|
DS DS/CLC/R 009- 001 |
Railway applications - Communication, signalling and processing systems - Hazardous failure rates and Safety Integrity Levels (SIL) |
|
DS DS/CLC/R 009- 002 |
Railway applications - Guide for the use of the terminology for testing procedures |
|
DS DS/CLC/R 009- 003 |
Railways applications - Guide to the specification of a guided transport system |
|
DS DS/CLC/R 009- 004 |
Railway applications - Systematic allocation of safety integrity requirements |
|
DS DS/CLC/R 009- 005 |
Railway applications - Radio remote control system of traction vehicle for freight traffic in multiple traction operation |
|
DS DS/CLC/TS 45545- 5 |
Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles |
|
DS DS/CLC/TS 50459- 1 |
Railway applications Communication, signalling and processing systems European Rail Traffic Management System Driver-Machine Interface Part 1: Ergonomic principles for the presentation of ERTMS/ETCS/GSM-R-information |
|
DS DS/CLC/TS 50459- 2 |
Railway applications Communication, signalling and processing systems European Rail Traffic Management System Driver- Machine Interface Part 2: Ergonomic arrangements of ERTMS/ETCS information |
|
DS DS/CLC/TS 50459- 3 |
Railway applications Communication, signalling and processing systems European Rail Traffic Management System Driver- Machine Interface Part 3: Ergonomic arrangements of ERTMS/GSM-R information |
|
DS DS/CLC/TS 50459- 4 |
Railway applications Communication, signalling and processing systems European Rail Traffic Management System Driver- Machine Interface Part 4: Data entry for the ERTMS/ETCS/GSM-R systems |
|
DS DS/CLC/TS 50459- 5 |
Railway applications Communication, signalling and processing systems European Rail Traffic Management System Driver-Machine Interface Part 5: Symbols |
|
DS DS/CLC/TS 50459- 6 |
Railway applications Communication, signalling and processing systems European Rail Traffic Management System Driver-Machine Interface Part 6: Audible information |
|
DS DS/EN 12080 |
Railway applications - Axleboxes - Rolling bearings |
|
DS DS/EN 12081 |
Railway applications - Axleboxes - Lubricating greases |
|
DS DS/EN 12082 |
Railway applications - Axleboxes - Performance testing |
|
DS DS/EN 12397 |
Safety requirements for cableway installations designed to carry persons - Operation |
|
DS DS/EN 12408 |
Safety requirements for cableway installations designed to carry persons - Quality control |
|
DS DS/EN 12561- 1 |
Railway applications - Tank wagons - Part 1: Marking of tank wagons for the carriage of dangerous goods. |
|
DS DS/EN 12561- 2 |
Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return |
|
DS DS/EN 12561- 3 |
Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure |
|
DS DS/EN 12561- 4 |
Railway applications - Tank wagons - Part 4: Top devices for top emptying and filling of liquid products |
|
DS DS/EN 12561- 5 |
Railway applications - Tank wagons - Part 5: Top devices for bottom emptying and top filling of liquid products |
|
DS DS/EN 12561- 6 |
Railway applications - Tank wagons - Part 6: Manholes |
|
DS DS/EN 12561- 7 |
Railway applications - Tank wagons - Part 7: Platforms and ladders |
|
DS DS/EN 12561- 8 |
Railway applications - Tank wagons - Part 8: Heating connections |
|
DS DS/EN 12663 |
Railway applications - Structural requirements of railway vehicle bodies |
|
DS DS/EN 12927- 1 |
Safety requirements for cableway installations designed to carry persons - Ropes - Part 1: Selection criteria for ropes and their end fixings |
|
DS DS/EN 12927- 2 |
Safety requirements for cableway installations designed to carry persons - Ropes - Part 2: Safety factors |
|
DS DS/EN 12927- 3 |
Safety requirements for cableway installations designed to carry persons - Ropes - Part 3: Long splicing of 6 strand hauling, carrying-hauling and towing ropes |
|
DS DS/EN 12927- 4 |
Safety requirements for cableway installations designed to carry persons - Ropes - Part 4: End fixings |
|
DS DS/EN 12927- 5 |
Safety requirements for cableway installations designed to carry persons - Ropes - Part 5: Storage, transportation, installation and tensioning |
|
DS DS/EN 12927- 6 |
Safety requirements for cableway installations designed to carry persons - Ropes - Part 6: Discard criteria |
|
DS DS/EN 12927- 7 |
Safety requirements for cableway installations designed to carry persons - Ropes - Part 7: Inspection, repair and maintenance |
|
DS DS/EN 12927- 8 |
Safety requirements for cableway installations designed to carry persons - Ropes - Part 8: Magnetic rope testing (MRT) |
|
DS DS/EN 12929- 1 |
Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations |
|
DS DS/EN 12929- 2 |
Safety requirements for cableway installations designed to carry persons - General requirements - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes |
|
DS DS/EN 12930 |
Safety requirements for cableway installations designed to carry persons - Calculations |
|
DS DS/EN 12972 |
Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks |
|
DS DS/EN 13103 |
Railway applications - Wheelsets and bogies - Non-powered axles - Design method |
|
DS DS/EN 13104 |
Railway applications - Wheelsets and bogies - Powered axles - Design method |
|
DS DS/EN 13107 |
Safety requirements for cableway installations designed to carry persons - Civil engineering works |
|
DS DS/EN 13129- 1 |
Railway applications - Air conditioning for main line rolling stock - Part 1: Comfort parameters |
|
DS DS/EN 13129- 2 |
Railway applications - Air conditioning for main line rolling stock - Part 2: Type tests |
|
DS DS/EN 13145 |
Railway applications - Track - Wood sleepers and bearers |
|
DS DS/EN 13146- 1 |
Railway applications - Track - Test methods for fastening systems - Part 1: Determination of longitudinal rail restraint |
|
DS DS/EN 13146- 2 |
Railway applications - Track - Test methods for fastening systems - Part 2: Determination of torsional resistance |
|
DS DS/EN 13146- 3 |
Railway applications - Track - Test methods for fastening systems - Part 3: Determination of attenuation of impact loads |
|
DS DS/EN 13146- 4 |
Railway applications - Track - Test methods for fastening systems - Part 4: Effect of repeated loading |
|
DS DS/EN 13146- 5 |
Railway applications - Track - Test methods for fastening systems - Part 5: Determination of electrical resistance |
|
DS DS/EN 13146- 6 |
Railway applications - Track - Test methods for fastening systems - Part 6: Effect of severe environmental conditions |
|
DS DS/EN 13146- 7 |
Railway applications - Track - Test methods for fastening systems - Part 7: Determination of clamping force |
|
DS DS/EN 13146- 8 |
Railway applications - Track - Test methods for fastening systems - Part 8: In service testing |
|
DS DS/EN 13223 |
Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment |
|
DS DS/EN 13230- 1 |
Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements |
|
DS DS/EN 13230- 2 |
Railway applications - Track - Concrete sleepers and bearers - Part 2: Prestressed monoblock sleepers |
|
DS DS/EN 13230- 3 |
Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers |
|
DS DS/EN 13230- 4 |
Railway applications - Track - Concrete sleepers and bearers - Part 4: Prestressed bearers for switches and crossings |
|
DS DS/EN 13230- 5 |
Railway applications - Track - Concrete sleepers and bearers - Part 5: Special elements |
|
DS DS/EN 13232- 1 |
Railway applications - Track - Switches and crossings - Part 1: Definitions |
|
DS DS/EN 13232- 2 |
Railway applications - Track - Switches and crossings - Part 2: Requirements for geometric design |
|
DS DS/EN 13232- 3 |
Railway applications - Track - Switches and crossings - Part 3: Requirements for wheel/rail interaction |
|
DS DS/EN 13232- 4 |
Railway applications Track Switches and crossings Part 4: Actuation, locking and detection |
|
DS DS/EN 13232- 5 |
Railway applications Track Switches and crossings Part 5: Switches |
|
DS DS/EN 13232- 6 |
Railway applications Track Switches and crossings Part 6: Fixed common and obtuse crossings |
|
DS DS/EN 13243 |
Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems-Corrigendum:7/21/2005 |
|
DS DS/EN 13260 |
Railway applications - Wheelsets and bogies - Wheelsets - Product requirements |
|
DS DS/EN 13261 |
Railway applications - Wheelsets and bogies - Axles - Product requirements |
|
DS DS/EN 13262 |
Railway applications - Wheelsets and bogies - Wheels - Product requirement |
|
DS DS/EN 13272 |
Railway applications - Electrical lighting for rolling stock in public transport systems |
|
DS DS/EN 13298 |
Railway applications - Suspension components - Helical suspension springs, steel |
|
DS DS/EN 13452- 1 |
Railway applications - Braking - Mass transit brake systems - Part 1: Performance requirements |
|
DS DS/EN 13452- 2 |
Railway applications - Braking - Mass transit brake systems - Part 2: Methods of test |
|
DS DS/EN 13481- 1 |
Railway applications - Track - Performance requirements for fastening systems - Part 1: Definitions |
|
DS DS/EN 13481- 2 |
Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers |
|
DS DS/EN 13481- 3 |
Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers |
|
DS DS/EN 13481- 4 |
Railway applications - Track - Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers |
|
DS DS/EN 13481- 4/AC |
Railway applications - Track - Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers |
|
DS DS/EN 13481- 5 |
Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track |
|
DS DS/EN 13481- 7 |
Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossing and check rails |
|
DS DS/EN 13597 |
Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs |
|
DS DS/EN 13674- 1 |
Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above |
|
DS DS/EN 13775- 1 |
Railway applications - Measuring of new and modified freight wagons - Part 1: Measuring principles |
|
DS DS/EN 13775- 2 |
Railway applications - Measuring of new and modified freight wagons - Part 2: Freight wagons with bogies |
|
DS DS/EN 13775- 3 |
Railway applications - Measuring of new and modified freight wagons - Part 3: Freight wagons with 2 wheelsets |
|
DS DS/EN 13775- 4 |
Railway applications - Measuring of new and modified freight wagons - Part 4: Bogies with 2 wheelsets |
|
DS DS/EN 13775- 5 |
Railway applications - Measuring of new and modified freight wagons - Part 5: Bogies with 3 wheelsets |
|
DS DS/EN 13775- 6 |
Railway applications - Measuring of new and modified freight wagons - Part 6: Multiple and articulated freight wagons |
|
DS DS/EN 13796- 1 |
Safety requirements for cableway installations designed to carry persons Carriers Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers |
|
DS DS/EN 13796- 2 |
Safety requirements for cableway installations designed to carry persons Carriers Part 2: Slipping resistance test for grips |
|
DS DS/EN 13796- 3 |
Safety requirements for cableway installations designed to carry persons Carriers Part 3: Fatigue testings |
|
DS DS/EN 13802 |
Railway applications - Suspension components - Hydraulic dampers |
|
DS DS/EN 13848- 1 |
Railway applications/Track - Track geometry quality - Part 1: Characterisation of track geometry |
|
DS DS/EN 13913 |
Railway applications - Rubber suspension components - Elastomer- based mechanical parts |
|
DS DS/EN 13977 |
Railway applications Track Safety requirements for portable machines and trolleys for construction and maintenance |
|
DS DS/EN 13979- 1 |
Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1: Forged and rolled wheels |
|
DS DS/EN 14067- 1 |
Railway applications - Aerodynamics - Part 1: Symbols and units |
|
DS DS/EN 14067- 2 |
Railway applications - Aerodynamics - Part 2: Aerodynamics on open track |
|
DS DS/EN 14067- 3 |
Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels |
|
DS DS/EN 14200 |
Railway applications - Suspension components - Parabolic springs, steel |
|
DS DS/EN 14363 |
Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Testing of running behaviour and stationary tests |
|
DS DS/EN 14478 |
Railway applications Braking Generic vocabulary |
|
DS DS/EN 14601 |
Railway applications Straight and angled end cocks for brake pipe and main reservoir pipe |
|
DS DS/EN 1709 |
Safety requirements for cableway installations designed to carry persons - Precommissioning inspection, maintenance, operational inspection and checks |
|
DS DS/EN 1908 |
Safety requirements of cableway installations designed to carry persons - Tensioning devices |
|
DS DS/EN 1909 |
Safety requirements for cableway installations designed to carry persons - Recovery and evacuation |
|
DS DS/EN 286- 3 |
Simple unfired pressure vessels designed to contain air or nitrogen - Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
|
DS DS/EN 286- 4 |
Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic eguipment for railway rolling stock |
|
DS DS/EN 30326- 1 |
Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements |
|
DS DS/EN 50121- 1 |
Railway applications - Electromagnetic compatibility - Part 1: General |
|
DS DS/EN 50121- 2 |
Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world |
|
DS DS/EN 50121-3- 1 |
Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle |
|
DS DS/EN 50121-3- 2 |
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
|
DS DS/EN 50121- 4 |
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
|
DS DS/EN 50124- 1 |
Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment-Amendment 1:12/08/2003; Amendment 2: 06/30/2005 |
|
DS DS/EN 50124- 2 |
Railway applications - Insulation coordination - Part 2: Overvoltages and related protection |
|
DS DS/EN 50125- 1 |
Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock |
|
DS DS/EN 50126 |
Railway applications - The specification and demonstration of reliability, availability, maintainability and safety (RAMS) |
|
DS DS/EN 50128 |
Railway applications - Communications, signalling and processing systems - Software for railway control and protection systems |
|
DS DS/EN 50129 |
Railway applications - Communication, signalling and processing systems - Safety related electronic systems for signalling |
|
DS DS/EN 50153 |
Railway applications - Rolling stock - Protective provisions relating to electrical hazards |
|
DS DS/EN 50155 |
Railway applications - Electronic equipment used on rolling stock |
|
DS DS/EN 50155/A1 |
Railway applications - Electronic equipment used on rolling stock- (AMENDS DS/EN 50155) |
|
DS DS/EN 50159- 1 |
Railway applications - Communication, signalling and processing systems - Part 1: Safety-related communication in closed transmission systems |
|
DS DS/EN 50159- 2 |
Railway applications - Communication, signalling and processing systems - Part 2: Safety related communication in open transmission systems |
|
DS DS/EN 50206- 1 |
Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 1: Pantographs for main line vehicles |
|
DS DS/EN 50206- 2 |
Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 2: Pantographs for metros and light rail vehicles |
|
DS DS/EN 50206- 2/CORR. |
Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 2: Pantographs for metros and light rail vehicles |
|
DS DS/EN 50207 |
Railway applications - Electronic power converters for rolling stock |
|
DS DS/EN 50215 |
Railway applications - Testing of rolling stock after completion of construction and before entry into service |
|
DS DS/EN 50238 |
Railway applications - Compatibility between rolling stock and train detection systems |
|
DS DS/EN 50239 |
Railway applications - Radio remote control system of traction vehicle for freight traffic |
|
DS DS/EN 50261 |
Railway applications - Mounting of electronic equipment |
|
DS DS/EN 50264- 1 |
Railway applications - Railway rolling stock cables having special fire performance - Standard wall - Part 1: General requirements |
|
DS DS/EN 50264- 2 |
Railway applicactions - Railway rolling stock cables having special fire performance - Standard wall - Part 2: Single core cables |
|
DS DS/EN 50264- 3 |
Railway applicactions - Railway rolling stock cables having special fire performance - Standard wall - Part 3: Multicore cables |
|
DS DS/EN 50305 |
Railway applications - Railway rolling stock cables having special fire performance - Test methods |
|
DS DS/EN 50306- 1 |
Railway applications - Railway rolling stock cables having special fire performances - Thin wall - Part 1: General requirements |
|
DS DS/EN 50306- 2 |
Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 2: Single core cables |
|
DS DS/EN 50306- 3 |
Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 3: Single core and multicore cables (pairs, triples and quads) screened and thin wall sheathed |
|
DS DS/EN 50306- 4 |
Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 4: Multicore and multipair cables standard wall sheathed |
|
DS DS/EN 50311 |
Railway applications - Rolling stock - D.C. supplied electronic ballasts for lighting fluorescent lamps |
|
DS DS/EN 50343 |
Railway applications - Rolling stock - Rules for installation of cabling |
|
DS DS/EN 50355 |
Railway applications - Railway rolling stock cables having special fire performance - Thin wall and standard wall - Guide to use |
|
DS DS/EN 50388 |
Railway applications Power supply and rolling stock Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability |
|
DS DS/EN 60077- 1 |
Railway applications - Eletric equipment for rolling stock - Part 1: General service conditions and general rules |
|
DS DS/EN 60077- 2 |
Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules |
|
DS DS/EN 60077- 3 |
Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components - Rules for d.c. circuit-breakers |
|
DS DS/EN 60077- 4 |
Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical components - Rules for AC circuit-breakers |
|
DS DS/EN 60077- 5 |
Railway applications - Electrical equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV Fuses |
|
DS DS/EN 60310 |
Railway applications - Traction transformers and inductors on board rolling stock |
|
DS DS/EN 60322 |
Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction |
|
DS DS/EN 61373 |
Railway applications - Rolling stock equipment - Shock and vibration tests |
|
DS DS/EN 61377 + CORR. |
Electric traction - Rolling stock - Combined testing of inverter-fed alternating current motors and their control |
|
DS DS/EN 61377- 2 |
Railway applications - Rolling stock - Combined testing - Part 2: Chopper- fed direct current traction motors and their control |
|
DS DS/EN 61377- 3 |
Railway applications - Rolling stock - Part 3: Combined testing of alternating current motors, fed by and indirect convertor, and their control system |
|
DS DS/EN 61881 |
Railway applications - Rolling stock equipment - Capacitors for power electronics |
|
DS DS/EN ISO 3095 |
Railway applications Acoustics Measurement of noise emitted by railbound vehicles |
|
DS DS/EN ISO 3381 |
Railway applications Acoustics Measurement of noise inside railbound vehicles |
|
DS DS/ENV 12299 |
Railway applications - Ride comfort for passengers - Measurement and evaluation |
|
DS DS/ENV 13481- 6 |
Railway applications - Track - Performance requirements for fastening systems - Part 6: Special fastening systems for attenuation of vibration |
|
DS DS/ENV 13481- 6/AC |
Railway applications - Track - Performance requirements for fastening systems - Part 6: Special fastening systems for attenuation of vibration |
|
DS DS/ENV 1907 |
Safety requirements for passenger transportation by rope - Terminology |
|
DS DS/ENV 50121- 1 |
Railway applications - Electromagnetic compatibility - Part 1: General |
|
DS DS/ENV 50129 |
Railway applications - Safety related electronic systems for signalling |