|
DS DS 1072 |
Floor depressions and frames for door mats and scrapers |
|
DS DS 2155 |
Material for towels (drill) for institutional use - Pure cotton |
|
DS DS 359 |
Woven wool fabrics for flags |
|
DS DS 71 |
Greys sheets for institutional use - Pure cotton |
|
DS DS 73 |
Drawsheet twill for institutional use - Pure cotton |
|
DS DS 74 |
Heavy greys for napkins and diapers for institutional use - Pure cotton |
|
DS DS 75 |
Material for towels (barleycorn) for institutional use - Pure cotton |
|
DS DS 76 |
Material for tickings for institutional use - Pure cotton |
|
DS DS 80 |
Material for dish towels for institutional use - Pure cotton |
|
DS DS 916 |
Textile testing - Determination of yarn number of manufactured yarn |
|
DS DS/CEN ISO/TS 17226 |
Leather - Chemical tests - Determination of formaldehyde content |
|
DS DS/CEN ISO/TS 17234 |
Leather - Chemical tests - Determination of certain azo colourants in dyed leathers |
|
DS DS/CEN/CR ISO 13434 |
Guidelines on durability of geotextiles and geotextile-related products |
|
DS DS/CEN/TS 14472- 1 |
Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 1: General |
|
DS DS/CEN/TS 14472- 2 |
Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 2: Textile floor coverings |
|
DS DS/CEN/TS 14494 |
Leather - Chemical tests - Determination of the content of pentachlorophenol in leather |
|
DS DS/CEN/TS 14495 |
Leather - Chemical tests - Determination of chromium VI content |
|
DS DS/CEN/TS 14906 |
Leather - Upholstery leather characteristics - Guide for the selection of leather for automotive |
|
DS DS/EN 1035 |
Tannery machines - Moving platen machinery - Safety requirements |
|
DS DS/EN 1035/AC |
Tannery machines - Moving platen machinery - Safety requirements |
|
DS DS/EN 1049- 2 |
Textiles - Woven Fabrics - Construction - Methods of analysis - Part 2: Determination of number of threads per unit length |
|
DS DS/EN 1101 |
Textiles and textiles products - Burning behaviour - Curtains and drapes - Detailed procedure to determine the ignitability of vertically oriented specimens (small flame)-Amendment 1:6/28/2005 |
|
DS DS/EN 1102 |
Textiles and textile products - Burning behaviour - Curtains and drapes - Detailed procedure to determine the flame spread of vertically oriented specimens |
|
DS DS/EN 1103 |
Textiles - Burning behaviour - Fabrics for apparel - Detailed procedure to determine the burning behaviour of fabrics for apparel |
|
DS DS/EN 1161 |
Feather and down - Test methods - Determination of moisture content |
|
DS DS/EN 1162 |
Feather and down - Test methods - Determination of the oxygen index number |
|
DS DS/EN 1163 |
Feather and down - Test methods - Determination of the oil and fat content |
|
DS DS/EN 1164 |
Feather and down - Test methods - Determination of the turbidity of an aqueous extract |
|
DS DS/EN 1165 |
Feather and down - Test methods - Determination of water-soluble chlorides |
|
DS DS/EN 12044 |
Footwear, leather and imitation leather goods manufacturing machines Cutting and punching machines Safety requirements |
|
DS DS/EN 12127 |
Textiles - Fabrics - Determination of mass per unit area using small samples |
|
DS DS/EN 12130 |
Feather and down - Test methods - Determination of the filling power (massic volume) |
|
DS DS/EN 12131 |
Feather and down - Test methods - Determination of the quantitative composition of feather and down (manual method) |
|
DS DS/EN 12132- 1 |
Feather and down - Methods of testing the down proof properties of fabrics - Part 1: Rubbing test |
|
DS DS/EN 12132- 2 |
Feather and down - Methods of testing the down proof properties of fabrics - Part 2: Impact test |
|
DS DS/EN 12132- 2/A1 |
Feather and down - Methods of testing the down proof properties of fabrics - Part 2: Impact test-(AMENDS DS/EN 12132-2) |
|
DS DS/EN 12203 |
Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements |
|
DS DS/EN 12224 |
Geotextiles and geotextile-related products - Determination of the resistance to weathering |
|
DS DS/EN 12225 |
Geotextiles and geotextile-related products - Method for determining the microbiological resistance by a soil burial test |
|
DS DS/EN 12226 |
Geotextiles and geotextile-related products - General tests for evaluation following durability testing |
|
DS DS/EN 12280- 1 |
Rubber- or plastics-coated fabrics - Accelerated ageing tests - Part 1: Heat ageing |
|
DS DS/EN 12280- 2 |
Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 2: Physical ageing: effect of light or weathering |
|
DS DS/EN 12280- 3 |
Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing |
|
DS DS/EN 12332- 1 |
Rubber- or plastic-coated fabrics - Determination of bursting strength - Part 1: Steel ball method |
|
DS DS/EN 12332- 2 |
Rubber- or plastic-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method |
|
DS DS/EN 12422 |
Sisal twines |
|
DS DS/EN 12423 |
Polypropylene twines |
|
DS DS/EN 12447 |
Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water |
|
DS DS/EN 12545 |
Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements |
|
DS DS/EN 12562 |
Textiles - Para-aramid multifilament yarns - Test methods |
|
DS DS/EN 12590 |
Textiles - Industrial sewing threads made wholly or partly from synthetic fibres |
|
DS DS/EN 1261 |
Fibre ropes for general service - Hemp |
|
DS DS/EN 12654- 1 |
Textile glass - Yarns - Part 1: Designation |
|
DS DS/EN 12654- 2 |
Textile glass - Yarns - Part 2: Methods of test and general specifications |
|
DS DS/EN 12654- 3 |
Textile glass - Yarns - Part 3: General requirements for general applications |
|
DS DS/EN 1269 |
Textile floor coverings - Assessment of impregnations in needled floor coverings by means of a soiling test |
|
DS DS/EN 12751 |
Textiles - Sampling of fibres, yarns and fabrics for testing |
|
DS DS/EN 12759 |
Rubber- or plastic-coated fabrics - Determination of resistence to liquids |
|
DS DS/EN 12934 |
Feather and down - Composition labelling of processed feathers and down for use as sole filling material |
|
DS DS/EN 12935 |
Feather and down - Hygiene and cleanliness requirements |
|
DS DS/EN 12971- 1 |
Reinforcements - Specification for textile glass chopped strands - Part 1: Designation |
|
DS DS/EN 12971- 2 |
Reinforcements - Specification for textile glass chopped strands - Part 2: Test methods and general requirements |
|
DS DS/EN 12971- 3 |
Reinforcements - Specification for textile glass chopped strands - Part 3: Specific requirements |
|
DS DS/EN 13002- 2 |
Carbon fibre yarns - Part 2: Methods of test and general specifications |
|
DS DS/EN 13003- 1 |
Para-aramid fibre filament yarns - Part 1: Designation |
|
DS DS/EN 13003- 2 |
Para-aramid fibre filament yarns - Part 2: Methods of test and general specifications |
|
DS DS/EN 13003- 3 |
Para-aramid fibre filament yarns - Part 3: Technical specifications |
|
DS DS/EN 1307 |
Textile floor coverings Classification of pile carpet |
|
DS DS/EN 13088 |
Manufactured articles filled with feather and down - Method for the determination of a filled product´s total mass and of the mass of the filling |
|
DS DS/EN 13112 |
Tannery machines - Splitting and bandknife shearing machines - Safety requirements |
|
DS DS/EN 13113 |
Tannery machines - Roller coating machines - Safety requirements |
|
DS DS/EN 13114 |
Tannery machines - Rotating process vessels - Safety requirements |
|
DS DS/EN 1318 |
Textile floor coverings - Determination of the apparent effective thickness of the backing |
|
DS DS/EN 13249 |
Geotextiles and geotextile-related products - Required characteristics for use in the construction of roads and other trafficked areas-Amendment 1: 03/17/2005 |
|
DS DS/EN 13250 |
Geotextiles and geotextile-related products - Required characteristics for use in the construction of railways-Amendment 1: 03/17/2005 |
|
DS DS/EN 13251 |
Geotextiles and geotextile-related products - Required characteristics for use in earthworks, foundations and retaining structures-Amendment 1: 03/04/2005 |
|
DS DS/EN 13252 |
Geotextiles and geotextile-related products - Required characteristics for use in drainage systems-Amendment 1: 03/04/2005 |
|
DS DS/EN 13253 |
Geotextiles and geotextile-related products - Required characteristics for use in erosion control systems-Amendment 1: 03/04/2005 |
|
DS DS/EN 13254 |
Geotextiles and geotextile-related products - Required characteristics for use in the construction of reservoirs and dams-AC: 12/17/2003; Amendment 1: 04/04/2005 |
|
DS DS/EN 13255 |
Geotextiles and geotextile-related products - Required characteristics for use in the construction of canals-AC: 12/17/2003; Amendment 1: 04/04/2005 |
|
DS DS/EN 13256 |
Geotextiles and geotextile-related products - Required characteristics for use in the construction of tunnels and underground structures-AC: 12/17/2003; Amendment 1: 04/04/2005 |
|
DS DS/EN 13257 |
Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals-AC: 11/27/2003; Amendment 1: 04/04/2005 |
|
DS DS/EN 13265 |
Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects-AC:12/17/2003; Amendment 1:04/04/2005 |
|
DS DS/EN 13297 |
Textile floor coverings - Classification of needled pile floor coverings |
|
DS DS/EN 13335 |
Leather - Physical and mechanical tests - Determination of flex resistance by vamp flex method |
|
DS DS/EN 13336 |
Leather - Upholstery leather characteristics - Guide for selection of leather for funiture |
|
DS DS/EN 13360 |
Rubber- or plastics-coated fabrics - Terminology |
|
DS DS/EN 13392 |
Textiles - Monofilaments - Determination of linear density |
|
DS DS/EN 13417- 1 |
Reinforcement - Specifications for woven fabrics - Part 1: Designation |
|
DS DS/EN 13417- 2 |
Reinforcement - Specifications for woven fabrics - Part 2: Methods of test and general requirements |
|
DS DS/EN 13417- 3 |
Reinforcement - Specifications for woven fabrics - Part 3: Specific requirements |
|
DS DS/EN 13457 |
Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements |
|
DS DS/EN 13473- 1 |
Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 1: Designation |
|
DS DS/EN 13473- 2 |
Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 2: Methods of test and general requirements |
|
DS DS/EN 13473- 3 |
Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 3: Specific requirements |
|
DS DS/EN 13536 |
Manufactured articles filled with feather and down - Requirements for clothing - Light use |
|
DS DS/EN 13540 |
Leather - Physical and mechanical tests - Determination of heat resistance of patent leather |
|
DS DS/EN 13542 |
Manufactured articles filled with feather and down - Method for determining the compressibility index of clothing |
|
DS DS/EN 13543 |
Manufactured articles filled with feather and down - Measurement of water absorption of filling material |
|
DS DS/EN 13562 |
Geotextiles and geotextile-related products - Determination of resistance to penetration by water (hydrostatic pressure test) |
|
DS DS/EN 13569 |
Cabinet roller towels - Performance requirements and processing |
|
DS DS/EN 13719 |
Geotextiles and geotextile-related products - Determination of the long term protection efficiency of geotextiles in contact with geosynthetic barriers-AC: 04/10/2005 |
|
DS DS/EN 13738 |
Geotextiles and geotextile-related products - Determination of pullout resistance in soil |
|
DS DS/EN 13758- 1 |
Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics |
|
DS DS/EN 13772 |
Textiles and textile products - Burning behaviour - Curtains and drapes - Measurement of flame spread of vertically oriented specimens with large ignition source |
|
DS DS/EN 13773 |
Textiles and textile products - Burning behaviour - Curtains and drapes - Classification scheme |
|
DS DS/EN 13844 |
Textiles - Monofilaments - Determination of thermal shrinkage |
|
DS DS/EN 13893 |
Resilient, laminate and textile floor coverings - Parameters for the measurement of dynamic coefficient of friction on dry floor surfaces |
|
DS DS/EN 13895 |
Textiles - Monofilaments - Determination of tensile properties |
|
DS DS/EN 14020- 1 |
Reinforcements - Specification for textile glass rovings - Part 1: Designation |
|
DS DS/EN 14020- 2 |
Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements |
|
DS DS/EN 14020- 3 |
Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements |
|
DS DS/EN 14030 |
Geotextiles and geotextile-related products - Screening test method for determining the resistance to acid and alkaline liquids |
|
DS DS/EN 14030/A1 |
Geotextiles and geotextile-related products - Screening test method for determining the resistance to acid and alkaline liquids-(AMENDS DS/EN 14030) |
|
DS DS/EN 14041 |
Resilient, textile and laminate floor coverings - Essential characteristics-AC: 08/24/2005 |
|
DS DS/EN 14065 |
Textiles - Laundry processed textiles - Biocontamination control system |
|
DS DS/EN 14115 |
Textiles - Burning behaviour of materials for marquees, large tents and related products - Ease of ignition |
|
DS DS/EN 14118- 1 |
Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 1: Designation |
|
DS DS/EN 14118- 2 |
Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 2: Methods of test and general requirements |
|
DS DS/EN 14118- 3 |
Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 3: Specific requirements |
|
DS DS/EN 14119 |
Testing of textiles - Evaluation of the action of microfungi |
|
DS DS/EN 1413 |
Textiles - Determination of pH of aqueous extract |
|
DS DS/EN 14215 |
Textile floor coverings - Classification of machine-made pile rugs and runners |
|
DS DS/EN 14237 |
Leather - Physical and mechanical tests - Determination of abrasion resistance of automotive leather |
|
DS DS/EN 14259 |
Adhesives for floor coverings - Requirements for mechanical and electrical performance |
|
DS DS/EN 14278- 1 |
Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device |
|
DS DS/EN 14278- 2 |
Textiles - Determination of cotton fibre stickiness - Part 2: Method using an automatic thermodection plate device |
|
DS DS/EN 14278- 3 |
Textiles - Determination of cotton fibre stickiness - Part 3: Method using an automatic thermodetection rotating drum device |
|
DS DS/EN 14288 |
Leather - Physical and mechanical tests - Determination of fogging characteristics |
|
DS DS/EN 14289 |
Leather - Physical and mechanical tests - Determination of water penetration pressure |
|
DS DS/EN 14326 |
Leather - Physical and mechanical tests - Determination of resistance to horizontal spread of flame |
|
DS DS/EN 14340 |
Leather - Physical and mechanical tests - Determination of water repellancy of garment leather |
|
DS DS/EN 14362- 1 |
Textiles - Methods for the determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible without extraction-AC: 04/05/2005 |
|
DS DS/EN 14362- 2 |
Textiles - Methods for the determination of certain aromatic amines derived from azo colorants - Part 2: Detection of the use of certain azo colorants accessible by extracting the fibres-AC: 04/05/2005 |
|
DS DS/EN 14414 |
Geosynthetics - Screening test method for the determining chemical resistance for landfill applications |
|
DS DS/EN 14415 |
Geosynthetic barriers - Test method for determining the resistance to leaching |
|
DS DS/EN 14465 |
Textiles - Upholstery fabrics - Specification and methods of test |
|
DS DS/EN 14574 |
Geosynthetics Determination of the pyramid puncture resistance of supported geosynthetics |
|
DS DS/EN 14575 |
Geosynthetic barriers Screening test method for determining the resistance to oxidation |
|
DS DS/EN 14576 |
Geosynthetics Test method for determining the resistance of polymeric geosynthetic barriers to environmental stress cracking |
|
DS DS/EN 14684 |
Polyester fibre ropes - Double braid construction |
|
DS DS/EN 14685 |
Polyamide fibre ropes - Double braid construction |
|
DS DS/EN 14686 |
Fibre ropes of polyester/polyolefin dual fibre |
|
DS DS/EN 14687 |
Mixed polyolefin fibre ropes |
|
DS DS/EN 1470 |
Textile floor coverings - Classification of needled floor coverings except for needled pile floor coverings |
|
DS DS/EN 1470/RET.1 |
Textile floor coverings - Classification of needled floor coverings except for needled pile floor coverings |
|
DS DS/EN 1471 |
Textile floor coverings - Assessment of changes in appearance |
|
DS DS/EN 1471/A1 |
Textile floor coverings - Assessment of changes in appearance- (AMENDS DS/EN 1471) |
|
DS DS/EN 14882 |
Rubber or plastic coated fabrics Determination of the static and dynamic coefficient of friction |
|
DS DS/EN 1624 |
Textiles and textile products - Burning behaviour of industrial and technical textiles - Procedure to determine the flame spread of vertically oriented specimens |
|
DS DS/EN 1625 |
Textiles and textile products - Burning behaviour of industrial and technical textiles - Procedure to determine the ignitability of vertically oriented specimens |
|
DS DS/EN 1734 |
Rubber- or plastics-coated fabrics - Determination of resistance to water penetration - Low-pressure method |
|
DS DS/EN 1735 |
Rubber- or plastics-coated fabrics - Determination of flexibility |
|
DS DS/EN 1773 |
Textiles - Fabrics - Determination of width and length |
|
DS DS/EN 1813 |
Textile floor coverings - Determination of wool fibre integrity using an abrasion machine |
|
DS DS/EN 1814 |
Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test |
|
DS DS/EN 1815 |
Resilient and textile floor coverings - Assessment of static electrical propensity |
|
DS DS/EN 1875- 3 |
Rubber- or plastics-coated fabrics - Determination of tear strength - Part 3: Trapezoidal method |
|
DS DS/EN 1876- 1 |
Rubber- or plastics-coated fabrics - Low-temperature tests - Part 1: Bending test |
|
DS DS/EN 1876- 2 |
Rubber- or plastics-coated fabrics - Low temperature tests - Part 2: Impact test on loop |
|
DS DS/EN 1882 |
Feather and down - Test methods - Determination of the commercial mass of a lot of feather and down |
|
DS DS/EN 1883 |
Feather and down - Sampling in view of tests |
|
DS DS/EN 1884 |
Feather and down - Test methods - Determination of microbiological state |
|
DS DS/EN 1885 |
Feather and down - Terms and definitions |
|
DS DS/EN 1885/A1 |
Feather and down - Terms and definitions-(AMENDS DS/EN 1885) |
|
DS DS/EN 1897 |
Geotextiles and geotextile-related products - Determination of the compressive creep properties |
|
DS DS/EN 1963 |
Textile floor coverings - Tests using the Lisson Tretrad machine |
|
DS DS/EN 20105- A02 |
Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour |
|
DS DS/EN 20105- A03 |
Textiles - Tests for colour fastness - Part A03: Grey scale for assessing staining |
|
DS DS/EN 20105- C01 |
Textiles - Tests for colour fastness - Part C01: Colour fastness to washing: Test 1 |
|
DS DS/EN 20105- C02 |
Textiles - Tests for colour fastness - Part C02: Colour fastness to washing: Test 2 |
|
DS DS/EN 20105- C03 |
Textiles - Tests for colour fastness - Part C03: Colour fastness to washing: Test 3 |
|
DS DS/EN 20105- C04 |
Textiles - Tests for colour fastness - Part C04: Colour fastness to washing - Test 4 |
|
DS DS/EN 20105- C05 |
Textiles - Tests for colour fastness - Part C05: Colour fastness to washing: Test 5 |
|
DS DS/EN 20105- N01 |
Textiles - Tests for colour fastness - Part N01: Colour fastness to bleaching: Hypochlorite |
|
DS DS/EN 20139 |
Textiles - Standard atmospheres for conditioning and testing |
|
DS DS/EN 20811 |
Textiles - Determination of resistance to water penetration - Hydrostatic pressure test |
|
DS DS/EN 22313 |
Textile fabrics - Determination of the recovery from creasing of a horizontally folded specimen by measuring the angle of recovery |
|
DS DS/EN 23758 |
Textiles - Care labelling code using symbols |
|
DS DS/EN 24920 |
Textiles - Determination of resistance to surface wetting (spray test) of fabrics |
|
DS DS/EN 25077 |
Textiles - Determination of dimensional change in washing and drying |
|
DS DS/EN 25978 |
Rubber- or plactics-coated fabrics - Determination of blocking resistance |
|
DS DS/EN 29073- 1 |
Textiles - Test methods for nonwoven - Part 1: Determination of mass per unit area |
|
DS DS/EN 29073- 3 |
Textiles - Test methods for nonwovens. Part 3: Determination of tensile strength and elongation |
|
DS DS/EN 29092 |
Textiles - Nonwovens - Definition |
|
DS DS/EN 29865 |
Textiles - Determination of water repellency of fabrics by the Bundesmann rain-shower test |
|
DS DS/EN 31092 |
Textiles - Determination of physiological properties - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded - hotplate test) |
|
DS DS/EN 61340-4- 1 |
Electrostatics Part 4-1: Standard test methods for specific applications Electrical resistance of floor coverings and installed floors |
|
DS DS/EN 685 |
Resilient, textile and laminate floor coveri |
|
DS DS/EN 696 |
Fibre ropes for general service - Polyamide |
|
DS DS/EN 697 |
Fibre ropes for general service - Polyester |
|
DS DS/EN 698 |
Fibre ropes for general service - Manila and sisal |
|
DS DS/EN 699 |
Fibre ropes for general service - Polypropylene |
|
DS DS/EN 700 |
Fibre ropes for general service - Polyethylene |
|
DS DS/EN 701 |
Fibre ropes for general service - General specification |
|
DS DS/EN 906 |
Polyolefin agricultural twines |
|
DS DS/EN 918 |
Geotextiles and geotextile-related products - Dynamic perforation test (cone drop test) |
|
DS DS/EN 919 |
Fibre ropes for general service - Determination of certain physical and mechanical properties |
|
DS DS/EN 930 |
Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements |
|
DS DS/EN 930/A1 |
Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements- (AMENDS DS/EN 930) |
|
DS DS/EN 963 |
Geotextiles and geotextile-related products - Sampling and preparation of test specimens |
|
DS DS/EN 964- 1 |
Geotextiles and geotextile-related products - Determination of thickness at specified pressures - Part 1: single layers |
|
DS DS/EN 965 |
Geotextiles and geotextile-related products - Determination of mass per unit area |
|
DS DS/EN 972 |
Tannery machines - Reciprocating roller machines - Safety requirements |
|
DS DS/EN 984 |
Textile floor coverings - Determination of the mass per unit area of the use surface of needled floor coverings |
|
DS DS/EN 985 |
Textile floor coverings - Castor chair test |
|
DS DS/EN 986 |
Textile floor coverings - Tiles - Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane |
|
DS DS/EN 994 |
Textile floor coverings - Determination of the side length, squareness and straightness of tiles |
|
DS DS/EN 995 |
Textile floor coverings - Assessment of the creep of the backings |
|
DS DS/EN ISO 10306 |
Textiles - Cotton fibres - Evaluation of maturity by the air flow method |
|
DS DS/EN ISO 10318 |
Geosynthetics Terms and definitions |
|
DS DS/EN ISO 10319 |
Geotextiles - Wide-width tensile test |
|
DS DS/EN ISO 10320 |
Geotextiles and geotextile-related products - Identification on site |
|
DS DS/EN ISO 10321 |
Geotextiles - Tensile test for joints/seams by wide-width method |
|
DS DS/EN ISO 1043- 2 |
Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials |
|
DS DS/EN ISO 10528 |
Textiles - Commercial laundering procedure for textile fabrics prior to flammability testing |
|
DS DS/EN ISO 10548 |
Carbon fibre - Determination of size content |
|
DS DS/EN ISO 105- A01 |
Textiles - Tests for colour fastness - Part A01: General principles of testing |
|
DS DS/EN ISO 105- A04 |
Textiles - Tests for colour fastness - Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics |
|
DS DS/EN ISO 105- A05 |
Textiles - Tests for colour fastness - Part A05: Instrumental assessment of change in colour for determination of grey scale rating |
|
DS DS/EN ISO 105- A06 |
Textiles - Tests for colour fastness - Part A06: Instrumental determination of 1/1 standard depth of colour |
|
DS DS/EN ISO 105- A08 |
Textiles - Tests for colour fastness - Part A08: Vocabulary used in colour measurement |
|
DS DS/EN ISO 105- B01 |
Textiles - Tests for colour fastness - Part B01: Colour fastness to light: Daylight |
|
DS DS/EN ISO 105- B02 |
Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
|
DS DS/EN ISO 105- B02/A1 |
Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test-(AMENDS DS/EN ISO 105-B02) |
|
DS DS/EN ISO 105- B03 |
Textiles - Tests for colour fastness - Part B03: Colour fastness to weathering: Outdoor exposure |
|
DS DS/EN ISO 105- B04 |
Textiles - Tests for colour fastness - Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test |
|
DS DS/EN ISO 105- B05 |
Textiles - Tests for colour fastness - Part B05: Detection and assessment of photochromism |
|
DS DS/EN ISO 105- B06 |
Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test |
|
DS DS/EN ISO 105- B08 |
Textiles - Tests for colour fastness - Part B08: Quality control of blue wool reference materials 1 to 7 |
|
DS DS/EN ISO 105- C06 |
Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering |
|
DS DS/EN ISO 105- C07 |
Textiles - Tests for colour fastness - Part C07: Colour fastness to wet scrubbing of pigment printed textiles |
|
DS DS/EN ISO 105- C08 |
Textiles - Tests for colour fastness - Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator |
|
DS DS/EN ISO 105- C09 |
Textiles - Tests for colour fastness - Part C09: Colour fastness to domestic and commercial laundering - Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator |
|
DS DS/EN ISO 105- D01 |
Textiles - Tests for colour fastness - Part D01: Colour fastness to dry cleaning |
|
DS DS/EN ISO 105- D02 |
Textiles - Tests for colour fastness - Part D02: Colour fastness to rubbing: Organic solvents |
|
DS DS/EN ISO 105- E01 |
Textiles - Tests for colour fastness - Part E01: Colour fastness to water |
|
DS DS/EN ISO 105- E02 |
Textiles - Tests for colour fastness - Part E02: Colour fastness to sea water |
|
DS DS/EN ISO 105- E03 |
Textiles - Tests for colour fastness - Part E03: Colour fastness to chlorinated water (swimming-pool water) |
|
DS DS/EN ISO 105- E04 |
Textiles - Test for colour fastness - Part E04: Colour fastness to perspiration |
|
DS DS/EN ISO 105- E05 |
Textiles - Tests for colour fastness - Part E05: Colour fastness to spotting: Acid |
|
DS DS/EN ISO 105- E06 |
Textiles - Tests for colour fastness - Part E06: Colour fastness to spotting: Alkali |
|
DS DS/EN ISO 105- E07 |
Textiles - Tests for colour fastness - Part E07: Colour fastness to spotting: Water |
|
DS DS/EN ISO 105- E08 |
Textiles - Tests for colour fastness - Part E08: Colour fastness to hot water |
|
DS DS/EN ISO 105- E09 |
Textiles - Tests for colour fastness - Part E09: Colour fastness to potting |
|
DS DS/EN ISO 105- E10 |
Textiles - Tests for colour fastness - Part E10: Colour fastness to decatizing |
|
DS DS/EN ISO 105- E11 |
Textiles - Tests for colour fastness - Part E11: Colour fastness to steaming |
|
DS DS/EN ISO 105- E12 |
Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: alkaline milling |
|
DS DS/EN ISO 105- E12/A1 |
Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: Alkaline milling-(AMENDS DS/EN ISO 105-E12) |
|
DS DS/EN ISO 105- E13 |
Textiles - Tests for colour fastness - Part E13: Colour fastness to acid- felting: Severe |
|
DS DS/EN ISO 105- E13/COR.1 |
Textiles - Tests for colour fastness - Part E13: Colour fastness to acid-felting: Severe |
|
DS DS/EN ISO 105- E14 |
Textiles - Tests for colour fastness - Part E14: Colour fastness to acid- feltning: Mild |
|
DS DS/EN ISO 105-G01 + AC |
Textiles - Tests for colour fastness - Part G01: Colour fastness to nitrogen oxides |
|
DS DS/EN ISO 105- G02 |
Textiles - Tests for colour fastness - Part G02: Colour fastness to burnt-gas fumes |
|
DS DS/EN ISO 105- G03 |
Textiles - Tests for colour fastness - Part G03: Colour fastness to ozone in the atmosphere |
|
DS DS/EN ISO 105- J01 |
Textiles - Tests for colour fastness - Part JO1: General principles for measurement of surface colour |
|
DS DS/EN ISO 105- J02 |
Textiles - Tests for colour fastness - Part JO2: Instrumental assessment of relative whiteness |
|
DS DS/EN ISO 105- J03 |
Textiles - Tests for colour fastness - Part J03: Calculation of colour differences |
|
DS DS/EN ISO 105- N02 |
Textiles - Tests for colour fastness - Part N02: Colour fastness to bleaching - Peroxide |
|
DS DS/EN ISO 105- N03 |
Textiles - Tests for colour fastness - Part N03: Colour fastness to bleaching: Sodium chlorite (mild) |
|
DS DS/EN ISO 105- N04 |
Textiles - Tests for colour fastness - Part N04: Colour fastness to bleaching: Sodium chlorite (severe) |
|
DS DS/EN ISO 105- N05 |
Textiles - Tests for colour fastness - Part N05: Colour fastness to stoving |
|
DS DS/EN ISO 105- P01 |
Textiles - Tests for colour fastness - Part P01: Colour fastness to dry heat (excluding pressing) |
|
DS DS/EN ISO 105- P02 |
Textiles - Tests for colour fastness - Part P02: Colour fastness to pleating: Steam pleating |
|
DS DS/EN ISO 105- P02/COR.1 |
Textiles - Tests for colour fastness - Part P02: Colour fastness to pleating: Steam pleating |
|
DS DS/EN ISO 105- S01 |
Textiles - Tests for colour fastness - Part S01: Colour fastness to vulcanization: Hot air |
|
DS DS/EN ISO 105- S02 |
Textiles - Tests for colour fastness - Part S02: Colour fastness to vulcanizing: Sulphur monochloride |
|
DS DS/EN ISO 105- S03 |
Textiles - Tests for colour fastness - Part S03: Colour fastness to vulcanization: Open steam |
|
DS DS/EN ISO 105- X01 |
Textiles - Tests for colour fastness - Part X01: Colour fastness to carbonizing: Aluminium chloride |
|
DS DS/EN ISO 105- X02 |
Textiles - Tests for colour fastness - Part X02: Colour fastness to carbonizing: Sulphuric acid |
|
DS DS/EN ISO 105- X04 |
Textiles - Tests for colour fastness - Part X04: Colour fastness to mercerizing |
|
DS DS/EN ISO 105- X05 |
Textiles - Tests for colour fastness - Part X05: Colour fastness to organic solvents |
|
DS DS/EN ISO 105- X06 |
Textiles - Tests for colour fastness - Part X06: Colour fastness to soda boiling |
|
DS DS/EN ISO 105- X07 |
Textiles - Tests for colour fastness - Part X07: Colour fastness to cross-dyeing: Wool |
|
DS DS/EN ISO 105- X08 |
Textiles - Tests for colour fastness - Part X08: Colour fastness to degumming |
|
DS DS/EN ISO 105- X09 |
Textiles - Tests for colour fastness - Part X09: Colour fastness to formaldehyde |
|
DS DS/EN ISO 105- X10 |
Textiles - Tests for colour fastness - Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings |
|
DS DS/EN ISO 105- X11 |
Textiles - Test for colour fastness - Part X11: Colour fastness to hot pressing |
|
DS DS/EN ISO 105- X12 |
Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing |
|
DS DS/EN ISO 105- X13 |
Textiles - Tests for colour fastness - Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting |
|
DS DS/EN ISO 105- X14 |
Textiles - Tests for colour fastness - Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate |
|
DS DS/EN ISO 105- X16 |
Textiles - Tests for colour fastness - Part X16: Colour fastness to rubbing - Small areas |
|
DS DS/EN ISO 105- Z03 |
Textiles - Tests for colour fastness - Part Z03: Intercompatibility of basic dyes for acrylic fibres |
|
DS DS/EN ISO 105- Z04 |
Textiles - Tests for colour fastness - Part Z04: Dispersibility of disperse dyes |
|
DS DS/EN ISO 105- Z05 |
Textiles - Tests for colour fastness - Part Z05: Determination of the dusting behaviour of dyes |
|
DS DS/EN ISO 105- Z06 |
Textiles - Tests for colour fastness - Part Z06: Evaluation of dye and pigment migration |
|
DS DS/EN ISO 105- Z07 |
Textiles - Tests for colour afstness - Part Z07: Determination of application solubility and solution stability of water-soluble dyes |
|
DS DS/EN ISO 105- Z08 |
Textiles - Tests for colour fastness - Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes |
|
DS DS/EN ISO 105- Z09 |
Textiles - Tests for colour fastness - Part Z09: Determination of cold water solubility of water-soluble dyes |
|
DS DS/EN ISO 105- Z10 |
Textiles - Tests for colour fastness - Part Z10: Determination of relative colour strength of dyes in solution |
|
DS DS/EN ISO 105- Z11 |
Textiles - Tests for colour fastness - Part Z11: Evaluation of speckiness of colorant dispersions |
|
DS DS/EN ISO 10618 |
Carbon fibre - Determination of tensile properties of resin- impregnated yarn |
|
DS DS/EN ISO 11058 |
Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load |
|
DS DS/EN ISO 11111 |
Safety requirements for textile machinery |
|
DS DS/EN ISO 11111- 1 |
Textile machinery Safety requirements Part 1: Common requirements |
|
DS DS/EN ISO 11111- 2 |
Textile machinery Safety requirements Part 2: Spinning preparatory and spinning machines |
|
DS DS/EN ISO 11111- 3 |
Textile machinery Safety requirements Part 3: Nonwoven machinery |
|
DS DS/EN ISO 11111- 4 |
Textile machinery Safety requirements Part 4: Yarn processing, cordage and rope manufacturing machinery |
|
DS DS/EN ISO 11111- 5 |
Textile machinery Safety requirements Part 5: Preparatory machinery to weaving and knitting |
|
DS DS/EN ISO 11111- 6 |
Textile machinery Safety requirements Part 6: Fabric manufacturing machinery |
|
DS DS/EN ISO 11111- 7 |
Textile machinery Safety requirements Part 7: Dyeing and finishing machinery |
|
DS DS/EN ISO 11378- 2 |
Textile floor coverings - Laboratory soiling tests - Part 2: Drum test |
|
DS DS/EN ISO 11640 |
Leather - Tests for colour fastness - Colour fastness to cycles of to- and-fro rubbing |
|
DS DS/EN ISO 11641 |
Leather - Test for colour fastness - Colour fastness to perspiration |
|
DS DS/EN ISO 11642 |
Leather - Tests for colour fastness - Colour fastness to water |
|
DS DS/EN ISO 11643 |
Leather - Tests for colour fastness - Colour fastness of small samples to dry-cleaning solutions |
|
DS DS/EN ISO 11644 |
Leather - Test for adhesion of finish |
|
DS DS/EN ISO 11646 |
Leather - Measurement of area |
|
DS DS/EN ISO 11721- 1 |
Textiles - Determination of resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Part 1: Assessment of rot-retardant finishing |
|
DS DS/EN ISO 11721- 2 |
Textiles - Determination of the resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Part 2: Identification of long-term resistance of a rot retardant finish |
|
DS DS/EN ISO 11857 |
Textile floor coverings - Determination of resistance to delamination |
|
DS DS/EN ISO 12138 |
Textiles - Domestic laundering procedures for textile fabrics prior to flammability testing |
|
DS DS/EN ISO 12236 |
Geotextiles and geotextile-related products - Static puncture test (CBR-Test) |
|
DS DS/EN ISO 12945- 1 |
Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 1: Pilling box method |
|
DS DS/EN ISO 12945- 2 |
Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method |
|
DS DS/EN ISO 12947- 1 |
Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 1: Martindale abrasion testing apparatus |
|
DS DS/EN ISO 12947- 2 |
Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown |
|
DS DS/EN ISO 12947- 3 |
Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss |
|
DS DS/EN ISO 12947- 4 |
Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change |
|
DS DS/EN ISO 12956 |
Geotextiles and geotextile-related products - Determination of the characteristic opening size |
|
DS DS/EN ISO 12958 |
Geotextiles and geotextile-related products - Determination of water flow capacity in their plane |
|
DS DS/EN ISO 13002 |
Carbon fibre - Designation system for filament yarns |
|
DS DS/EN ISO 13246- 1 |
Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 1: Geocells |
|
DS DS/EN ISO 13426- 2 |
Geotextiles and geotextile-related products Strength of internal structural junctions Part 2: Geocomposites |
|
DS DS/EN ISO 13427 |
Geotextiles and geotextile-related products - Abrasion damage simulation (sliding block test) |
|
DS DS/EN ISO 13431 |
Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour |
|
DS DS/EN ISO 13437 |
Geotextiles and geotextile-related products - Method for installing and extracting samples in soil, and testing specimens in laboratory |
|
DS DS/EN ISO 13438 |
Geotextiles and geotextile-related products - Screening test method for determining the resistance to oxidation |
|
DS DS/EN ISO 139 |
Textiles Standard atmospheres for conditioning and testing |
|
DS DS/EN ISO 13934- 1 |
Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method |
|
DS DS/EN ISO 13934- 2 |
Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method |
|
DS DS/EN ISO 13935- 1 |
Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method |
|
DS DS/EN ISO 13935- 2 |
Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method |
|
DS DS/EN ISO 13936- 1 |
Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 1: Fixed seam opening method |
|
DS DS/EN ISO 13936- 2 |
Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 2: Fixed load method |
|
DS DS/EN ISO 13937- 1 |
Textiles - Tear properties of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) |
|
DS DS/EN ISO 13937- 2 |
Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method) |
|
DS DS/EN ISO 13937- 3 |
Textiles - Tear properties of fabrics - Part 3: Determination of tear force of wing shaped test specimens (Single tear method) |
|
DS DS/EN ISO 13937- 4 |
Textiles - Tear properties of fabrics - Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test) |
|
DS DS/EN ISO 13938- 1 |
Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension |
|
DS DS/EN ISO 13938- 2 |
Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension |
|
DS DS/EN ISO 14184- 1 |
Textiles - Determination of formaldehyde - Part 1: Free and hydrolyzed formaldehyde (water extraction method) |
|
DS DS/EN ISO 14184- 2 |
Textiles - Determination of formaldehyde - Part 2: Released formaldehyde (vapour absorption method) |
|
DS DS/EN ISO 1421 |
Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break |
|
DS DS/EN ISO 14268 |
Leather - Physical and mechanical tests - Determination of water vapour permeability |
|
DS DS/EN ISO 14419 |
Textiles - Oil repellency - Hydrocarbon resistance test |
|
DS DS/EN ISO 14931 |
Leather Guide to the selection of leather for apparel (excluding furs) |
|
DS DS/EN ISO 15487 |
Textiles - Method for assessing appearance of apparel and other textile end products after domestic washing and drying |
|
DS DS/EN ISO 15496 |
Textiles - Measurement of water vapour permeability of textiles for the purpose of quality control |
|
DS DS/EN ISO 15700 |
Leather - Tests for colour fastness - Colour fastness to water spotting |
|
DS DS/EN ISO 15701 |
Leather - Tests for colour fastness - Colour fastness to migration into plasticized poly(vinyl chloride) |
|
DS DS/EN ISO 15702 |
Leather - Tests for colour fastness - Colour fastness to machine washing |
|
DS DS/EN ISO 15703 |
Leather - Tests for colour fastness - Colour fastness to mild washing |
|
DS DS/EN ISO 17186 |
Leather - Physical and mechanical tests - Determination of surface coating thickness |
|
DS DS/EN ISO 17227 |
Leather - Physical and mechanical tests - Determination of dry heat resistance of leather |
|
DS DS/EN ISO 17229 |
Leather - Physical and mechanical tests - Determination of water vapour absorption |
|
DS DS/EN ISO 17233 |
Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings |
|
DS DS/EN ISO 17235 |
Leather - Physical and mechanical tests - Determination of softness |
|
DS DS/EN ISO 17236 |
Leather - Physical and mechanical tests - Determination of extension set |
|
DS DS/EN ISO 1889 |
Reinforcement yarns - Determination of linear density |
|
DS DS/EN ISO 1890 |
Reinforcement yarns - Determination of twist |
|
DS DS/EN ISO 1968 |
Fibre ropes and cordage - Vocabulary |
|
DS DS/EN ISO 1973 |
Textile fibres - Determination of linear density - Gravimetric method and vibroscope method |
|
DS DS/EN ISO 2060 |
Textiles - Yarn from packages - Determination of linear density (mass per unit length) by the skein method |
|
DS DS/EN ISO 2061 |
Textiles - Determination of twist in yarns - Direct counting method |
|
DS DS/EN ISO 2062 |
Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break |
|
DS DS/EN ISO 2078 |
Textile glass - Yarns - Designation |
|
DS DS/EN ISO 2231 |
Rubber- or plastics-coated fabrics - Standard atmospheres for conditioning and testing |
|
DS DS/EN ISO 2286- 1 |
Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1: Methods for determination of the length, width and net mass |
|
DS DS/EN ISO 2286- 2 |
Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of the total mass per unit area, mass per unit area of coating and mass per unit area of substrate |
|
DS DS/EN ISO 2286- 3 |
Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness |
|
DS DS/EN ISO 2307 |
Fibre ropes Determination of certain physical and mechanical properties (ISO 2307:2005) |
|
DS DS/EN ISO 2411 |
Rubber- or plastics-coated fabrics - Determination of coating adhesion |
|
DS DS/EN ISO 2417 |
Leather - Physical and mechanical tests - Determination of the static absorption of water |
|
DS DS/EN ISO 2418 |
Leather - Chemical, physical and mechanical and fastness tests - Sampling location |
|
DS DS/EN ISO 2419 |
Leather - Physical and mechanical tests - Sample preparation and conditioning |
|
DS DS/EN ISO 2420 |
Leather - Physical and mechanical tests - Determination of apparent density |
|
DS DS/EN ISO 2589 |
Leather - Physical and mechanical tests - Determination of thickness |
|
DS DS/EN ISO 3175- 1 |
Textiles - Dry-cleaning and finishing - Part 1: Method for assessing the cleanability of textiles and garments |
|
DS DS/EN ISO 3175- 2 |
Textiles - Dry-cleaning and finishing - Part 2: Procedures for tetrachloroethene |
|
DS DS/EN ISO 3175- 3 |
Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvents |
|
DS DS/EN ISO 3175- 4 |
Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning |
|
DS DS/EN ISO 3344 |
Reinforcement products - Determination of moisture content |
|
DS DS/EN ISO 3376 |
Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension |
|
DS DS/EN ISO 3377- 1 |
Leather - Physical and mechanical tests - Determination of tear load - Part 1: Single edge tear |
|
DS DS/EN ISO 3377- 2 |
Leather - Physical and mechanical tests - Determination of tear load - Part 2: Double edge tear |
|
DS DS/EN ISO 3378 |
Leather - Physical and mechanical tests - Determination of resistance to grain cracking and grain crack index |
|
DS DS/EN ISO 3380 |
Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 degrees C |
|
DS DS/EN ISO 3759 |
Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change |
|
DS DS/EN ISO 3759/AC |
Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change |
|
DS DS/EN ISO 4044 |
Leather - Preparation of chemical test samples |
|
DS DS/EN ISO 4045 |
Leather - Determination of pH |
|
DS DS/EN ISO 4047 |
Leather - Determination of sulphated total ash and sulphated water- insoluble ash |
|
DS DS/EN ISO 4674- 1 |
Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods |
|
DS DS/EN ISO 4674- 2 |
Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 2: Ballistic pendulum method |
|
DS DS/EN ISO 4921 |
Knitting - Basic concepts - Vocabulary |
|
DS DS/EN ISO 5079 |
Textiles - Fibres - Determination of breaking force and elongation at break of individual fibres |
|
DS DS/EN ISO 5080 |
Sisal agricultural twines |
|
DS DS/EN ISO 5084 |
Textiles - Determination of thickness of textiles and textile products |
|
DS DS/EN ISO 5399 |
Leather - Determination of water-soluble magnesium salts - EDTA titrimetric method |
|
DS DS/EN ISO 5402 |
Leather - Physical and mechanical tests - Determination of flex resistance by flexometer method |
|
DS DS/EN ISO 5403 |
Leather - Physical and mechanical tests - Determination of water resistance of flexible leathers |
|
DS DS/EN ISO 5404 |
Leather - Physical and mechanical tests - Determination of the water resistance of heavy leathers |
|
DS DS/EN ISO 5470- 1 |
Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader |
|
DS DS/EN ISO 5470- 2 |
Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 2: Martindale abrader |
|
DS DS/EN ISO 5981 |
Rubber- or plastics-coated fabrics - Determination of resistance to combined shear flexing and rubbing |
|
DS DS/EN ISO 6179 |
Rubber, vulcanized or thermoplastic - Rubber sheets and rubber- coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) |
|
DS DS/EN ISO 6330 |
Textiles - Domestic washing and drying procedures for textile testing |
|
DS DS/EN ISO 6940 |
Textile fabrics - Burning behaviour - Determination of ease of ignition of vertically oriented specimens |
|
DS DS/EN ISO 6941 |
Textile fabrics - Burning behaviour - Measurement of flame spread properties of vertically oriented specimens |
|
DS DS/EN ISO 7854 |
Rubber- or plastics-coated fabrics - Determination of resistance to damage by flexing |
|
DS DS/EN ISO 8388 |
Knitted fabrics - Types - Vocabulary |
|
DS DS/EN ISO 9073- 2 |
Textiles - Test methods for nonwovens - Part 2: Determination of thickness |
|
DS DS/EN ISO 9073- 2/COR.1 |
Textiles - Test methods for nonwovens - Part 2: Determination of thickness |
|
DS DS/EN ISO 9073- 4 |
Textiles - Test methods for nonwovens - Part 4: Determination of tear resistance |
|
DS DS/EN ISO 9073- 6 |
Textiles - Test methods for nonwovens - Part 6: Absorption |
|
DS DS/EN ISO 9073- 7 |
Textiles - Test methods for nonwovens - Part 7: Determination of bending length |
|
DS DS/EN ISO 9073- 8 |
Textiles - Test methods for nonwovens - Part 8: Determination of liquid strike-through time (simulated urine) |
|
DS DS/EN ISO 9073- 9 |
Textiles - Test methods for nonwovens - Part 9: Determination of drape coefficient |
|
DS DS/EN ISO 9163 |
Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings |
|
DS DS/EN ISO 9237 |
Textiles - Determination of permeability of fabrics to air |
|
DS DS/EN ISO 9239- 1 |
Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source |
|
DS DS/EN ISO 9554 |
Fibre ropes General specifications |
|
DS DS/EN ISO 9863- 2 |
Geotextiles and geotextile-related products - Determination of thickness at specified pressures - Part 2: Procedure for determination of thickness of single layers of multilayer products |
|
DS DS/EN ISO 9902- 1 |
Textile machinery - Noise test code - Part 1: Common requirements |
|
DS DS/EN ISO 9902- 2 |
Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery |
|
DS DS/EN ISO 9902- 3 |
Textile machinery - Noise test code - Part 3: Nonwoven machinery |
|
DS DS/EN ISO 9902- 4 |
Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery |
|
DS DS/EN ISO 9902- 5 |
Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery |
|
DS DS/EN ISO 9902- 6 |
Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery |
|
DS DS/EN ISO 9902- 7 |
Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery |
|
DS DS/ENV 12936 |
Feather and down - Determination of the permanent deformation after dynamic fatigue stress under constant load |
|
DS DS/ENV ISO 10722- 1 |
Geotextiles and geotextile-related products - Procedure for simulating damage during installation - Part 1: Installation in granular materials |
|
DS DS/INF 42 |
Textiles - Fibres and yarns - Determination of commercial mass of consignments - Values used for commercial allowances and the commercial moisture regains |
|
DS DS/ISO 105- C03 |
Textiles - Tests for colour fastness - Part C03: Colour fastness to washing: Test 3 |
|
DS DS/ISO 139 |
Textiles - Standard atmospheres for conditioning and testing |
|
DS DS/ISO 4880 |
Burning behaviour of textiles and textile products - Vocabulary |
|
DS DS/ISO 4920 |
Textile fabrics - Determination of resistance to surface wetting (spray test) |
|
DS DS/ISO 6741- 2 |
Textiles - Fibres and yarns - Determination of commercial mass of consignments - Part 2: Methods for obtaining Laboratory samples |
|
DS DS/ISO 6741- 3 |
Textiles - Fibres and yarns - Determination of commercial mass of consignments - Part 3: Specimen cleaning procedures |
|
DS DS/ISO 6925 |
Textile floor coverings - Burning behaviour - Tablet test at ambient temperature |
|
DS DS/ISO 7768 |
Textiles - Method for assessing the appearance of durable press fabrics after domestic washing and drying |
|
DS DS/ISO 7769 |
Textiles - Method for assessing the appearance of creases in durable press products after domestic washing and drying |
|
DS DS/ISO 7770 |
Textiles - Method for assessing the appearence of seams in durable press products after domestic washing and drying |
|
DS DS/ISO 811 |
Textile fabrics - Determination of resistance to water penetration - Hydrostatic pressure test |
|
DS DS/ISO 9239- 2 |
Reaction to fire tests for floorings - Part 2: Determination of flame spread at a heat flux level of 25 kw/m2 |