shore interface |
|
DS DS/EN 1594 |
Gas supply systems - Pipelines for maximum operating pressure over 16 bar - Functional requirements |
|
DS DS/EN 1601 |
Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID) |
|
DS DS/EN 1761 |
Rubber hoses and hose assemblies for fuel truck delivery - Specification |
|
DS DS/EN 1762 |
Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification |
|
DS DS/EN 1765 |
Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies |
|
DS DS/EN 1776 |
Gas supply systems - Natural gas measuring stations - Functional requirements |
|
DS DS/EN 1918- 1 |
Gas supply systems - Underground gas storage - Part 1: Functional recommendations for storage in aquifers |
|
DS DS/EN 1918- 2 |
Gas supply systems - Underground gas storage - Part 2: Functional recommendations for storage in oil and gas fields |
|
DS DS/EN 1918- 3 |
Gas supply systems - Underground gas storage - Part 3: Functional recommendations for storage in solution-mined salt cavities |
|
DS DS/EN 1918- 4 |
Gas supply systems - Underground gas storage - Part 4: Functional recommendations for storage in rock caverns |
|
DS DS/EN 1918- 5 |
Gas supply systems - Underground gas storage - Part 5: Functional recommendations for surface facilities |
|
DS DS/EN 228 |
Automotive fuels - Unleaded petrol - Requirements and test methods |
|
DS DS/EN 23015 |
Petroleum products - Determination of cloud point |
|
DS DS/EN 237 |
Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry |
|
DS DS/EN 238 |
Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry |
|
DS DS/EN 238/A1 |
Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry-(AMENDS DS/EN 238) |
|
DS DS/EN 241 |
Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method |
|
DS DS/EN 24260 |
Petroleum products and hydrocarbons - Determination of sulfur contents - Wickbold combustion method |
|
DS DS/EN 25163 |
Motor and aviation-type fuels - Determination of knock characteristics - Motor method |
|
DS DS/EN 25164 |
Motor fuels - Determination of knock characteristics - Research method |
|
DS DS/EN 27941 |
Commercial propane and butane - Analysis by gas chromatography |
|
DS DS/EN 377 |
Lubricants for applications in appliances and associated controls using combustible gases except those designed for use in industrial processes |
|
DS DS/EN 377/A1 |
Lubricants for applications in appliances and associated controls using combustible gases except those designed for use in industrial processes-(AMENDS DS/EN 377) |
|
DS DS/EN 41 |
Determination of the sulphur content of petroleum products by the Wickbold combustion method |
|
DS DS/EN 4404- 2 |
Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids |
|
DS DS/EN 5 |
Determination of existent gum in fuels by jet evaporation |
|
DS DS/EN 58 |
Bitumen and bituminous binders - Sampling bituminous binders |
|
DS DS/EN 589 |
Automotive fuels - LPG - Requirements and test methods |
|
DS DS/EN 590 |
Automotive fuels - Diesel - Requirements and test methods |
|
DS DS/EN 61221 |
Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications |
|
DS DS/EN 7 |
Determination of ash from petroleum products |
|
DS DS/EN 976- 1 |
Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks |
|
DS DS/EN 976- 2 |
Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 2: Transport, handling, storage and installation of single wall tanks |
|
DS DS/EN 977 |
Underground tanks of glass-reinforced plastics (GRP) - Method for one side exposure to fluids |
|
DS DS/EN 978 |
Underground tanks of glass-reinforced plastics (GRP) - Determination of factor alpha and factor beta |
|
DS DS/EN ISO 10101- 2 |
Natural gas - Determination of water by the Karl Fischer method - Part 2: Titration procedure |
|
DS DS/EN ISO 10101- 3 |
Natural gas - Determination of water by the Karl Fischer method - Part 3: Coulometric procedure |
|
DS DS/EN ISO 10370 |
Petroleum products - Dermination of carbon residue - Micro method |
|
DS DS/EN ISO 10417 |
Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress |
|
DS DS/EN ISO 10418 |
Petroleum and natural gas industries - Offshore production installations - Basic surface process safety systems |
|
DS DS/EN ISO 10423 |
Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment |
|
DS DS/EN ISO 10426- 1 |
Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification |
|
DS DS/EN ISO 10426- 1/A1 |
Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification-(AMENDS DS/EN ISO 10426-1) |
|
DS DS/EN ISO 10426- 2 |
Petroleum and natural gas industries - Cement and materials for well cementing - Part 2: Testing of well cements |
|
DS DS/EN ISO 10426- 4 |
Petroleum and natural gas industries Cements and materials for well cementing Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure |
|
DS DS/EN ISO 10427- 1 |
Petroleum and natural gas industries - Casing centralizers - Part 1: Bow- spring casing centralizers |
|
DS DS/EN ISO 10427- 2 |
Petroleum and natural gas industries - Equipment for well cementing - Part 2: Centralizer placement and stop-collar testing |
|
DS DS/EN ISO 10432 |
Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment |
|
DS DS/EN ISO 10434 |
Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries |
|
DS DS/EN ISO 10437 |
Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications |
|
DS DS/EN ISO 10438- 1 |
Petroleum, petrochemical and natural gas industries - Lubrication, shaft- sealing and control-oil systems and auxiliaries - Part 1: General requirements |
|
DS DS/EN ISO 10438- 2 |
Petroleum and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 2: Special-purpose oil systems |
|
DS DS/EN ISO 10438- 3 |
Petroleum, petrochemical and natural gas industries - Lubrication, shaft- sealing and control-oil systems and auxiliaries - Part 3: General-purpose oil systems |
|
DS DS/EN ISO 10438- 4 |
Petroleum, petrochemical and natural gas industries - Lubrication, shaft- sealing and control-oil systems and auxiliaries - Part 4: Self-acting gas seal support systems |
|
DS DS/EN ISO 10439 |
Petroleum, chemical and gas service industries - Centrifugal compressors |
|
DS DS/EN ISO 10440- 1 |
Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (oil-free) |
|
DS DS/EN ISO 10440- 2 |
Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors |
|
DS DS/EN ISO 10441 |
Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - Special purpose applications |
|
DS DS/EN ISO 10442 |
Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors |
|
DS DS/EN ISO 10715 |
Natural gas - Sampling guidelines |
|
DS DS/EN ISO 10723 |
Natural gas - Performance evaluation for on-line analytical systems |
|
DS DS/EN ISO 10723/AC |
Natural gas - Performance evaluation for on-line analytical systems |
|
DS DS/EN ISO 11439 |
Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
|
DS DS/EN ISO 11541 |
Natural gas - Determination of water content at high pressure |
|
DS DS/EN ISO 11960 |
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells |
|
DS DS/EN ISO 11961 |
Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification |
|
DS DS/EN ISO 12156- 1 |
Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - part 1: Test method |
|
DS DS/EN ISO 12185 |
Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method |
|
DS DS/EN ISO 12205 |
Petroleum products - Determination of the oxidation stability of middle-distillate fuels |
|
DS DS/EN ISO 12922 |
Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU |
|
DS DS/EN ISO 13500 |
Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests |
|
DS DS/EN ISO 13503- 1 |
Petroleum and natural gas industries Completion fluids and materials Part 1: Measurement of viscous properties of completion fluids |
|
DS DS/EN ISO 13533 |
Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment |
|
DS DS/EN ISO 13534 |
Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and remanufacture of hoisting equipment |
|
DS DS/EN ISO 13535 |
Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment |
|
DS DS/EN ISO 13625 |
Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings |
|
DS DS/EN ISO 13628- 1 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations |
|
DS DS/EN ISO 13628- 2 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Flexible pipe systems for subsea and marine applications |
|
DS DS/EN ISO 13628- 3 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems |
|
DS DS/EN ISO 13628- 4 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment |
|
DS DS/EN ISO 13631 |
Petroleum and natural gas industries - Packaged reciprocating gas compressors |
|
DS DS/EN ISO 13680 |
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions |
|
DS DS/EN ISO 13686 |
Natural gas Quality designation |
|
DS DS/EN ISO 13702 |
Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines |
|
DS DS/EN ISO 13703 |
Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms |
|
DS DS/EN ISO 13703/AC |
Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms |
|
DS DS/EN ISO 13705 |
Petroleum and natural gas industries - Fired heaters for general refinery service |
|
DS DS/EN ISO 13706 |
Petroleum and natural gas industries - Air-cooled heat exchangers |
|
DS DS/EN ISO 13709 |
Centrifugal pumps for petroleum, petrochemical and natural gas industries |
|
DS DS/EN ISO 13710 |
Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps |
|
DS DS/EN ISO 13734 |
Natural gas - Organic sulfur compounds used as odorants - Requirements and test methods |
|
DS DS/EN ISO 13736 |
Petroleum products and other liquids - Determination of flash point - Abel closed cup method |
|
DS DS/EN ISO 13757 |
Liquefied petroleum gases - Determination of oily residues - High- temperature method |
|
DS DS/EN ISO 13758 |
Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method |
|
DS DS/EN ISO 13759 |
Petroleum products - Determination of alkyl nitrate in diesel fuels - Spectrometric method |
|
DS DS/EN ISO 14111 |
Natural gas - Guidelines to traceability in analysis |
|
DS DS/EN ISO 14310 |
Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs |
|
DS DS/EN ISO 14596 |
Petroleum products - Determination of sulfur content - Wavelength- dispersive X-ray flourescence spectrometry |
|
DS DS/EN ISO 14596/CORR.1 |
Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray flourescence spectrometry |
|
DS DS/EN ISO 14597 |
Petroleum products - Determination of vanadium and nickel content - Wavelength-dispersive X-ray flourescence spectrometry |
|
DS DS/EN ISO 14691 |
Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - General purpose applications |
|
DS DS/EN ISO 14692- 1 |
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials |
|
DS DS/EN ISO 14692- 2 |
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture |
|
DS DS/EN ISO 14692- 3 |
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design |
|
DS DS/EN ISO 14692- 4 |
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation |
|
DS DS/EN ISO 14693 |
Petroleum and natural gas industries - Drilling and well-servicing equipment |
|
DS DS/EN ISO 14723 |
Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves |
|
DS DS/EN ISO 14935 |
Petroleum and related products - Determination of wick flame persistence of fire-resistant fluids |
|
DS DS/EN ISO 15029- 1 |
Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Part 1: Spray flame persistence - Hollow-cone nozzle method |
|
DS DS/EN ISO 15136- 1 |
Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps |
|
DS DS/EN ISO 15138 |
Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning |
|
DS DS/EN ISO 15138/AC |
Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning |
|
DS DS/EN ISO 15156- 1 |
Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking- resistant materials |
|
DS DS/EN ISO 15156- 2 |
Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistanct carbon and low alloyed steels, and the use of cast irons |
|
DS DS/EN ISO 15156- 3 |
Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
|
DS DS/EN ISO 1516 |
Determination of flash/no flash - Closed cup equilibrium method |
|
DS DS/EN ISO 1523 |
Determination of flash point - Closed cup equilibrium method |
|
DS DS/EN ISO 15403 |
Natural gas Designation of the quality of natural gas for use as a compressed fuel for vehicles |
|
DS DS/EN ISO 15463 |
Petroleum and natural gas industries - Field inspection of new casing, tubing and plain-end drill pipe |
|
DS DS/EN ISO 15546 |
Petroleum and natural gas industries - Aluminium alloy drill pipes |
|
DS DS/EN ISO 15547 |
Petroleum and natural gas industries - Plate heat exchangers |
|
DS DS/EN ISO 15761 |
Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries |
|
DS DS/EN ISO 16070 |
Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples |
|
DS DS/EN ISO 16812 |
Petroleum and natural gas industries - Shell-and-tube heat exchangers |
|
DS DS/EN ISO 17078- 1 |
Petroleum and natural gas industries Drilling and production equipment Part 1: Side-pocket mandrels |
|
DS DS/EN ISO 17292 |
Metal ball valves for petroleum, petrochemical and allied industries |
|
DS DS/EN ISO 17776 |
Petroleum and natural gas industries - Offshore production installations - Guidelines on tools and techniques for hazard identification and risk assessment |
|
DS DS/EN ISO 19900 |
Petroleum and natural gas industries - General requirements for offshore structures |
|
DS DS/EN ISO 19901- 2 |
Petroleum and natural gas industries Specific requirements for offshore structures Part 2: Seismic design procedures and criteria |
|
DS DS/EN ISO 19901- 4 |
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 4: Geotechnical and foundation design considerations |
|
DS DS/EN ISO 19901- 5 |
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction |
|
DS DS/EN ISO 20623 |
Petroleum and related products - Determination of the extreme- pressure and anti-wear properties of fluids - Four ball method |
|
DS DS/EN ISO 20763 |
Petroelum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method |
|
DS DS/EN ISO 20764 |
Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method |
|
DS DS/EN ISO 20783- 1 |
Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 1: Fluids in category HFAE |
|
DS DS/EN ISO 20783- 2 |
Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 2: Fluids in category HFB |
|
DS DS/EN ISO 20823 |
Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test |
|
DS DS/EN ISO 20843 |
Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC |
|
DS DS/EN ISO 20844 |
Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle |
|
DS DS/EN ISO 20846 |
Petroleum products - Determination of sulfur content of automotive fules - Ultraviolet fluorescence method |
|
DS DS/EN ISO 20847 |
Petroleum products - Determination of the sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry |
|
DS DS/EN ISO 20884 |
Petroleum products - Determination of low sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry |
|
DS DS/EN ISO 21049 |
Pumps Shaft sealing systems for centrifugal and rotary pumps |
|
DS DS/EN ISO 2160 |
Petroleum products - Corrosiveness to copper - Copper strip test |
|
DS DS/EN ISO 2592 |
Determination of flash and fire points - Cleveland open cup method |
|
DS DS/EN ISO 2719 |
Determination of flash point - Pensky-Martens closed cup method |
|
DS DS/EN ISO 3104 |
Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity |
|
DS DS/EN ISO 3104/AC |
Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity |
|
DS DS/EN ISO 3170 |
Petroleum liquids - Manual sampling |
|
DS DS/EN ISO 3171 |
Petroleum liquids - Automatic pipeline sampling |
|
DS DS/EN ISO 3405 |
Petroleum products - Determination of distillation characteristics at atmospheric pressure |
|
DS DS/EN ISO 3675 |
Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method |
|
DS DS/EN ISO 3679 |
Determination of flash point - Rapid equilibrium closed cup method |
|
DS DS/EN ISO 3680 |
Determination of flash/no flash - Rapid equilibrium closed cup method |
|
DS DS/EN ISO 3830 |
Petroleum products - Determination of lead content of gasoline - Iodine monochloride method |
|
DS DS/EN ISO 3838 |
Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods |
|
DS DS/EN ISO 3977- 5 |
Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries |
|
DS DS/EN ISO 3993 |
Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method |
|
DS DS/EN ISO 4256 |
Liquefied petroleum gases - Determination of gauge vapour pressure - LPG method |
|
DS DS/EN ISO 4257 |
Liquefied petroleum gases - Method of sampling |
|
DS DS/EN ISO 4259 |
Petroleum products - Determination and application of precision data in relation to methods of test |
|
DS DS/EN ISO 4263- 2 |
Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 2: Procedure for category HFC hydraulic fluids |
|
DS DS/EN ISO 4264 |
Petroleum products - Calculation of cetane index of middle-distillate fuels by the four-variable equation |
|
DS DS/EN ISO 4267- 2 |
Petroleum and liquid petroleum products - Calculation of oil quantities - Part 2: Dynamic measurement |
|
DS DS/EN ISO 5165 |
Petroleum products - Determination of the ignition quality diesel fuels - Cetane engine method |
|
DS DS/EN ISO 6245 |
Petroleum products - Determination of ash |
|
DS DS/EN ISO 6246/COR.1 |
Petroleum products - Gum content of light and middle distillate fuels - Jet evaporation method |
|
DS DS/EN ISO 6251 |
Liquefied petroleum gases - Corrosiveness to copper - Copper strip test |
|
DS DS/EN ISO 6326- 3 |
Natural gas - Determination of sulfur compounds - Part 3: Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry |
|
DS DS/EN ISO 6326- 5 |
Natural gas - Determination of sulfur compounds - Part 5: Lingener combustion method |
|
DS DS/EN ISO 6551 |
Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data |
|
DS DS/EN ISO 6570 |
Natural gas - Determination of potential hydrocarbon liquid content - Gravimetric methods |
|
DS DS/EN ISO 6743- 4 |
Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) |
|
DS DS/EN ISO 6807 |
Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification |
|
DS DS/EN ISO 6808 |
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification |
|
DS DS/EN ISO 6974- 1 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 1: Guidelines for tailored analysis |
|
DS DS/EN ISO 6974- 2 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 2: Measuring-system characteristics and statistics for processing of data |
|
DS DS/EN ISO 6974- 3 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns |
|
DS DS/EN ISO 6974- 4 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns |
|
DS DS/EN ISO 6974- 5 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 5: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns |
|
DS DS/EN ISO 6976 |
Natural gas Calculation of calorific values, density, relative density and Wobbe index from composition |
|
DS DS/EN ISO 6978- 1 |
Natural gas Determination of mercury Part 1: Sampling of mercury by chemisorption on iodine |
|
DS DS/EN ISO 7278- 1 |
Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 1: General principles |
|
DS DS/EN ISO 7278- 2 |
Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 2: Pipe provers |
|
DS DS/EN ISO 7536 |
Petroleum products - Determination of oxidation stability of gasoline - Induction period method |
|
DS DS/EN ISO 8222 |
Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks |
|
DS DS/EN ISO 8311 |
Refrigerated light hydrocarbon fluids - Calibration of membrane tanks and independent prismatic tanks in ships - Physical measurement |
|
DS DS/EN ISO 8754 |
Petroleum products - Determination of sulfur content - Energy- dispersive X-ray fluorescence spectrometry |
|
DS DS/EN ISO 8819 |
Liquefied petroleum gases - Determination of hydrogen sulfide - Lead acetate method |
|
DS DS/EN ISO 8973 |
Liquefied petroleum gases - Calculation method for density and vapour pressure |
|
DS DS/EN ISO 9029 |
Crude petroleum - Determination of water - Distillation method |
|
DS DS/ENV 13797 |
Corrosion protection - Carbon and low alloy steels for use in hydrogen sulfide containing environments in oil and gas production - Materials and test methods - Guidelines |
|
DS DS/ENV 1993-4- 3 |
Eurocode 3: Design of steel structures - Part 4-3: Silos, tanks and pipelines - Pipelines |
|
DS DS/ISO 10400 |
Petroleum and natural gas industries - Formulae and calculation for casing, tubing, drill pipe and line pipe properties |
|
DS DS/ISO 10405 |
Petroleum and natural gas industries - Care and use of casing and tubing |
|
DS DS/ISO 10409 |
Petroleum and natural gas industries - Application of cement lining to steel tubular goods, handling, installation and joining |
|
DS DS/ISO 10420 |
Petroleum and natural gas industries - Flexible pipe systems for subsea and marine riser applications |
|
DS DS/ISO 10422 |
Petroleum and natural gas industries - Threading, gauging, and thread inspection of casing, tubing and pipe line threads - Specification |
|
DS DS/ISO 10431 |
Petroleum and natural gas industries - Pumping units - Specification |
|
DS DS/ISO 10436 |
Petroleum and natural gas industries - General-purpose steam turbines for refinery service |
|
DS DS/ISO 10838- 1 |
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels - Part 1: Metal fittings for pipes of nominal outside diameter less than or equal to 63 mm |
|
DS DS/ISO 10838- 2 |
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels - Part 2: Metal fittings for pipes of nominal outside diameter greater than 63 mm |
|
DS DS/ISO 10838- 3 |
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels - Part 3: Thermoplastics fittings for pipes of nominal outside diameter less than or equal to 63 mm |
|
DS DS/ISO 12176- 3 |
Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 3: Operator´s badge |
|
DS DS/ISO 13678 |
Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing and line pipe |
|
DS DS/ISO 13879 |
Petroleum and natural gas industries - Content and drafting of a functional specification |
|
DS DS/ISO 13880 |
Petroleum and natural gas industries - Content and drafting of a technical specification |
|
DS DS/ISO 14224 |
Petroleum and natural gas industries - Collection and exchange of reliability and maintenance data for equipment |
|
DS DS/ISO 14687 |
Hydrogen fuel Product specification-DS/ISO 14687/Corr.1 |
|
DS DS/ISO 15590- 1 |
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends |
|
DS DS/ISO 15663- 1 |
Petroleum and natural gas industries - Life cycle costing - Part 1: Methodology |
|
DS DS/ISO 15663- 2 |
Petroleum and natural gas industries - Life-cycle costing - Part 2: Guidance on application of methodology and calculation methods |
|
DS DS/ISO 15663- 3 |
Petroleum and natural gas industries - Life-cycle costing - Part 3: Implementation guidelines |
|
DS DS/ISO 1928 |
Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method, and calculation of net calorific value |
|
DS DS/ISO 3183- 3 |
Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery conditions - Part 3: Pipes of requirement class C |
|
DS DS/ISO 334 |
Solid mineral fuels - Determination of total sulphur - Eschka method |
|
DS DS/ISO 351+COR.1 |
Solid mineral fuels - Determination of total sulfur - High temperature combustion method |
|
DS DS/ISO 5163 |
Motor and aviation-type fuels - Determination of knock characteristics - Motor method |
|
DS DS/ISO 5164 |
Motor fuels - Determination of knock characteristics - Research method |
|
DS DS/ISO 540 |
Solid mineral fuels - Determination of fusibility of ash - High- temperature tube method |
|
DS DS/ISO 587 |
Solid mineral fuels - Determination of chlorine using Eschka mixture |
|
DS DS/ISO 601 |
Solid mineral fuels - Determination of arsenic content using the standard silver diethyldithiocarbamate photometric method of ISO 2590 |
|
DS DS/ISO 609+COR.1 |
Solid mineral fuels - Determination of carbon and hydrogen - High temperature combustion method |
|
DS DS/ISO 622 |
Solid mineral fuels - Determination of phosphorus content - Reduced molybdophosphate photometric method |
|
DS DS/ISO 625+COR.1 |
Solid mineral fuels - Determination of carbon and hydrogen - Liebig method |
|
DS DS/ISO 925 |
Solid mineral fuels - Determination of carbonate carbon content - Gravimetric method |
|
DS DS/ISO/TR 13637 |
Petroleum and natural gas industries - Mooring of mobile offshore drilling units (MODUS) - Design and analysis |
|
DS DS/ISO/TR 13881 |
Petroleum and natural gas industries - Classification and conformity assessment of products, processes and services |
|
DS DS/R 461 |
Recommendation for transportation and installation of offshore structures |