|
DS DS 2047 |
Transport units - Boxpallets - Testing |
|
DS DS 2068 |
Glass bottles for mineral water - 25 cl |
|
DS DS 2157 |
Pallets - Repair of EUR-pallets |
|
DS DS 2160 |
Modular coordination in the transport chain |
|
DS DS 2161 |
Modular co-ordination within the transport chain - Pallets1 pattern |
|
DS DS 2400 |
Packaging - Bottles - Crown cork opener |
|
DS DS 364 |
Pallets - Basic dimensions |
|
DS DS 364.1 |
Pallets - 800 mm x 600 mm - Requirements and testing. |
|
DS DS 364.2 |
Pallets - Repair of pallets 800 mm x 600 mm |
|
DS DS 389 |
Screw threads for bottles and glass jars |
|
DS DS 53 |
Glass bottles for beer |
|
DS DS 992 |
Packaging - Ribbed glass bottles for dangerous goods |
|
DS DS/CEN/CR 12340 |
Packaging - Recommendations for conducting life-cycle inventory analysis of packaging systems |
|
DS DS/CEN/CR 13504 |
Packaging - Material recovery - Criteria for a minimum content of recycled material |
|
DS DS/CEN/CR 13686 |
Packaging - Optimization of energy recovery from packaging waste |
|
DS DS/CEN/CR 13688 |
Packaging - Material recycling - Report on requirements for substances and materials to prevent a sustained impediment to recycling |
|
DS DS/CEN/CR 13695- 1 |
Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment - Part 1: Requirements for measuring and verifying the four heavy metals present in packa |
|
DS DS/CEN/CR 13910 |
Packaging - Report on criteria and methodologies for life cycle analysis of packaging |
|
DS DS/CEN/CR 14311 |
Packaging - Marking and material identification system |
|
DS DS/CEN/TR 13695- 2 |
Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment - Part 2: Requirements for measuring and verifying dangerous substances present in packa |
|
DS DS/CEN/TR 14520 |
Packaging Reuse Methods for determining the number of trips or rotations |
|
DS DS/CEN/TS 13853 |
Swap bodies for combined transport - Stackable swap bodies type C 745-S16 - Dimensions, design requirements and testing |
|
DS DS/CEN/TS 14993 |
Swap bodies for combined transport Stackable swap bodies type A 1371 Dimensions, design requirements and testing |
|
DS DS/EN 10333 |
Steel for packaging Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption Tin coated steel (tinplate) |
|
DS DS/EN 10334 |
Steel for packaging Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption Non-coated steel (blackplate) |
|
DS DS/EN 10335 |
Steel for packaging Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption Non alloyed electrolytic chromium/chromium oxide coated steel |
|
DS DS/EN 1086 |
Sacks for the transport of food aid - Recommendations on the selection of type of sack and the liner in relation to the product to be packed |
|
DS DS/EN 12079 |
Offshore containers - Design, construction, testing, inspection and marking |
|
DS DS/EN 12195- 1 |
Load restraint assemblies on road vehicles - Safety - Part 1: Calculation of lashing forces |
|
DS DS/EN 12246 |
Quality classification of timber used in pallets and packaging |
|
DS DS/EN 12248 |
Sawn timber used in industrial packaging - Permitted deviations and preferential sizes |
|
DS DS/EN 12249 |
Sawn timber used in pallets - Permitted deviations and guidelines for dimensions |
|
DS DS/EN 12374 |
Packaging - Flexible tubes - Terminology |
|
DS DS/EN 12375 |
Packaging - Flexible aluminium tubes - Wall thickness determination method |
|
DS DS/EN 12377 |
Packaging - Flexible tubes - Test method for the airtightness of closures |
|
DS DS/EN 12406 |
Swap bodies - Thermal swap bodies of Class C - Dimensions and general requirements |
|
DS DS/EN 12410 |
Swap bodies - Thermal swap bodies of Class A - Dimensions and general requirements |
|
DS DS/EN 12640 |
Securing of cargo on road vehicles - Lashing points on commercial vehicles for goods transportation - Minimum requirements and testing |
|
DS DS/EN 12641- 1 |
Swap bodies and commercial vehicles Tarpaulins Part 1: Minimum requirements |
|
DS DS/EN 12642 |
Securing of cargo on road vehicles - Body structure of commercial vehicles- Minimum requirements |
|
DS DS/EN 12674- 1 |
Roll containers - Part 1: Terminology |
|
DS DS/EN 12674- 2 |
Roll containers - Part 2: General design and safety principles |
|
DS DS/EN 12707 |
Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 210 l, 220 l and 225 l |
|
DS DS/EN 12708 |
Plug/bung closure systems for plastics containers with a nominal capacity of 20 l to 225 l |
|
DS DS/EN 12709 |
Plastics drums - Non-removable head (tight head) circular cross- section drums with a nominal capacity of 20 l to 120 l |
|
DS DS/EN 12710 |
Fibreboard drums - Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l |
|
DS DS/EN 12711 |
Steel drums - Non-removable head (tight head) drums with a minimum total capacity of 230 l |
|
DS DS/EN 12712 |
Plastics jerricans - Jerricans with a nominal capacity of 20 l to 60 l for optimal utilization of pallet sizes 800 mm x 1200 mm, 1000 mm x 1200 mm and 1140 mm x 1140 mm |
|
DS DS/EN 12713 |
Screw cap closure systems for plastics containers with a nominal capacity of 20 l to 60 l |
|
DS DS/EN 12714 |
Plastics drums - Removable head (open head) drums with a nominal capacity of 25 l to 220 l |
|
DS DS/EN 12726 |
Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules |
|
DS DS/EN 12928 |
Inserted flange type closure systems for steel drums with a total capacity of 17 l to 230 l |
|
DS DS/EN 13007 |
Steel drums - Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l |
|
DS DS/EN 13008 |
Steel drums - Removable head (open head) drums with a nominal capacity of 15 l to 62 l |
|
DS DS/EN 13010 |
Packaging - Unit packaging - Dimensions and requirements for pegboard display |
|
DS DS/EN 13011 |
Transportation Services - Goods transport chains - System for declaration of performance conditions |
|
DS DS/EN 13025 |
Packaging - Light gauge metal packaging - Nominal filling volumes for round cylindrical and tapered general use metal containers up to 40 000 ml |
|
DS DS/EN 13026 |
Packaging - Light gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30 000 ml |
|
DS DS/EN 13027 |
Packaging - Light gauge metal packaging - Open-top cans defined by their nominal gross-lidded capacity |
|
DS DS/EN 13028 |
Packaging - Light gauge metal packaging - Round open-top cans for beverage products with or without added gas, defined by their nominal filling volumes. |
|
DS DS/EN 13029 |
Packaging - Light gauge metal packaging - Apertures for plug-in plastic closures |
|
DS DS/EN 13044 |
Swap bodies - Coding, identification and marking |
|
DS DS/EN 13045 |
Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances |
|
DS DS/EN 13046 |
Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances |
|
DS DS/EN 13047 |
Packaging - Flexible conical metallic tubes - Dimensions and tolerances |
|
DS DS/EN 13048 |
Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method |
|
DS DS/EN 13054 |
Packaging - Complete, filled transport packages - Test methods for the determination of the centre of gravity of a package |
|
DS DS/EN 13117- 1 |
Transport packaging - Reusable, rigid plastics distribution boxes - Part 1: General purpose application |
|
DS DS/EN 13117- 2 |
Transport packaging - Reusable, rigid plastics distribution boxes - Part 2: General specifications for testing |
|
DS DS/EN 13193 |
Packaging - Packaging and the environment - Terminology |
|
DS DS/EN 13199- 1 |
Packaging - Small Load Carrier Systems - Part 1: Common requirements and test methods |
|
DS DS/EN 13199- 2 |
Packaging - Small Load Carrier Systems - Part 2: Column Stackable System (CSS) |
|
DS DS/EN 13199- 3 |
Packaging - Small Load Carrier Systems - Part 3: Bond Stackable System (BSS) |
|
DS DS/EN 13246 |
Packaging - Specification for tensional steel strapping |
|
DS DS/EN 13247 |
Packaging - Specification for tensional strapping for lifting, lashing and securing of loads |
|
DS DS/EN 13382 |
Flat pallets for materials handling - Principal dimensions |
|
DS DS/EN 13393 |
Packaging - Specification for edge protectors |
|
DS DS/EN 13394 |
Packaging - Specification for non-metallic tensional strapping |
|
DS DS/EN 13427 |
Packaging - Requirements for the use of European Standards in the field of packaging and packaging waste |
|
DS DS/EN 13428 |
Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction |
|
DS DS/EN 13429 |
Packaging - Reuse |
|
DS DS/EN 13430 |
Packaging - Requirements for packaging recoverable by material recycling |
|
DS DS/EN 13431 |
Packaging - Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value |
|
DS DS/EN 13432 |
Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging-Corrigendum:7/21/2005 |
|
DS DS/EN 13437 |
Packaging and material recycling - Criteria for recycling methods - Description of recycling processes and flow chart |
|
DS DS/EN 13439 |
Packaging - Rate of energy recovery - Definition and method of calculation |
|
DS DS/EN 13440 |
Packaging - Rate of recycling - Definition and method of calculation |
|
DS DS/EN 13461 |
Packaging - Cylindrical flexible laminated tubes - Dimensions and tolerances |
|
DS DS/EN 13545 |
Pallet superstructures - Pallet collars - Test methods and performance requirements |
|
DS DS/EN 13590 |
Packaging - Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity |
|
DS DS/EN 13592 |
Plastics sacks for household waste collection - Types, requirements and test methods-Corrigendum:7/21/2005 |
|
DS DS/EN 13593 |
Packaging - Paper sacks for household waste collection - Types, requirements and test methods |
|
DS DS/EN 13626 |
Packaging - Box pallets - General requirements and test methods |
|
DS DS/EN 13628- 1 |
Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 1: Absolute methods |
|
DS DS/EN 13628- 2 |
Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 2: Industrial methods |
|
DS DS/EN 13676 |
Polymer coated paper and board intended for food contact - Detection of pinholes |
|
DS DS/EN 13698- 1 |
Pallet production specification - Part 1: Construction specification for 800 mm x 1200 mm flat wooden pallets |
|
DS DS/EN 13698- 2 |
Pallet production specification - Part 2: Construction specification for 1000 mm x 1200 mm flat wooden pallets |
|
DS DS/EN 13876 |
Transport - Logistics and Services - Goods transport chains - Code of practice for the provision of cargo transport services |
|
DS DS/EN 13891 |
Tensional strapping - Guide to selection and use of tensional strapping |
|
DS DS/EN 13972 |
Rigid plastics containers - Definition of nominal, brimful and total capacity and measurement of brimful and total capacity |
|
DS DS/EN 13973 |
Rigid plastics containers - Method for determination of drainability |
|
DS DS/EN 13974 |
Rigid plastics containers - Specification of tolerance for dimensions, weight and volume |
|
DS DS/EN 14045 |
Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions |
|
DS DS/EN 14046 |
Packaging - Evaluation of the ultimate aerobic biodegradability and disintegration of packaging materials under controlled composting conditions - Method by analysis of released carbon dioxide |
|
DS DS/EN 14047 |
Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide |
|
DS DS/EN 14048 |
Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer |
|
DS DS/EN 14053 |
Packaging - Packagings manufactured from corrugated or solid fibreboard - Types and construction |
|
DS DS/EN 14054 |
Packaging - Paper and paperboard packaging - Design of cartons |
|
DS DS/EN 14149 |
Packaging - Complete, filled transport packages and unit loads - Impact test by rotational drop |
|
DS DS/EN 14182 |
Packaging - Terminology - Basic terms and definitions |
|
DS DS/EN 1432 |
Swap bodies - Swap tanks - Dimensions, requirements, test methods, operation conditions |
|
DS DS/EN 14375 |
Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing |
|
DS DS/EN 14391 |
Packaging - Collapsible aluminium tubes - Tactile warnings of danger |
|
DS DS/EN 14401 |
Rigid plastics containers - Methods to test the effectiveness of closures |
|
DS DS/EN 14477 |
Packaging - Flexible packaging material - Determination of puncture resistance - Test methods |
|
DS DS/EN 14479 |
Packaging - Flexible packaging material - Determination of residual solvents by dynamic headspace gas chromatography - Absolute method |
|
DS DS/EN 14634 |
Glass packaging - 26 H 180 crown finish - Dimensions |
|
DS DS/EN 14635 |
Glass packaging - 26 H 126 crown finish - Dimensions |
|
DS DS/EN 14768 |
Fibreboard drums Removable head (open head) drums with slip on lids with a nominal capacity of 5 l to 600 |
|
DS DS/EN 14867 |
Packaging Plastic freezer bags Specifications and test methods |
|
DS DS/EN 209 |
Steel drums - Removable head (open head) drums with a minimum total capacity of 210 l. |
|
DS DS/EN 210 |
Steel drums - Non-removable head (tight head) drums with a minimum total capacity of 216,5 l |
|
DS DS/EN 22206 |
Packaging - Complete, filled transport packages - Part 1: Identification of parts when testing |
|
DS DS/EN 22248 |
Packaging - Complete, filled transport packages - Vertical impact test by dropping |
|
DS DS/EN 22876 |
Packaging - Complete, filled transport packages - Rolling test |
|
DS DS/EN 23- 1 |
Packages for washing and cleaning powder - Dimensions and volumes of cartons and drums from fibre board |
|
DS DS/EN 24178 |
Complete filled transport packages - Distribution trials - Information to be recorded |
|
DS DS/EN 24180- 1 |
Complete, filled transport packages - General rules for the compilation of performance test schedules - Part 1: General principles |
|
DS DS/EN 24180- 2 |
Complete, filled transport packages - General rules for the compilation of performance test schedules - Part 2: Quantitative data |
|
DS DS/EN 26590- 1 |
Packaging - Sacks - Vocabulary and types - Part 1: Paper sacks |
|
DS DS/EN 26590- 2 |
Packaging - Sacks - Vocabulary and types - Part 2: Sacks made from thermoplastic flexible film |
|
DS DS/EN 26591- 1 |
Packaging - Sacks - Description and method of measurement - Part 1: Empty paper sacks |
|
DS DS/EN 26591- 2 |
Packaging - Sacks - Description and method of measurement - Part 2: Empty sacks made from thermoplastic flexible film. |
|
DS DS/EN 26599- 1 |
Packaging - Sacks - Conditioning for testing - Part 1: Paper sacks |
|
DS DS/EN 27023 |
Packaging - Sacks - Method of sampling empty sacks for testing |
|
DS DS/EN 277 |
Sacks for the transport of food aid - Sacks made of woven polypropylene fabric |
|
DS DS/EN 27965- 1 |
Packaging - Sacks - Drop test - Part 1: Paper sacks |
|
DS DS/EN 283 |
Swap bodies - Testing |
|
DS DS/EN 28317 |
Child-resistant packaging - Requirements and testing procedures for reclosable packages |
|
DS DS/EN 284 |
Swap bodies - Swap bodies of class C - Dimensions and general requirements |
|
DS DS/EN 28474 |
Packaging - Complete, filled transport packages - Water immersion test |
|
DS DS/EN 28768 |
Packaging - Complete filled transport packages - Toppling test |
|
DS DS/EN 29008 |
Glass bottles - Verticality - Test method |
|
DS DS/EN 29009 |
Glass containers - Height and non-parallelism of finish with reference to container base - Test methods |
|
DS DS/EN 29885 |
Wide-mouth glass containers - Deviation from flatness of top sealing surface - Test methods |
|
DS DS/EN 415- 1 |
Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment |
|
DS DS/EN 415- 2 |
Safety of packaging machines - Part 2: Pre-formed rigid container packaging machines |
|
DS DS/EN 415- 3 |
Safety of packaging machines - Part 3: Form, fill and seal machines |
|
DS DS/EN 415- 4 |
Safety of packaging machines - Part 4: Palletisers and depalletisers |
|
DS DS/EN 415- 4/AC |
Safety of packaging machines - Part 4: Palletisers and depalletisers |
|
DS DS/EN 452 |
Swap bodies - Swap bodies of Class A - Dimensions and general requirements |
|
DS DS/EN 60264-2- 1/A1 |
Packaging of winding wires - Part 2-1: Cylindrical barrelled delivery spools - Basic dimensions |
|
DS DS/EN 60264-2- 2/A1 |
Packaging of winding wires - Part 2: Cylindrical barrelled delivery spools - Specification for returnable spools made from thermoplastic material-(AMENDS DS/EN 60264-2-2) |
|
DS DS/EN 60264-2- 3/A1 |
Packaging of winding wires - Part 2-3: Cylindrical barrelled delivery spools - Specification for non-returnable spools made from thermoplastic material-(AMENDS DS/EN 60264-2-3) |
|
DS DS/EN 60264-3- 1 |
Packaging of winding wires - Part 3-1: Taper barrelled delivery spools - Basic dimensions |
|
DS DS/EN 60264-3- 1 |
Packaging of winding wires - Part 3-1: Taper barrelled delivery spools - Basic dimensions-(AMENDS DS/EN 60264-3-1) |
|
DS DS/EN 60264-3- 2 |
Packaging of winding wires - Part 3-2: Taper barrelled delivery spools - Specification for returnable spools made from thermoplastic materials |
|
DS DS/EN 60264-3- 3/A1 |
Packaging of winding wires - Part 3-3: Taper barrelled delivery spools - Specification for non-returnable spools made from thermoplastic material-(AMENDS DS/EN 60264-3-3) |
|
DS DS/EN 60264-3- 4 |
Packaging of winding wires - Part 3-4: Taper barrelled delivery spools - Basic dimensions of containers for taper barrelled delivery spools. |
|
DS DS/EN 60264-3- 5 |
Packaging of winding wires - Part 3-5: Taper barrelled delivery spools - Specification for spool containers made from thermoplastic material |
|
DS DS/EN 60264-4- 2+A1 |
Packaging of winding wires - Part 4: Methods of test - Section 2: Containers made from thermoplastic material for taper barrelled delivery spools |
|
DS DS/EN 60264-5- 1 |
Packaging of winding wires - Part 5-1: Cylindrical barelled delivery spools with conical flanges - Basic dimensions |
|
DS DS/EN 60264-5- 1/A1 |
Packaging of winding wires - Part 5-1: Cylindrical barelled delivery spools with conical flanges - Basic dimensions-(AMENDS DS/EN 60264-5-1) |
|
DS DS/EN 60264-5- 2 |
Packaging of winding wires - Part 5-2: Cylindrical barrelled delivery spools with conical flanges - Specification for returnable spools made from thermoplastic material |
|
DS DS/EN 60335-2- 75 |
Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines- Amendment 1:4/18/2005 |
|
DS DS/EN 645 |
Paper and board intended to come into contact with foodstuffs - Preparation of a cold water extract |
|
DS DS/EN 646 |
Paper and board intended to come into contact with foodstuffs - Determination of colour fastness of dyed paper and board |
|
DS DS/EN 647 |
Paper and board intended to come into contact with foodstuffs - Preparation of a hot water extract |
|
DS DS/EN 76 |
Packages for certain prepacked foodstuffs - Capacities of glass and metal containers |
|
DS DS/EN 765 |
Sacks for the transport of food aid - Sacks made of woven polyolefin fabric other than polypropylene only |
|
DS DS/EN 766 |
Sacks for the transport of food aid - Sacks made of jute fabric |
|
DS DS/EN 767 |
Sacks for the transport of food aid - Sacks made of woven jute/polyolefine fabric |
|
DS DS/EN 768 |
Sacks for the transport of food aid - Sacks made of lined cotton fabric |
|
DS DS/EN 769 |
Sacks for the transport of food aid - Sacks made of woven cotton/ polyolefine fabric |
|
DS DS/EN 770 |
Sacks for the transport of food aid - Paper sacks |
|
DS DS/EN 787 |
Sacks for the transport of food aid - Sacks made of polythylene film |
|
DS DS/EN 788 |
Sacks for the transport of food aid - Tubular sacks made of composite film |
|
DS DS/EN 862 |
Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products |
|
DS DS/EN ISO 10374 |
Freight containers - Automatic identification |
|
DS DS/EN ISO 11683 |
Packaging - Tactile warnings of danger - Requirements |
|
DS DS/EN ISO 11897 |
Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds |
|
DS DS/EN ISO 12048 |
Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester |
|
DS DS/EN ISO 12777- 1 |
Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples |
|
DS DS/EN ISO 12777- 2 |
Methods of test for pallet joints - Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples |
|
DS DS/EN ISO 12777- 3 |
Methods of test for pallet joints - Part 3: Determination of strength of pallet joints |
|
DS DS/EN ISO 13355 |
Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test |
|
DS DS/EN ISO 15119 |
Packaging - Sacks - Determination of the friction of filled sacks |
|
DS DS/EN ISO 15867 |
Intermediate bulk containers (IBCs) for non-dangerous goods - Terminology |
|
DS DS/EN ISO 16101 |
Packaging - Transport packaging for dangerous goods - Plastics compatibility testing |
|
DS DS/EN ISO 16103 |
Packaging Transport packages for dangerous goods Recycled plastics material |
|
DS DS/EN ISO 16104 |
Packaging - Transport packaging for dangerous goods - Test methods |
|
DS DS/EN ISO 16467 |
Packaging - Transport packages for dangerous goods - Test methods for IBCs |
|
DS DS/EN ISO 18613 |
Repair of flat wooden pallets |
|
DS DS/EN ISO 21898 |
Packaging Flexible intermediate bulk containers (FIBCs) for non- dangerous goods-:2001 |
|
DS DS/EN ISO 2233 |
Packaging - Complete, filled transport packages and unit loads - Conditioning for testing |
|
DS DS/EN ISO 2234 |
Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load |
|
DS DS/EN ISO 2244 |
Packaging - Complete, filled transport packages and unit loads - Horizontal impact tests |
|
DS DS/EN ISO 2247 |
Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency |
|
DS DS/EN ISO 2873 |
Packaging - Complete, filled transport packages and unit loads - Low pressure test |
|
DS DS/EN ISO 2875 |
Packaging - Complete, filled transport packages and unit loads - Water-spray test |
|
DS DS/EN ISO 445 |
Pallets for materials handling - Vocabulary |
|
DS DS/EN ISO 6346 |
Freight containers - Coding, identification and marking |
|
DS DS/EN ISO 7458 |
Glass containers - Internal pressure resistance - Test methods |
|
DS DS/EN ISO 7459 |
Glass containers - Thermal shock resistance and thermal shock endurance - Test methods |
|
DS DS/EN ISO 780 |
Packaging - Pictorial marking for handling of goods |
|
DS DS/EN ISO 7965- 2 |
Sacks - Drop test - Part 2: Sacks made from thermoplastic flexible film |
|
DS DS/EN ISO 8113 |
Glass containers - Resistance to vertical load - Test method |
|
DS DS/EN ISO 8317 |
Child-resistant packaging - Requirements and testing procedures for reclosable packages-Corrigendum:5/26/2005 |
|
DS DS/EN ISO 8318 |
Packaging - Complete, filled transport packages and unit loads - Sinusoidal vibration tests using a variable frequency |
|
DS DS/EN ISO 8351- 1 |
Packaging - Method of specification for sacks - Part 1: Paper sacks |
|
DS DS/EN ISO 8351- 2 |
Packaging - Method of specification for sacks - Part 2: Sacks made from thermoplastic flexible film |
|
DS DS/EN ISO 8367- 1 |
Packaging - Dimensional tolerances for general purpose sacks - Part 1: Paper sacks |
|
DS DS/EN ISO 8367- 2 |
Packaging - Dimensional tolerances for general purpose sacks - Part 2: Sacks made from thermoplastic flexible film |
|
DS DS/EN ISO 8611- 1 |
Pallets for materials handling - Flat pallets - Part 1: Test methods |
|
DS DS/EN ISO 90- 1 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 1: Open-top cans |
|
DS DS/EN ISO 90- 2 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 2: General use containers |
|
DS DS/EN ISO 90- 3 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans |
|
DS DS/EN ISO 9100- 1 |
Glass containers Vacuum lug finishes Part 1: Dimensions |
|
DS DS/EN ISO 9100- 11 |
Glass containers Vacuum lug finishes Part 11: 82 regular |
|
DS DS/EN ISO 9100- 12 |
Glass containers Vacuum lug finishes Part 12: 89 regular |
|
DS DS/EN ISO 9100- 13 |
Glass containers Vacuum lug finishes Part 13: 100 regular |
|
DS DS/EN ISO 9100- 14 |
Glass containers Vacuum lug finishes Part 14: 110 regular |
|
DS DS/EN ISO 9100- 5 |
Glass containers Vacuum lug finishes Part 5: 43 and 48 regular |
|
DS DS/EN ISO 9100- 6 |
Glass containers Vacuum lug finishes Part 6: 53 and 58 regular |
|
DS DS/EN ISO 9100- 7 |
Glass containers Vacuum lug finishes Part 7: 58 deep |
|
DS DS/EN ISO 9100- 8 |
Glass containers Vacuum lug finishes Part 8: 63, 66 and 70 regular |
|
DS DS/EN ISO 9100- 9 |
Glass containers Vacuum lug finihses Part 9: 63, 66 and 70 deep |
|
DS DS/INF 101 |
Packaging - Energy recovery from used packaging |
|
DS DS/INF 110 |
Guide for the choice of plastic packaging for foods |
|
DS DS/INF 30 |
Packaging - Estimating the filled volume using the flat dimensions - Part 1: Paper sacks |
|
DS DS/INF 52 |
General-purpose flat pallets for through transit of goods - Performance requirements |
|
DS DS/INSTA 440 |
Flexible materials - Code for stating of reeling direction and print orientation |
|
DS DS/INSTA 510 |
Flexible intermediate bulk containers - Scope of inspection and terminology |
|
DS DS/INSTA 511 |
Flexible intermediate bulk containers - General guidelines for handling etc. |
|
DS DS/INSTA 512 |
Flexible intermediate bulk containers - Heavy duty multitrip FIBCs |
|
DS DS/INSTA 513 |
Flexible intermediate bulk containers - Standard duty re-usable FIBCs |
|
DS DS/INSTA 514 |
Flexible intermediate bulk containers - Standard duty single-trip FIBCs |
|
DS DS/INSTA 515 |
Flexible intermediate bulk containers - Standard duty single-trip pallet borne FIBCs |
|
DS DS/INSTA 516 |
Flexible intermediate bulk containers - Cyclic top lift performance, methods of test |
|
DS DS/INSTA 517 |
Flexible intermediate bulk containers - Compression resistance test |
|
DS DS/INSTA 518 |
Flexible intermediate bulk containers - UV-resistance test |
|
DS DS/INSTA 520 |
Flexible intermediate bulk containers - Dynamic drop test |
|
DS DS/INSTA 550 |
Packaging - Symbols for opening methods |
|
DS DS/INSTA 551- 1 |
Packaging - Dimensional coordination - Part 1: Principles |
|
DS DS/INSTA 551- 2 |
Packaging - Dimensional coordination - Part 2: Terminology |
|
DS DS/INSTA 551- 3 |
Packaging - Dimensional coordination - Part 3: Rules and dimensions |
|
DS DS/ISO 10368 |
Freight thermal containers - Remote condition monitoring |
|
DS DS/ISO 1161 |
Series 1 freight containers - Corner fittings - Specification |
|
DS DS/ISO 1161/COR.1 |
Series 1 freight containers - Corner fittings - Specification |
|
DS DS/ISO 1361 |
Light-gauge metal containers - Round open-top cans - Internal diameters |
|
DS DS/ISO 14829 |
Freight containers - Straddle carriers for freight container handling - Calculation of stability |
|
DS DS/ISO 1496- 1 |
Series 1 freight containers - Specification and testing - Part 1: General cargo containers for general purposes |
|
DS DS/ISO 1496- 1/Amd.1 |
Series 1 freight containers - Specification and testing - Part 1: General cargo containers for general purposes - Amendment 1: 1AAA and 1BBB containers- (AMENDS DS/ISO 1496-1) |
|
DS DS/ISO 1496- 1/Amd.2 |
Series 1 freight containers - Specification and testing - Part 1: General cargo containers for general purpose-(AMENDS DS/ISO 1496-1) |
|
DS DS/ISO 1496- 2 |
Series 1 freight containers - Specification and testing - Part 2: Thermal containers |
|
DS DS/ISO 1496- 3 |
Series 1 freight containers - Specification and testing - Part 3: Tank containers for liquids, gases and pressurized dry bulk |
|
DS DS/ISO 1496- 4 |
Series 1 freight containers - Specification and testing - Part 4: Non- pressurized containers for dry bulk |
|
DS DS/ISO 1496- 4/Amd.1 |
Series 1 freight containers - Specification and testing - Part 4: Non- pressurized containers for dry bulk - Amendment 1: 1AAA and 1BBB containers-(AMENDS DS/ISO 1496-4) |
|
DS DS/ISO 1496- 5 |
Series 1 freight containers - Specification and testing - Part 5: Platform and platform-based containers |
|
DS DS/ISO 1496- 5/Amd.1 |
Series 1 freight containers - Specification and testing - Part 5: Platform and platform-based containers - Amendment 1: 1AAA and 1BBB containers- (AMENDS DS/ISO 1496-5) |
|
DS DS/ISO 1496- 5/Amd.2 |
Series 1 freight containers - Specification and testing - Part 5: Platform and platform-based containers-(AMENDS DS/ISO 1496-5) |
|
DS DS/ISO 15394 |
Packaging - Bar code and two-dimensional symbols for shipping, transport and receiving labels |
|
DS DS/ISO 15629 |
Pallets for materials handling - Quality of fasteners for assembly of new and repair of used, flat, wooden pallets |
|
DS DS/ISO 15750- 3 |
Packaging - Steel drums - Part 3: Inserted flange-type closure systems |
|
DS DS/ISO 18333 |
Pallets for materials handling - Quality of new wooden components for flat pallets |
|
DS DS/ISO 18334 |
Pallets for materials handling - Quality of assembly of new, wooden, flat pallets |
|
DS DS/ISO 2206 |
Packaging - Complete, filled transport packages - Identification of parts when testing |
|
DS DS/ISO 2244 |
Packaging - Complete, filled transport packages - Horizontal impact tests (horizontal or inclined plane test; pendulum test) |
|
DS DS/ISO 2247 |
Packaging - Complete, filled transport packages - Vibration test at fixed low frequency |
|
DS DS/ISO 2248 |
Packaging - Complete, filled transport packages - Vertical impact test by dropping |
|
DS DS/ISO 22742 |
Packaging Linear bar code and two-dimensional symbols for product packaging |
|
DS DS/ISO 3394 |
Dimensions of rigid rectangular packages - Transport packages |
|
DS DS/ISO 3874 |
Series 1 freight containers - Handling and securing |
|
DS DS/ISO 3874/Amd.1 |
Series 1 freight containers - Handling and securing - Amendment 1: Twistlocks, latchlocks, stacking fittings and lashing rod systems for securing of containers-, (AMENDS DS/ISO 3874) |
|
DS DS/ISO 3874/Amd.2 |
Series 1 freight containers - Handling and securing - Amendment 2: Vertical tandem lifting-(AMENDS DS/ISO 3874) |
|
DS DS/ISO 6591/1 |
Packaging - Sacks - Description and method of measurement - Part 1: Empty paper sacks |
|
DS DS/ISO 668 |
Series 1 freight containers - Classification, dimensions and ratings |
|
DS DS/ISO 780 |
Packaging - Pictorial marking for handling of goods |
|
DS DS/ISO 830 |
Freight containers - Vocabulary |
|
DS DS/ISO 830/COR.1 |
Freight containers - Vocabulary |
|
DS DS/ISO 8323 |
Freight containers - Air/surface (intermodal) general purpose containers - Specification and tests |
|
DS DS/ISO 8768 |
Packaging - Complete filled transport packages - Toppling test. |
|
DS DS/ISO 9669 |
Series 1 freight containers - Interface connections for tank containers |
|
DS DS/ISO 9669/Amd.1 |
Series 1 freight containers - Interface connections for tank containers - Amendment 1: Sections 3 and 4-(AMENDS DS/ISO 9669) |
|
DS DS/ISO 9711- 1 |
Freight containers - Information related to containers on board vessels - Part 1: Bay plan system |
|
DS DS/ISO 9711- 2 |
Freight containers - Information related to containers on board vessels - Part 2: Telex data transmission |
|
DS DS/ISO 9897 |
Freight containers - Container equipment data exchange (CEDEX) - General communication codes |
|
DS DS/ISO 9897/COR.1 |
Freight containers - Container equipment data exchange (CEDEX) - General communication codes |
|
DS DS/ISO/IEC GUIDE 41 |
Packaging - Recommendations for addressing consumer needs |
|
DS DS/ISO/PAS 17712 |
Freight containers - Mechanical seals |
|
DS DS/ISO/TR 12776 |
Pallets - Slip sheets |
|
DS DS/ISO/TR 15069 |
Series 1 freight containers - Handling and securing - Rationale for ISO 3874 Annex A |
|
DS DS/ISO/TR 15070 |
Series 1 freight containers - Rationale for structural test criteria |
|
DS DS/ISO/TS 8611- 2 |
Pallets for materials handling Flat pallets Part 2: Performance requirements and selection of tests |
|
DS DS/ISO/TS 8611- 3 |
Pallets for materials handling Flat pallets Part 3: Maximum working loads |
|
DS DS/SBC 256 |
Special rules for the certification of conformity with the standard: DS/EN ISO 8317 Packaging - Child-resistant packaging - Requirements and testing procedures for reclosable packages (SBC 256) |