|
DS DS 457 |
Code of Practice for fume cupboards |
|
DS DS 473 |
Precautions against Fire and Explosions in Laboratories |
|
DS DS/CEN/CR 14244 |
Durability of wood and wood-based products - Recommendations for measurement of emissions to the environment from treated wood in service |
|
DS DS/CEN/CR 14269 |
Chemicals used for treatment of water intended for human consumption - Guidelines for the purchase |
|
DS DS/CEN/TR 14542 |
Durability of wood and wood-based products - Guidelines for the validity of test results from former standards after their revision |
|
DS DS/CEN/TR 14723 |
Durability of wood and wood-based products - Field and accelerated conditioning tests (FACT) for wood preservative out of ground contact |
|
DS DS/CEN/TR 14740 |
Chemicals used for treatment of water intended for human consumption - Ozone-Production - Guidelines for installations and minimal functional requirements |
|
DS DS/CEN/TR 14839 |
Wood preservatives - Determination of the preventive efficacy against wood destroying basidiomycetes fungi |
|
DS DS/CEN/TS 12037 |
Wood preservatives - Field test method for determining the relative protective effectiveness of a wood preservative exposed out of ground contact - Horizontal lap-joint method |
|
DS DS/CEN/TS 13763- 27 |
Explosives for civil uses - Detonators and relays - Part 27: Definitions, methods and requirements for electronic initiation systems |
|
DS DS/CEN/TS 15082 |
Wood preservatives Determination of the preventive effectiveness against sapstain fungi and mould fungi on freshly sawn timber Field test |
|
DS DS/EN 1014- 1 |
Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 1: Procedure for sampling creosote |
|
DS DS/EN 1014- 2 |
Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 2: Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis |
|
DS DS/EN 1014- 3 |
Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 3: Determination of the benzo(a)pyrene content of creosote |
|
DS DS/EN 1014- 4 |
Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 4: Determination of the water-extractable phenols content of creosote |
|
DS DS/EN 1017 |
Chemicals used for treatment of water intended for human consumption - Half-burnt dolomite |
|
DS DS/EN 1018 |
Chemicals used for treatment of water intended for human consumption - Calcium carbonate |
|
DS DS/EN 1019 |
Chemicals used for treatment of water intended for human consumption - Sulfur dioxide |
|
DS DS/EN 1040 |
Chemical disinfectants and antiseptics - Basic bactericidal activity - Test method and requirements (phase 1) |
|
DS DS/EN 113 |
Wood preservatives - Test method for determining the protective effectiveness against wood destroying basidiomycetes - Determination of the toxic values |
|
DS DS/EN 113/A1 |
Wood preservatives - Test method for determining the protective effectiveness against wood destroying basidiomycetes - Determination of the toxic values- (AMENDS DS/EN 113) |
|
DS DS/EN 117 |
Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method) |
|
DS DS/EN 118 |
Wood preservatives - Determination of preventive action against Reticulitermes species (European termites) (Laboratory method) |
|
DS DS/EN 1197 |
Chemicals used for treatment of water intended for human consumption - Monozinc phosphate solution |
|
DS DS/EN 1198 |
Chemicals for treatment of water intended for human consumption - Sodium dihydrogen orthophosphate |
|
DS DS/EN 1199 |
Chemicals used for treatment of water intended for human consumption - Disodium hydrogen orthophosphate |
|
DS DS/EN 1200 |
Chemicals used for treatment of water intended for human consumption - Trisodium orthophosphate |
|
DS DS/EN 1201 |
Chemicals used for treatment of water intended for human consumption - Monopotassium dihydrogen orthophosphate |
|
DS DS/EN 1202 |
Chemicals used for treatment of water intended for human consumption - Dipotassium hydrogen orthophosphate |
|
DS DS/EN 1203 |
Chemicals used for treatment of water intended for human consumption - Tripotassium orthophosphate |
|
DS DS/EN 1204 |
Chemicals used for treatment of water intended for human consumption Calcium tetrahydrogen bis (ortophosphate) |
|
DS DS/EN 1205 |
Chemicals used for treatment of water intended for human consumption Disodium dihydrogen pyrophosphate |
|
DS DS/EN 1206 |
Chemicals used for treatment of water intended for human consumption - Tetrasodium pyrophosphate |
|
DS DS/EN 1207 |
Chemicals used for treatment of water intended for human consumption - Tetrapotassium pyrophosphate |
|
DS DS/EN 1208 |
Chemicals used for treatment of water intended for human consumption - Sodium calcium polyphosphate |
|
DS DS/EN 1209 |
Chemicals used for treatment of water intended for human consumption - Sodium silicate |
|
DS DS/EN 1210 |
Chemicals used for treatment of water intended for human consumption - Sodium tripolyphosphate |
|
DS DS/EN 1211 |
Chemicals used for treatment of water intended for human consumption - Potassium tripolyphosphate |
|
DS DS/EN 1212 |
Chemicals used for treatment of water intended for human consumption - Sodium polyphosphate |
|
DS DS/EN 12120 |
Chemicals used for treatment of water intended for human consumption - Sodium hydrogen sulfite |
|
DS DS/EN 12121 |
Chemicals used for treatment of water intended for human consumption - Sodium disulfite |
|
DS DS/EN 12122 |
Chemicals used for treatment of water intended for human consumption - Ammonia solution |
|
DS DS/EN 12123 |
Chemicals used for treatment of water intended for human consumption - Ammonium sulfate |
|
DS DS/EN 12124 |
Chemicals used for treatment of water intended for human consumption - Sodium sulfite |
|
DS DS/EN 12125 |
Chemicals used for treatment of water intended for human consumption - Sodium thiosulfate |
|
DS DS/EN 12126 |
Chemicals used for treatment of water intended for human consumption - Liquefied ammonia |
|
DS DS/EN 12139 |
Surface active agents - Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC |
|
DS DS/EN 12173 |
Chemicals used for treatment of water intended for human consumption - Sodium fluoride |
|
DS DS/EN 12174 |
Chemicals used for treatment of water intended for human consumption - Sodium hexafluorosilicate |
|
DS DS/EN 12175 |
Chemicals used for treatment of water intended for human consumption - Hexafluorosilicic acid |
|
DS DS/EN 12353 |
Chemical disinfectants and antiseptics - Preservation of microbial strains used for the determination of bactericidal and fungicidal activity |
|
DS DS/EN 12386 |
Chemicals used for treatment of water intended for human consumption - Copper sulfate |
|
DS DS/EN 12458 |
Surface active agents - Determination of stability in hard water |
|
DS DS/EN 12485 |
Chemicals used for treatment of water intended for human consumption - Calcium carbonate, high-calcium lime and half-burnt dolomite - Test methods |
|
DS DS/EN 12518 |
Chemicals used for treatment of water intended for human consumption - High-calcium lime |
|
DS DS/EN 12582 |
Surface active agents - Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD |
|
DS DS/EN 1262 |
Surface active agents - Determination of the pH value of solutions or dispersions |
|
DS DS/EN 12671 |
Chemicals used for treatment of water intended for human consumption - Chlorine dioxide |
|
DS DS/EN 12672 |
Chemicals used for treatment of water intended for human consumption - Potassium permanganate |
|
DS DS/EN 12678 |
Chemicals used for treatment of water intended for human comsumption - Potassium peroxomonosulfate |
|
DS DS/EN 12728 |
Surface active agents - Determination of foaming power - Perforated disc beating method |
|
DS DS/EN 1275 |
Chemical disinfectants and antiseptics - Basic fungicidal activity - Test method and requirements (Phase 1) |
|
DS DS/EN 1276 |
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic, and institutional areas - Test method and requirements (phase 2 |
|
DS DS/EN 1278 |
Chemicals used for treatment of water intended for human consumption - Ozone |
|
DS DS/EN 12829 |
Surface active agents - Preparation of water with known calcium hardness |
|
DS DS/EN 12836 |
Surface active agents - Determination of the water number of alkoxylated products |
|
DS DS/EN 12876 |
Chemicals used for treatment of water intended for human consumption - Oxygen |
|
DS DS/EN 12901 |
Products used for treatment of water intended for human consumption - Inorganic supporting and filtering materials - Definitions |
|
DS DS/EN 12903 |
Products used for treatment of water intended for human consumption - Powdered activated carbon |
|
DS DS/EN 12904 |
Products used for treatment of water intended for human consumption - Silica sand and silica gravel |
|
DS DS/EN 12905 |
Products used for treatment of water intended for human consumption - Expanded aluminosilicate |
|
DS DS/EN 12906 |
Products used for treatment of water intended for human consumption - Pumice |
|
DS DS/EN 12907 |
Products used for treatment of water intended for human consumption - Pyrolyzed coal material |
|
DS DS/EN 12909 |
Products used for treatment of water intended for human consumption - Anthracite |
|
DS DS/EN 12910 |
Products used for treatment of water intended for human consumption - Garnet |
|
DS DS/EN 12911 |
Products used for treatment of water intended for human consumption - Manganese Greensand |
|
DS DS/EN 12912 |
Products used for treatment of water intended for human consumption - Barite |
|
DS DS/EN 12913 |
Products used for treatment of water intended for human consumption. Powdered diatomaceous earth |
|
DS DS/EN 12914 |
Products used for treatment of water intended for human consumption - Powdered perlite |
|
DS DS/EN 12915- 1 |
Products used for treatment of water intended for human consumption - Granular activated carbon - Part 1: Virgin granular activated carbon |
|
DS DS/EN 12915- 2 |
Products used for the treatment of water intended for human consumption - Granular activated carbon - Part 2: Reactivated granular activated carbon |
|
DS DS/EN 12926 |
Chemicals used for treatment of water intended for human consumption - Sodium peroxodisulfate |
|
DS DS/EN 12931 |
Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, anhydrous |
|
DS DS/EN 12932 |
Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, dihydrate |
|
DS DS/EN 12933 |
Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Trichloroisocyanuric acid |
|
DS DS/EN 12974 |
Surface active agents - Determination of the 1,4-dioxane content in alkyl-ethoxy-sulfate products by GLC/head space procedure |
|
DS DS/EN 1302 |
Chemicals used for treatment of water intended for human consumption - Aluminium-based coagulants. Analytical methods |
|
DS DS/EN 1302/AC |
Chemicals used for treatment of water intended for human consumption - Aluminium-based coagulants - Analytical methods |
|
DS DS/EN 13150 |
Workbenches for laboratories - Dimensions, safety requirements and test methods |
|
DS DS/EN 13176 |
Chemicals used for treatment of water intended for human consumption - Ethanol |
|
DS DS/EN 13177 |
Chemicals used for treatment of water intended for human consumption - Methanol |
|
DS DS/EN 13194 |
Chemicals used for treatment of water intended for human consumption - Acetic acid |
|
DS DS/EN 13267 |
Surface active agents - Determination of water content - Karl Fischer metod |
|
DS DS/EN 13268 |
Surface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adducts. |
|
DS DS/EN 13268/AC |
Surface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adducts. |
|
DS DS/EN 13270 |
Surface active agents - Determination of the active matter content in alkyldimethylbetaines |
|
DS DS/EN 13270/AC |
Surface active agents - Determination of the active matter content in alkyldimethylbetaines |
|
DS DS/EN 13273 |
Surface active agents - Determination of the content of non-ionic substances in anionic surface active agents by high performance liquid chromatograph (HPLC) |
|
DS DS/EN 13320 |
Surface active agents - Gas chromatographic trace determination of free ethylene oxide in ethoxylates |
|
DS DS/EN 13405 |
Surface active agents - Determination of dialkyl-tetralins content in linear alkylbenzene by high performance liquid chromatographic (HPLC) |
|
DS DS/EN 13435 |
Surface active agents - Determination of free amine content of alkyl dimethyl betaines |
|
DS DS/EN 13560 |
Surface active agents - Determination of amide nitrogen content - Potentiometric titration |
|
DS DS/EN 13560/AC |
Surface active agents - Determination of amide nitrogen content - Potentiometric titration |
|
DS DS/EN 13610 |
Chemical disinfectants - Quantitative suspension test for the evaluation of virucidal activity against bacteriophages of chemical disinfectants used in food and industrial areas - Test method and requirements (phase 2, step 1) |
|
DS DS/EN 13630- 1 |
Explosives for civil uses - Detonating cord and safety fuses - Part 1: Requirements |
|
DS DS/EN 13630- 10 |
Explosives for civil uses Detonating cords and safety fuses Part 10: Determination of initiating capability of detonating cords |
|
DS DS/EN 13630- 11 |
Explosives for civil uses - Detonating cords and safety fuses - Part 11: Determination of velocity of detonation of detonating cords |
|
DS DS/EN 13630- 12 |
Explosives for civil uses - Detonating cords and safety fuses - Part 12: Determination of burning duration of safety fuses |
|
DS DS/EN 13630- 2 |
Eksplosives for civil uses - Detonating cords and safety fuses - Part 2: Determination of thermal stability of detonating cords and safety fuses |
|
DS DS/EN 13630- 3 |
Eksplosives for civil uses - Detonating cords and safety fuses - Part 3: Determination of sensitiveness to friction of the core of detonating cords |
|
DS DS/EN 13630- 4 |
Explosives for civil uses - Detonating cords and safety fuses - Part 4: Determination of sensitiveness to impact of detonating cords |
|
DS DS/EN 13630- 5 |
Explosives for civil uses - Detonating cords and safety fuses - Part 5: Determination of resistance to abrasion of detonating cords |
|
DS DS/EN 13630- 6 |
Explosives for civil uses - Detonating cords and safety fuses - Part 6: Determination of the resistance to tension of detonating cords |
|
DS DS/EN 13630- 7 |
Explosives for civil uses - Detonating cords and safety fuses - Part 7: Determination of the reliability of initation of detonating cords |
|
DS DS/EN 13630- 8 |
Explosives for civil uses - Detonating cords and safety fuses - Part 8: Determination of resistance to water of detonating cords and safety fuses |
|
DS DS/EN 13630- 9 |
Explosives for civil uses - Detonating cords and safety fuses - Part 9: Determination of transmission of detonation from detonating cord to detonating cord |
|
DS DS/EN 13631- 10 |
Explosives for civil uses - High explosives - Part 10: Method for the verification of the means of initiation |
|
DS DS/EN 13631- 11 |
Explosives for civil uses - High explosives - Part 11: Determination of transmission of detonation |
|
DS DS/EN 13631- 12 |
Explosives for civil uses - High explosives - Part 12: Specification of boosters with different initiating capability |
|
DS DS/EN 13631- 13 |
Explosives for civil uses - High explosives - Part 13: Determination of density |
|
DS DS/EN 13631- 14 |
Explosives for civil uses - High explosives - Part 14: Determination of velocity of detonation |
|
DS DS/EN 13631- 16 |
Explosives for civil uses - High explosives - Part 16: Detection and measurement of toxic gases |
|
DS DS/EN 13631- 2 |
Explosives for civil uses - High explosives - Part 2: Determination of thermal stability of explosives |
|
DS DS/EN 13631- 3 |
Explosives for civil uses - High explosives - Part 3: Determination of sensitiveness to friction of explosives |
|
DS DS/EN 13631- 4 |
Explosives for civil uses - High explosives - Part 4: Determination of sensitiveness to impact of explosives |
|
DS DS/EN 13631- 5 |
Explosives for civil uses - High explosives - Part 5: Determination of resistance to water |
|
DS DS/EN 13631- 6 |
Explosives for civil uses - High explosives - Part 6: Determination of resistance to hydrostatic pressure |
|
DS DS/EN 13631- 7 |
Explosives for civil uses - High explosives - Part 7: Determination of safety and reliability at extreme temperatures |
|
DS DS/EN 13697 |
Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and requirements |
|
DS DS/EN 13704 |
Chemical disinfectants - Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and requirements (phase 2, step 1) |
|
DS DS/EN 13716 |
Surface active agents - Determination of total base nitrogen - Potentiometric titration |
|
DS DS/EN 13717 |
Surface active agents - Determination of primary, secondary and tertiary amino nitrogen - Potentiometric titration |
|
DS DS/EN 13752 |
Products used for treatment of water intended for human consumption - Manganese dioxide |
|
DS DS/EN 13753 |
Products used for treatment of water intended for human consumption - Granular activated alumina |
|
DS DS/EN 13754 |
Products used for treatment of water intended for human consumption - Bentonite |
|
DS DS/EN 13763- 1 |
Explosives for civil uses - Detonators and relays - Part 1: Requirements |
|
DS DS/EN 13763- 11 |
Explosives for civil uses - Detonators and relays - Part 11: Determination of resistance to damage by dropping of detonators and relays |
|
DS DS/EN 13763- 12 |
Explosives for civil uses - Detonators and relays - Part 12: Determination of resistance to hydrostatic pressure |
|
DS DS/EN 13763- 13 |
Explosives for civil uses - Detonators and relays - Part 13: Determination of resistance of electric detonators against eletrostatic discharge |
|
DS DS/EN 13763- 15 |
Explosives for civil uses - Detonators and relays - Part 15: Determination of equivalent initiating capability |
|
DS DS/EN 13763- 16 |
Explosives for civil uses - Detonators and relays - Part 16: Determination of delay accuracy |
|
DS DS/EN 13763- 17 |
Explosives for civil uses - Detonators and relays - Part 17: Determination of no-fire current of electric detonators |
|
DS DS/EN 13763- 18 |
Explosives for civil uses - Detonators and relays - Part 18: Determination of series firing current of electric detonators |
|
DS DS/EN 13763- 19 |
Explosives for civil uses - Detonators and relays - Part 19: Determination of firing impulse of electric detonators |
|
DS DS/EN 13763- 2 |
Explosives for civil uses - Detonators and relays - Part 2: Determination of thermal stability |
|
DS DS/EN 13763- 20 |
Explosives for civil uses - Detonators and relays - Part 20: Determination of total resistance of electric detonators |
|
DS DS/EN 13763- 21 |
Explosives for civil uses - Detonators and relays - Part 21: Determination of flash-over voltage of electric detonators |
|
DS DS/EN 13763- 22 |
Explosives for civil uses - Detonators and relays - Part 22: Determination of capacitance, insulation resistance and insulation breakdown of leading wires |
|
DS DS/EN 13763- 23 |
Explosives for civil uses - Detonators and relays - Part 23: Determination of the shock-wave velocity of shock tube |
|
DS DS/EN 13763- 24 |
Explosives for civil uses - Detonators and relays - Part 24: Determination of the electrical non-conductivity of shock tube |
|
DS DS/EN 13763- 25 |
Explosives for civil uses - Detonators and relays - Part 25: Determination of transfer capability of surface connectors, relays and coupling accessories |
|
DS DS/EN 13763- 26 |
Explosives for civil uses - Detonators and relays - Part 26: Definitions, methods, and requirements for devices and accessories for reliable and safe function of detonators and relays |
|
DS DS/EN 13763- 3 |
Explosives for civil uses - Detonators and relays - Part 3: Determination of sensitiveness to impact |
|
DS DS/EN 13763- 4 |
Explosives for civil uses - Detonators and relays - Part 4: Determination of resistance to abrasion of leading wires and shock tubes |
|
DS DS/EN 13763- 5 |
Explosives for civil uses - Detonators and relays - Part 5: Determination of resistance to cutting damage of leading wires and shock wires |
|
DS DS/EN 13763- 6 |
Explosives for civil uses - Detonators and relays - Part 6: Determination of resistance to cracking in low temperatures of leading wires |
|
DS DS/EN 13763- 7 |
Explosives for civil uses - Detonators and relays - Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures |
|
DS DS/EN 13763- 8 |
Explosives for civil uses - Detonators and relays - Part 8: Determination of the resistance to vibration of plain detonators |
|
DS DS/EN 13763- 9 |
Explosives for civil uses - Detonators and relays - Part 9: Determination of resistance to bending of detonators |
|
DS DS/EN 13792 |
Colour coding of taps and valves for use in laboratories |
|
DS DS/EN 13857- 1 |
Explosives for civil uses - Part 1: Terminology |
|
DS DS/EN 13857- 3 |
Explosives for civil uses - Part 3: Information to be provided by the manufacturer or his authorised representative to the user |
|
DS DS/EN 13926 |
Surface active agents - Alkoxylated derivatives - Determination of hydroxyl value - N-methyl imidazole method |
|
DS DS/EN 13938- 1 |
Explosives for civil uses - Propellants and rocket propellants - Part 1: Requirements |
|
DS DS/EN 13938- 2 |
Explosives for civil uses - Propellants and rocket propellants - Part 2: Determination of resistance to electrostatic energy |
|
DS DS/EN 13938- 3 |
Explosives for civil uses - Propellants and rocket propellants - Part 3: Determination of deflagration of detonation transition |
|
DS DS/EN 13938- 4 |
Explosives for civil uses - Propellants and rocket propellants - Part 4: Determination of burning rate under ambient conditions |
|
DS DS/EN 13938- 5 |
Explosives for civil uses - Propellants and rocket propellants - Part 5: Determination of voids and fissures |
|
DS DS/EN 13938- 6 |
Explosives for civil uses - Propellants and rocket propellants - Part 6: Solid rocket propellants - Guide for the determination of integrity of inhibitor coatings |
|
DS DS/EN 13938- 7 |
Explosives for civil uses - Propellants and rocket propellants - Part 7: Determination of properties of black powder |
|
DS DS/EN 13955 |
Surface active agents - Determination of Krafft point and solubility of ionic surface active agents |
|
DS DS/EN 13991 |
Derivatives from coal pyrolysis - Coal tar based oils: creosotes - Specifications and test methods |
|
DS DS/EN 13996 |
Surface active agents - Foaming power and antifoaming power - Turbine stirring method |
|
DS DS/EN 14035- 1 |
Fireworks - Part 1: Terminology |
|
DS DS/EN 14035- 10 |
Fireworks - Part 10: Double Bangers - Specification and test methods |
|
DS DS/EN 14035- 12 |
Fireworks - Part 12: Flash bangers and flash banger batteries - Specification and test methods |
|
DS DS/EN 14035- 13 |
Fireworks - Part 13: Flash pellets - Specification and test methods |
|
DS DS/EN 14035- 15 |
Fireworks - Part 15: Fountains - Specification and test methods |
|
DS DS/EN 14035- 17 |
Fireworks - Part 17: Ground spinners - Specification and test methods |
|
DS DS/EN 14035- 19 |
Fireworks - Part 19: Hand-held sparklers - Specification and test methods |
|
DS DS/EN 14035- 2 |
Fireworks - Part 2: Categorisation |
|
DS DS/EN 14035- 22 |
Fireworks - Part 22: Mines - Specification and test methods |
|
DS DS/EN 14035- 23 |
Fireworks - Part 23: Non-hand-held sparklers - Specification and test methods |
|
DS DS/EN 14035- 24 |
Fireworks - Part 24: Novelty matches - Specification and test methods |
|
DS DS/EN 14035- 27 |
Fireworks - Part 27: Rockets - Specification and test methods |
|
DS DS/EN 14035- 28 |
Fireworks - Part 28: Roman candles - Specification and test methods |
|
DS DS/EN 14035- 29 |
Fireworks - Part 29: Serpents - Specification and test methods |
|
DS DS/EN 14035- 3 |
Fireworks - Part 3: Aerial wheels - Specification and test methods |
|
DS DS/EN 14035- 34 |
Fireworks - Part 34: Table bombs - Specification and test methods |
|
DS DS/EN 14035- 36 |
Fireworks - Part 36: Wheels - Specification and test methods |
|
DS DS/EN 14035- 4 |
Fireworks - Part 4: Bangers and banger batteries - Specification and test methods |
|
DS DS/EN 14035- 6 |
Fireworks - Part 6: Bengal flames - Specification and test methods |
|
DS DS/EN 14035- 7 |
Fireworks - Part 7: Bengal matches - Specification and test methods |
|
DS DS/EN 14035- 8 |
Fireworks - Part 8: Bengal sticks - Specification and test methods |
|
DS DS/EN 14035- 9 |
Fireworks - Part 9: Crackling granules - Specification and test methods |
|
DS DS/EN 1405 |
Chemicals used for treatment of water intended for human consumption - Sodium alginate |
|
DS DS/EN 14056 |
Laboratory furniture - Recommendations for design and installation |
|
DS DS/EN 1406 |
Chemicals used for treatment of water intended for human consumption - Modified starches |
|
DS DS/EN 1407 |
Chemicals used for treatment of water intended for human consumption - Anionic and non-ionic polyacrylamides |
|
DS DS/EN 1408 |
Chemicals used for treatment of water intended for human consumption - Poly(diallyldimethylammonium chloride) |
|
DS DS/EN 1409 |
Chemicals used for treatment of water intended for human consumption - Polyamines |
|
DS DS/EN 1410 |
Chemicals used for treatment of water intended for human consumption - Cationic polyacrylamides |
|
DS DS/EN 14128 |
Durability of wood and wood-based products - Performance criteria for curative wood preservatives as determined by biological tests |
|
DS DS/EN 14175- 1 |
Fume cupboards - Part 1: Vocabulary |
|
DS DS/EN 14175- 2 |
Fume cupboards - Part 2: Safety and performance requirements |
|
DS DS/EN 14175- 2 |
Fume cupboards - Part 4: On-site test methods |
|
DS DS/EN 14175- 3 |
Fume cupboards - Part 3: Type test methods |
|
DS DS/EN 14204 |
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants and antiseptics used in veterinary area - Test method and requirements (phase 2, step 1) |
|
DS DS/EN 1421 |
Chemicals used for treatment of water intended for human consumption - Ammonium chloride |
|
DS DS/EN 14210 |
Surface active agents - Determination of interfacial tension of solutions of surface active agents by the stirrup or ring method |
|
DS DS/EN 14291 |
Foam producing solutions for leak detection on gas installations |
|
DS DS/EN 14349 |
Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary field on non-porous surfaces without mechanical action - Test method and requiremen |
|
DS DS/EN 14368 |
Products used for treatment of water intended for human consumption - Manganese dioxide coated limestone |
|
DS DS/EN 14369 |
Products used for treatment of water intended for human consumption - Iron-coated granular activated alumina |
|
DS DS/EN 14370 |
Surface active agents - Determination of surface tension |
|
DS DS/EN 14371 |
Surface active agents - Determination of foamability and degree of foamability - Circulation test method |
|
DS DS/EN 14456 |
Products used for treatment of water intended for human consumption - Bone charcoal |
|
DS DS/EN 14470- 1 |
Fire safety storage cabinets - Part 1: Safety storage cabinets for flammable liquids |
|
DS DS/EN 14480 |
Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method |
|
DS DS/EN 14664 |
Chemicals used for treatment of water intended for human consumption - Iron (III) sulfate, solid |
|
DS DS/EN 14666 |
Surface active Agents Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules Gas chromatographic method |
|
DS DS/EN 14667 |
Surface active agents Determination of low boiling solvents in liquid formulations Gas chromatographic method |
|
DS DS/EN 14668 |
Surface active agents Determination of quaternary ammonium surface active agents in raw materials and formulated products Potentiometric two-phase titration method |
|
DS DS/EN 14669 |
Surface active agents Determination of anionic surface active agents and soaps in detergents and cleansers Potentiometric two-phase titration method |
|
DS DS/EN 14670 |
Surface active agents Sodium dodecyl sulfate Analytical method |
|
DS DS/EN 14712 |
Surface active agents Determination of physical stability in alkaline and acid solutions |
|
DS DS/EN 14880 |
Surface active agents Determination of inorganic sulphate content in anionic surface active agents Potentiometric lead selective electrode titration method |
|
DS DS/EN 14881 |
Surface active agents Determination of N-(3- dimethylaminopropyl)- alkylamide content in alkylamidopropylbetaines Gas chromatographic method |
|
DS DS/EN 1557 |
Surface active agents - Colorimetric characterization of optically clear coloured liquids (products) as X, Y, Z tristimulus values in transmission |
|
DS DS/EN 1595 |
Pressure equipment made from borosilicate glass 3.3 - General rules for design, manufacture and testing |
|
DS DS/EN 1650 |
Chemical disinfectants and antiseptics - Quantitive suspension test for the evaluation of fungicidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic, and institutional areas - Test method and requirements (phase 2, st |
|
DS DS/EN 1656 |
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary field - Test method and requirements (phase 2/step 1) |
|
DS DS/EN 1657 |
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal activity of chemical disinfectants and antiseptics used in veterinary area - Test method and requirements (phase 2, step 1) |
|
DS DS/EN 1772 |
Surface active agents - Determination of wetting power by immersion |
|
DS DS/EN 1791 |
Surface active agents - Fatty alkyl dimethyl amine oxides - Determination of the amine oxide content |
|
DS DS/EN 1890 |
Surface active agents - Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide |
|
DS DS/EN 20- 1 |
Wood preservatives - Determination of the protective effectiveness against Lyctus brunneus (Stephens) - Part 1: Application by surface treatment (laboratory method) |
|
DS DS/EN 20- 2 |
Wood preservatives - Determination of the protective effectiveness against Lyctus brunneus (Stephens) - Part 2: Application by impregnation (laboratory method) |
|
DS DS/EN 21/AC |
Wood preservatives - Determination of the toxic values against Anobium punctatum (de Geer) by larval transfer - Laboratory method |
|
DS DS/EN 212 |
Wood preservatives - General guidance on sampling and preparation for analysis of wood preservatives and treated timber |
|
DS DS/EN 252/AC1 |
Field test method for determining the relative protective effectiveness of a wood preservative in ground contact |
|
DS DS/EN 268 |
Propellants for commercial ammunition - Requirements and test methods |
|
DS DS/EN 273 |
Wood preservatives - Determination of the curative action against Lyctus brunneus (Stephens) (laboratory method) |
|
DS DS/EN 275 |
Wood preservatives - Determination of the protective effectiveness against marine borers |
|
DS DS/EN 330 |
Wood preservatives - Field test method for determining the relative protective effectiveness of a wood preservative for use under a coating and exposed-out-of ground contact: L-joint method |
|
DS DS/EN 335- 1 |
Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 1: General |
|
DS DS/EN 370 |
Wood preservatives - Determination of eradicant efficacy in preventing emergence of Anobium punctatum (De Geer) |
|
DS DS/EN 46- 1 |
Wood preservatives Determination of the preventive action against Hylotrupes bajulus (Linnaeus) Part 1: Larvicidial effect (Laboratory method) |
|
DS DS/EN 47 |
Wood preservatives Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) (Laboratory method) |
|
DS DS/EN 47/AC |
Wood preservatives - Determination of the toxic values against Hylotrupes bajulus (Linnaeus) larvae - Laboratory method |
|
DS DS/EN 48 |
Wood preservatives Determination of eradicant action against larvae of Anobium punctatum (De Geer) (laboratory method) |
|
DS DS/EN 49- 1 |
Wood preservatives Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival Part 1: Application by surface treatment (laboratory method) |
|
DS DS/EN 49- 2 |
Wood preservatives - Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival - Part 2: Application by impregnation (Laboratory method) |
|
DS DS/EN 51988 |
Products used for treatment of water intended for human consumption - Inorganic supporting and filtering materials - Methods of test |
|
DS DS/EN 599- 1 |
Durability of wood and wood-based products - Performance of preventive wood preservatives as determined by biological tests - Part 1: Specification according to hazard class |
|
DS DS/EN 599- 2 |
Durability of wood and wood-based products - Performance of preventive wood preservatives as determined by biological tests - Part 2: Classification and labelling |
|
DS DS/EN 61010- 1 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
|
DS DS/EN 61010- 1/CORR. |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
|
DS DS/EN 61010- 1/CORR.1 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
|
DS DS/EN 61010- 1/CORR.2 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
|
DS DS/EN 61010-2- 010 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of material |
|
DS DS/EN 61010-2-020 + A1 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges |
|
DS DS/EN 61010-2- 041 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-041: Particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes |
|
DS DS/EN 61010-2- 041/CORR. |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-041: Particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes |
|
DS DS/EN 61010-2- 043 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-043: Particular requirements for dry heat sterilizers using either hot air or hot inert gas for the treatment of medical materials, and for laboratory proce |
|
DS DS/EN 61010-2- 045 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-045: Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fields |
|
DS DS/EN 61010-2- 051 |
Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-051: Particular requirements for laboratory equipment for mixing and stirring |
|
DS DS/EN 61010-2- 061 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization |
|
DS DS/EN 61010-2- 081 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic analytical equipment for analysis and other purposes |
|
DS DS/EN 61010-2- 081/A1 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi- automatic laboratory equipment for analysis and other purposes-(AMENDS DS/EN 61010-2- 081) |
|
DS DS/EN 73 |
Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure |
|
DS DS/EN 73/AC |
Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure |
|
DS DS/EN 84 |
Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Leaching procedure |
|
DS DS/EN 878 |
Chemicals used for treatment of water intended for human consumption - Aluminium sulfate |
|
DS DS/EN 881 |
Chemicals used for treatment of water intended for human consumption Aluminium chloride (monomeric), aluminium chloride hydroxide (monomeric) and aluminium chloride hydroxide sulfate (monomeric) |
|
DS DS/EN 882 |
Chemicals used for treatment of water intended for human consumption - Sodium aluminate |
|
DS DS/EN 883 |
Chemicals used for treatment of water intended for human consumption - Polyaluminium chloride hydroxide and Polyaluminium chloride hydroxide sulfate |
|
DS DS/EN 885 |
Chemicals used for treatment of water intended for human consumption - Polyaluminium chloride hydroxide silicate |
|
DS DS/EN 886 |
Chemicals used for treatment of water intended for human consumption - Polyaluminium hydroxide silicate sulfate |
|
DS DS/EN 887 |
Chemicals used for treatment of water intended for human consumption - Aluminium iron(III) sulfate |
|
DS DS/EN 888 |
Chemicals used for treatment of water intended for human consumption - Iron(III) chloride |
|
DS DS/EN 889 |
Chemicals used for treatment of water intended for human consumption - Iron(II) sulfate |
|
DS DS/EN 890 |
Chemicals used for treatment of water intended for human consumption - Iron(III) sulfate |
|
DS DS/EN 891 |
Chemicals used for treatment of water intended for human consumption - Iron (III) chloride sulfate |
|
DS DS/EN 896 |
Chemicals used for treatment of water intended for human consumption - Sodium hydroxide |
|
DS DS/EN 897 |
Chemicals used for treatment of water intended for human consumption - Sodium carbonate |
|
DS DS/EN 898 |
Chemicals used for treatment of water intended for human comsumption - Sodium hydrogen carbonate |
|
DS DS/EN 899 |
Chemicals used for treatment of water intended for human consumption - Sulfuric acid |
|
DS DS/EN 900 |
Chemicals used for treatment of water intended for human consumption - Calcium hypochlorite |
|
DS DS/EN 901 |
Chemicals used for treatment of water intended for human consumption - Sodium hypochlorite |
|
DS DS/EN 902 |
Chemicals used for treatment of water intended for human consumption - Hydrogen peroxide |
|
DS DS/EN 935 |
Chemicals used for treatment of water intended for human consumption - Aluminium iron(III) chloride (monomeric) and aluminium iron(III) chloride hydroxide (monomeric) |
|
DS DS/EN 936 |
Chemicals used for treatment of water intended for human consumption - Carbon dioxide |
|
DS DS/EN 937 |
Chemicals used for treatment of water intended for human consumption - Chlorine |
|
DS DS/EN 938 |
Chemicals used for treatment of water intended for human consumption - Sodium chlorite |
|
DS DS/EN 939 |
Chemicals used for treatment of water intended for human consumption - Hydrochloric acid |
|
DS DS/EN 973 |
Chemicals used for treatment of water intended for human consumption - Sodium chloride for regeneration of ion exchangers |
|
DS DS/EN 973/A1 |
Chemicals used for treatment of water intended for human consumption - Sodium chloride for regeneration of ion exchangers-(AMENDS DS/EN 973) |
|
DS DS/EN 974 |
Chemicals used for treatment of water intended for human consumption - Phosphoric acid |
|
DS DS/EN ISO 10156- 2 |
Gas cylinders Gases and gas mixtures Part 2: Determination of oxidizing ability of toxic and corrosive gases and gas mixtures-:1997 |
|
DS DS/EN ISO 10439 |
Petroleum, chemical and gas service industries - Centrifugal compressors |
|
DS DS/EN ISO 10442 |
Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors |
|
DS DS/EN ISO 11609 |
Dentistry - Toothpastes - Requirements, test methods and marking |
|
DS DS/EN ISO 13709 |
Centrifugal pumps for petroleum, petrochemical and natural gas industries |
|
DS DS/EN ISO 21049 |
Pumps Shaft sealing systems for centrifugal and rotary pumps |
|
DS DS/EN ISO 2870 |
Surface active agents - Detergents - Determination of anionic-active matter hydrolyzable and non-hydrolyzable under acid conditions |
|
DS DS/EN ISO 2871- 1 |
Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter |
|
DS DS/EN ISO 2871- 2 |
Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) |
|
DS DS/EN ISO 3696 |
Water for analytical laboratory use - Specification and test methods |
|
DS DS/EN ISO 4142 |
Laboratory glassware - Test tubes |
|
DS DS/EN ISO 4796- 1 |
Laboratory glassware - Bottles - Part 1: Screw neck bottles |
|
DS DS/EN ISO 4796- 2 |
Laboratory glassware - Bottles - Part 2: Conical neck bottles |
|
DS DS/EN ISO 4796- 3 |
Laboratory glassware - Bottles - Part 3: Aspirator bottles |
|
DS DS/EN ISO 4797 |
Laboratory glassware Boiling flasks with conical ground joints |
|
DS DS/EN ISO 5771 |
Rubber hose and hose assemblies for transferring anhydrous ammonia - Specification |
|
DS DS/EN ISO 6845 |
Surface active agents - Technical alkane sulfonates - Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content |
|
DS DS/EN ISO 862 |
Surface active agents - Vocabulary - Trilingual version |
|
DS DS/EN ISO 8799 |
Surface active agents - Sulfated ethoxylated alcohols and alkylphenols - Determination of content of unsulfated matter |
|
DS DS/ENV 12404 |
Durability of wood and wood-based products - Assessment of the effectiveness of a masonry fungicide to prevent growth into wood of Dry Rot Serpula lacrymans (Schumacher ex Fries) S.F. Gray - Laboratory method |
|
DS DS/ENV 1250- 1 |
Wood preservatives - Methods for measuring losses of active ingredients and other preservative ingredients from treated timber - Part 1: Laboratory method for obtaining samples for analysis to measure losses by evaporation to air |
|
DS DS/ENV 1250- 2 |
Wood preservatives - Methods for measuring losses of active ingredients and other preservative ingredients from treated timber - Part 2: Laboratory method for obtaining samples for analysis to measure losses by leaching into water or synthetic sea water |
|
DS DS/ENV 1390 |
Wood preservatives - Determination of the eradicant action against Hylotrupes bajulus (Linnaeus) larvae - Laboratory method |
|
DS DS/ENV 807 |
Wood preservatives - Determination of the effectiveness against soft rotting micro-fungi and other soil inhabiting micro-organisms |
|
DS DS/ENV 839 |
Wood preservatives - Determination of the protective effectiveness against wood destroying basidiomycetes - Application by surface treatment |
|
DS DS/IEC/TR 61010- 3 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3: Protocol for the preparation of conformity verification reports for the IEC 61010 2nd edition series |
|
DS DS/IEC/TR 61010-3- 010 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-010: Conformity verification report for IEC 61010-2-010, Particular requirements for laboratory equipment for the heating of materials |
|
DS DS/IEC/TR 61010-3- 020 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-020: Conformity verification report for IEC 61010-2-020:1992, Particular requirements for laboratory centrifuges |
|
DS DS/IEC/TR 61010-3- 043 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-043: Conformity verification report for IEC 61010-2-043:1997, Particular requirements for dry heat sterilizers using either hot air or hot inert gas for the |
|
DS DS/IEC/TR 61010-3- 045 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-045: Conformity verification report for IEC 61010- 2-045:2000 - Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary |
|
DS DS/IEC/TR 61010-3- 051 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-051: Conformity verification report for IEC 61010-2-051, Particular requirements for laboratory equipment for mixing and stirring |
|
DS DS/IEC/TR 61010-3- 061 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-061: Conformity verification report for IEC 61010-2-061, Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization |
|
DS DS/IEC/TR 61010-3- 081 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes |
|
DS DS/IEC/TR 61010-3- 1 |
Safety requirements for electrical equipment for measurement, control, and laboratory use Part 3-1: Conformity verification report for IEC 61010-1:2001 General requirements-(CD Rom) |
|
DS DS/INF 143 |
Safety data sheets for chemical substances |
|
DS DS/INF 22- 31 |
Contents of certificates of reference materials |
|
DS DS/INF 463 |
Dansk Ingenioerforening´s code of practice for water treatment for laboratories |
|
DS DS/ISO 1392 |
Determination of crystallizing point - General method |
|
DS DS/ISO 14687 |
Hydrogen fuel Product specification-DS/ISO 14687/Corr.1 |
|
DS DS/ISO 2590 |
General method for the determination of arsenic - Silver diethyldithiocarbamate photometric method |
|
DS DS/ISO 5771/COR.1 |
Rubber hose and hose assemblies for transferring anhydrous ammonia - Specification |
|
DS DS/ISO 758 |
Liquid chemical products for industrial use - Determination of density at 20 Centigrades |
|
DS DS/ISO 78- 2 |
Chemistry - Layouts for standards - Part 2: Methods of chemical analysis |
|
DS DS/ISO 817 |
Organic refrigerants Designation system |
|
DS DS/ISO 8573- 1 |
Compressed air - Part 1: Contaminants and purity classes |
|
DS DS/ISO 8573- 2 |
Compressed air for general use - Part 2: Test methods for aerosol oil content |
|
DS DS/ISO 8573- 3 |
Compressed air - Part 3: Test methods for measurement of humidity |
|
DS DS/ISO 8573- 4 |
Compressed air - Part 4: Test methods for solid particle content |
|
DS DS/ISO 8573- 4/CORR.1 |
Compressed air - Part 4: Test methods for solid particle content |
|
DS DS/ISO 8573- 5 |
Compressed air - Part 5: Test methods for oil vapour and organic solvent content |
|
DS DS/ISO 8573- 6 |
Compressed air - Part 6: Test methods for gaseous contaminant content |
|
DS DS/ISO 8573- 7 |
Compressed air - Part 7: Test method for viable microbiological contaminant content |
|
DS DS/ISO 918 |
Volatile organic liquids for industrial use - Determination af distillation characteristics |