|
DS DS 2014 |
Industrial truck - Inspection - Lifting equipment |
|
DS DS 2015 |
Industrial truck - Inspection - Chains |
|
DS DS 2099 |
Industrial trucks - Fork arms - Capacity |
|
DS DS 2135 |
Inspection and repair of fork arms in service on fork lift truck |
|
DS DS 2141.1 |
Powered industrial trucks - Safety code |
|
DS DS 2142.10 |
Powered industrial trucks - Safety code - Requirements for power systems and accessories |
|
DS DS 2142.11 |
Powered industrial trucks - Safety code - Systems and components for lifting, tilting and other movements |
|
DS DS 2142.12 |
Powered industrial truck - Safety code - Protective devices |
|
DS DS 2142.4 |
Powered industrial trucks - Safety code - Rated capacity |
|
DS DS 2142.5 |
Powered industrial trucks - Safety code - Information plates |
|
DS DS 2142.6 |
Powered industrial trucks - Safety code - Stability - Requirements and tests |
|
DS DS 2142.7 |
Powered industrial trucks - Safety code - Brakes |
|
DS DS 2142.8 |
Powered industrial trucks - Safety code - Direction of travel controls |
|
DS DS 2142.9 |
Powered industrial trucks - Safety code - Control symbols |
|
DS DS 2143 |
Powered industrial truck - Safety code - Safety rules for the user and the operator |
|
DS DS 766 |
Data sheet - Counter balanced truck |
|
DS DS 905 |
Truck - Nominal and rated capacity - Definition |
|
DS DS 906 |
Industrial truck - Capacity marking - Requirements |
|
DS DS/EN 1175- 1 |
Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks |
|
DS DS/EN 1175- 2 |
Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks |
|
DS DS/EN 1175- 3 |
Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks |
|
DS DS/EN 12053 |
Safety of Industrial trucks - Test methods for measuring noise emissions |
|
DS DS/EN 12053/AC |
Safety of Industrial trucks - Test methods for measuring noise emissions |
|
DS DS/EN 12077- 2 |
Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices |
|
DS DS/EN 12158- 1 |
Builders hoists for goods - Part 1: Hoists with accessible platforms |
|
DS DS/EN 12158- 2 |
Builders hoists for the transport of goods - Part 2: Inclined hoists with non- accessible load carrying devices |
|
DS DS/EN 12159 |
Builders hoists for persons and materials with vertically guided cages |
|
DS DS/EN 12195- 2 |
Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres |
|
DS DS/EN 12195- 3 |
Load restraint assemblies on road vehicles - Safety - Part 3: Lashing chains |
|
DS DS/EN 12195- 4 |
Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes |
|
DS DS/EN 12527 |
Castors and wheels - Test methods and apparatus |
|
DS DS/EN 12532 |
Castors and wheels - Castors and wheels for applications up to 1,1 m/s (4 km/h) |
|
DS DS/EN 12533 |
Castors and wheels - Castors and wheels for applications over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h) |
|
DS DS/EN 12643 |
Earth-moving machinery - Rubber-tyred machines - Steering requirements |
|
DS DS/EN 12644- 1 |
Cranes - Information for use and testing - Part 1: Instructions |
|
DS DS/EN 12644- 2 |
Cranes - Information for use and testing - Part 2: Marking |
|
DS DS/EN 12881- 1 |
Conveyor belts Fire simulation flammability testing Part 1: Propane burner tests |
|
DS DS/EN 12882 |
Conveyor belts for general purpose use - Electrical and flammability safety requirements |
|
DS DS/EN 12895 |
Industrial trucks - Electromagnetic compatibility |
|
DS DS/EN 12999 |
Cranes - Loader cranes |
|
DS DS/EN 12999/A1 |
Cranes - Loader cranes-(AMENDS DS/EN 12999) |
|
DS DS/EN 13000 |
Cranes - Safety - Mobile cranes |
|
DS DS/EN 13059 |
Safety of industrial trucks - Test methods for measuring vibration |
|
DS DS/EN 13135- 1 |
Cranes - Safety - Design - Requirements for equipment - Part 1: Electrotechnical equipment |
|
DS DS/EN 13135- 2 |
Cranes - Equipment - Part 2: Non-electrotechnical equipment- Corrigendum AC: 10/27/2005 |
|
DS DS/EN 13155 |
Cranes - Non-fixed load lifting attachments-Amendment 1: 08/30/2005 |
|
DS DS/EN 13157 |
Cranes - Safety - Hand powered lifting equipment |
|
DS DS/EN 13411- 1 |
Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings |
|
DS DS/EN 13411- 2 |
Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings |
|
DS DS/EN 13411- 3 |
Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule- securing-Corrigendum: 10/27/2005 |
|
DS DS/EN 13411- 4 |
Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing |
|
DS DS/EN 13411- 5 |
Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips |
|
DS DS/EN 13411- 6 |
Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket |
|
DS DS/EN 13414- 1 |
Steel wire rope slings - Safety - Part 1: Slings for general lifting service- Amendment 1: 6/21/2005 |
|
DS DS/EN 13414- 2 |
Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer-Amendment A1: 09/30/2005 |
|
DS DS/EN 13414- 3 |
Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings |
|
DS DS/EN 13414- 3/AC |
Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings |
|
DS DS/EN 13490 |
Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration |
|
DS DS/EN 13510 |
Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements |
|
DS DS/EN 13510/AC |
Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements |
|
DS DS/EN 13510/AC |
Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements |
|
DS DS/EN 13531 |
Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements |
|
DS DS/EN 13557 |
Cranes - Controls and control stations-Amendment 1: 11/08/2005 |
|
DS DS/EN 13586 |
Cranes - Access |
|
DS DS/EN 13627 |
Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements |
|
DS DS/EN 13827 |
Steel cord conveyor belts - Determination of the lateral and vertical displacement of steel cords |
|
DS DS/EN 13852- 1 |
Cranes - Offshore cranes - Part 1: General purpose offshore cranes |
|
DS DS/EN 13852- 2 |
Cranes - Offshore cranes - Part 2: Floating cranes |
|
DS DS/EN 13889 |
Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety |
|
DS DS/EN 1398 |
Dock levellers |
|
DS DS/EN 14010 |
Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages |
|
DS DS/EN 14238 |
Cranes - Manually controlled load manipulating devices |
|
DS DS/EN 14502- 1 |
Cranes Equipment for lifting persons Part 1: Suspended baskets |
|
DS DS/EN 14502- 2 |
Cranes Equipment for the lifting of persons Part 2: Elevating control stations |
|
DS DS/EN 1459 |
Safety of industrial trucks - Self-propelled variable reach truck |
|
DS DS/EN 1492- 1 |
Textile slings - Safety - Part 1: Flat wowen webbing slings made of man- made fibres, for general purpose use |
|
DS DS/EN 1492- 2 |
Textile slings - Safety - Part 2: Roundslings, made of man-made fibres, for general purpose use |
|
DS DS/EN 1492- 4 |
Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes |
|
DS DS/EN 1493 |
Vehicle lifts |
|
DS DS/EN 1494 |
Mobile or movable Jacks and associated lifting equipment. |
|
DS DS/EN 1495/A1 |
Lifting platforms - Mast climbing work platforms-(AMENDS DS/EN 1495+AC) |
|
DS DS/EN 1495+AC |
Lifting platforms - Mast climbing work platforms |
|
DS DS/EN 1525 |
Safety of industrial trucks - Driverless trucks and their systems |
|
DS DS/EN 1526 |
Safety of industrial trucks - Additional requirements for automated functions on trucks |
|
DS DS/EN 1551 |
Safety of industrial trucks - Self propelled trucks over 10000 kg capacity |
|
DS DS/EN 1554 |
Conveyor belts - Drum friction testing |
|
DS DS/EN 1570 |
Safety requirements for lifting tables |
|
DS DS/EN 1570/A1 |
Safety requirements for lifting tables-(AMENDS DS/EN 1570) |
|
DS DS/EN 1637 |
Light conveyor belts - Test methods for the measurement of the electrical resistances |
|
DS DS/EN 1677- 1 |
Components for slings - Safety - Part 1: Forged steel components, Grade 8 |
|
DS DS/EN 1677- 2 |
Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8 |
|
DS DS/EN 1677- 3 |
Componenets for slings - Safety - Part 3: Forged steel self-locking hooks - Grade 8 |
|
DS DS/EN 1677- 4 |
Components for slings - Safety - Part 4: Links, Grade 8 |
|
DS DS/EN 1677- 5 |
Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4 |
|
DS DS/EN 1677- 6 |
Components for slings - Safety - Part 6: Links - Grade 4 |
|
DS DS/EN 1718 |
Light conveyor belts - Test method for the measurement of the electrostatic field generated by a running light conveyor belt |
|
DS DS/EN 1722 |
Light conveyor belts - Test method for the determination of the maximum tensile strength |
|
DS DS/EN 1723 |
Light conveyor belts - Method of test for the determination of the relaxed elastic modulus |
|
DS DS/EN 1724 |
Light conveyor belts - Test method for the determination of the coefficient of friction |
|
DS DS/EN 1726- 1 |
Safety of Industrial trucks - Self-propelled trucks up to and including 10 000 kg capacity and industrial tractors with a drawbar pull up to and including 20 000 N - Part 1: General requirements |
|
DS DS/EN 1726- 1/A1 |
Safety of industrial trucks - Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N - Part 1: General requirements-(AMENDS DS/EN 1726-1) |
|
DS DS/EN 1726- 2 |
Safety of industrial trucks - Self-propelled trucks up to and including 10 000 kg capacity and tractors with a drawbar pull up to and including 20 000 N - Part 2: Additional requirements for trucks with elevating operator position and trucks specifically |
|
DS DS/EN 1755 |
Safety of Industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust |
|
DS DS/EN 1756- 1 |
Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods |
|
DS DS/EN 1756- 2 |
Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers |
|
DS DS/EN 1757- 1 |
Safety of industrial trucks - Pedestrian propelled trucks - Part 1: Stacker trucks |
|
DS DS/EN 1757- 2 |
Safety of Industrial trucks - Pedestrian propelled trucks - Part 2: Pallet trucks |
|
DS DS/EN 1757- 3 |
Safety of industrial trucks - Pedestrian controlled manual and semi- manual trucks - Part 3: Platform trucks |
|
DS DS/EN 1757- 4 |
Safety of industrial trucks - Pedestrian propelled trucks - Part 4: Scissor lift pallet-trucks |
|
DS DS/EN 1808 |
Safety requirements on Suspended Access Equipment - Design calculations, stability criteria, construction - Tests |
|
DS DS/EN 20284 |
Conveyor belts - Electrical conductivity - Specification and method of test |
|
DS DS/EN 280 |
Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests |
|
DS DS/EN 280/A1 |
Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests-(AMENDS DS/EN 280) |
|
DS DS/EN 28094 |
Steel cord conveyor belts - Adhesion strength test of the cover to the core layer |
|
DS DS/EN 281 |
Self-propelled industrial trucks - Sit-down rider-controlled - Rules for the construction and layout of pedals |
|
DS DS/EN 474- 1+AC+A1 |
Earth-moving machinery - Safety - Part 1: General requirements |
|
DS DS/EN 474- 10 |
Earth-moving machinery - Safety - Part 10: Requirements for trenchers |
|
DS DS/EN 474- 11 |
Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors |
|
DS DS/EN 474- 2 |
Earth-moving machinery - Safety - Part 2: Requirements for tractor- dozers |
|
DS DS/EN 474- 3 |
Earth-moving machinery - Safety - Part 3: Requirements for loaders |
|
DS DS/EN 474- 4 |
Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders |
|
DS DS/EN 474-5 + AC |
Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators |
|
DS DS/EN 474-6 + AC |
Earth-moving machinery - Safety - Part 6: Requirements for dumpers |
|
DS DS/EN 474- 7 |
Earth-moving machinery - Safety - Part 7: Requirements for scrapers |
|
DS DS/EN 474- 8 |
Earth-moving machinery - Safety - Part 8: Requirements for graders |
|
DS DS/EN 474- 9 |
Earth-moving machinery - Safety - Part 9: Requirements for pipelayers |
|
DS DS/EN 50374 |
Conductor cars |
|
DS DS/EN 528 |
Rail dependent storage and retrieval equipment - Safety |
|
DS DS/EN 528/A1 |
Rail dependent storage and retrieval equipment - Safety-(AMENDS DS/EN 528) |
|
DS DS/EN 60204- 32 |
Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
|
DS DS/EN 617 |
Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers |
|
DS DS/EN 618 |
Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors |
|
DS DS/EN 619 |
Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads |
|
DS DS/EN 620 |
Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials |
|
DS DS/EN 741 |
Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials |
|
DS DS/EN 818- 1 |
Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance |
|
DS DS/EN 818- 1/AC |
Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance |
|
DS DS/EN 818- 2 |
Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8 |
|
DS DS/EN 818- 3 |
Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4 |
|
DS DS/EN 818- 4 |
Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8 |
|
DS DS/EN 818- 5 |
Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4 |
|
DS DS/EN 818- 6 |
Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer |
|
DS DS/EN 818- 7 |
Short link chain for lifting puposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) |
|
DS DS/EN 873 |
Light conveyor belts - Principal characteristics and applications |
|
DS DS/EN ISO 1120 |
Conveyor belts - Determination of strength of mechanical fastenings - Static test method |
|
DS DS/EN ISO 14890 |
Conveyor belts - Specification for rubber or plastics covered conveyor belts of textile construction for general use |
|
DS DS/EN ISO 15147 |
Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts |
|
DS DS/EN ISO 15236- 1 |
Steel cord conveyor belts Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use |
|
DS DS/EN ISO 15236- 2 |
Steel cord conveyor belts - Part 2: Preferred belt types |
|
DS DS/EN ISO 15236- 4 |
Steel cord conveyor belts - Part 4: Vulcanized belt joints |
|
DS DS/EN ISO 21281 |
Construction and layout of pedals of self-propelled sit-down rider- controlled industrial trucks Rules for the construction and layout of pedals |
|
DS DS/EN ISO 252- 1 |
Textile conveyor belts - Adhesive strength between constitutive elements - Part 1: Methods of test |
|
DS DS/EN ISO 283- 1 |
Textile conveyor belts - Full thickness tensile testing - Part 1: Determination of tensile strength, elongation at break and elongation at the reference load |
|
DS DS/EN ISO 284 |
Conveyor belts - Electrical conductivity - Specification and test method |
|
DS DS/EN ISO 2860 |
Earth-moving machinery - Minimum access dimensions |
|
DS DS/EN ISO 2867 |
Earth-moving machinery - Access systems |
|
DS DS/EN ISO 3164 |
Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume |
|
DS DS/EN ISO 340 |
Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method |
|
DS DS/EN ISO 3411 |
Earth-moving machinery - Human physical dimensions of operators and minimum operator space envelope |
|
DS DS/EN ISO 3449 |
Earth-moving machinery Falling-object protective structures Laboratory tests and performance requirements |
|
DS DS/EN ISO 3450 |
Earth-moving machinery - Braking systems of rubber-tyred machines - Systems and performance requirements and test procedures |
|
DS DS/EN ISO 3457 |
Earth-moving machinery - Guards - Definitions and requirements |
|
DS DS/EN ISO 505 |
Conveyor belts - Method for the determination of the tear propagation resistance of textile conveyor belts |
|
DS DS/EN ISO 5353 |
Earth-moving machinery, and tractors and machinery for agriculture and forestry - Seat index point |
|
DS DS/EN ISO 583- 1 |
Conveyor belts with a textile carcass - Total thickness and thickness of elements - Part 1: Methods of test |
|
DS DS/EN ISO 6165 |
Earth-moving machinery - Basic types - Vocabulary |
|
DS DS/EN ISO 6682 |
Earth-moving machinery - Zones of comfort and reach for controls |
|
DS DS/EN ISO 6683 |
Earth-moving machinery - Seat belts and seat belt anchorages Performance requirements and tests |
|
DS DS/EN ISO 703- 1 |
Conveyor belts - Transverse flexibility and troughability - Part 1: Test method |
|
DS DS/EN ISO 7096 |
Earth-moving machinery - Laboratory evaluation of operator seat vibration |
|
DS DS/EN ISO 7096/AC |
Earth-moving machinery - Laboratory evaluation of operator seat vibration |
|
DS DS/EN ISO 7590 |
Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness |
|
DS DS/EN ISO 7622- 1 |
Steel cord conveyor belts - Longitudinal traction test - Part 1: Measurement of elongation |
|
DS DS/EN ISO 7622- 2 |
Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile strength |
|
DS DS/EN ISO 7623 |
Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment |
|
DS DS/EN ISO 9100- 10 |
Glass containers Vacuum lug finishes Part 10: 77 regular |
|
DS DS/EN ISO 9856 |
Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus |
|
DS DS/ENV 1993-4- 1 |
Eurocode 3: Design of steel structures - Part 4-1: Silos, tanks and pipelines - Silos |
|
DS DS/ENV 1993- 6 |
Eurocode 3: Design of steel structures - Part 6: Crane supporting structures |
|
DS DS/INF 8 |
Continuous mechanical handling equipment - Safety code for conveyors and elevators with chain elements - Examples for guarding of nip points |
|
DS DS/INSTA 250 |
Storage equipment - Pallet racks |
|
DS DS/INSTA 251 |
Storage equipment - Shelvings |
|
DS DS/INSTA 252 |
Storage equipment - Drive-in Racks |
|
DS DS/INSTA 253 |
Storage equipment - Cantilever Rack |
|
DS DS/ISO 1044 |
Industrial trucks - Traction batteries for electric trucks - Voltages |
|
DS DS/ISO 1074 |
Counterbalanced lift trucks - Stability - Basic tests |
|
DS DS/ISO 1084 |
Industrial tractors - Definition and nominal rating |
|
DS DS/ISO 2163 |
Industrial trucks - Wheels and castors - Vocabulary |
|
DS DS/ISO 2184 |
Industrial castors - Dimensions of top-plates - Part 1: Oblong top- plates with 4 bolt holes |
|
DS DS/ISO 2308 |
Hooks for lifting freight containers of up to 30 tonnes capacity - Basic requirements |
|
DS DS/ISO 2328 |
Fork lift trucks - Hook-on type fork arms and fork carriers - Mounting dimensions |
|
DS DS/ISO 2330 |
Fork lift trucks - Fork arms - Technical characteristics and testing |
|
DS DS/ISO 2331 |
Fork lift trucks - Hook-on type fork arms - Vocabulary |
|
DS DS/ISO 3101 |
Wheels and castors - Triangular top plates with three fixing holes |
|
DS DS/ISO 3102 |
Wheels and castors for non-powered equipment - Off-set for swivel castors |
|
DS DS/ISO 3287 |
Powered industrial trucks - Control symbols |
|
DS DS/ISO 6055 |
High lift trucks - Overhead guards - Specification and testing |
|
DS DS/ISO 6395 |
Acoustics - Measurement of exterior noise emitted by earthmoving machinery - Dynamic test conditions |
|
DS DS/ISO 6395/Amd.1 |
Acoustics - Measurement of exterior noise emitted by earth- moving machinery - Dynamic test conditions-(AMENDS DS/ISO 6395) |
|
DS DS/ISO 6396 |
Acoustics - Measurement at the operator´s position of noise emitted by earth-moving machinery - Dynamic test conditions |
|
DS DS/ISO 6500 |
Powered industrial trucks - Service brakes - Components strength - Performance requirements |
|
DS DS/R 2152 |
Truck - Terminology |