|
DS DS/EN 29529- 2 |
Information processing systems - Data interchange on 90 mm (3,5 in) flexible disk cartridges using modified frequency modulation recording at 15916 ftprad, on 80 tracks on each side - Part 2: Track format |
|
DS DS/EN 29592- 1 |
Information processing systems - Computer graphics - Programmer´s Hierarchical Interactive Graphics System (PHIGS) - Part 1: Functional description |
|
DS DS/EN 29592- 2 |
Information processing systems - Computer graphics - Programmer´s Hierarchical Interactive Graphics System (PHIGS) - Part 2: Archive file format |
|
DS DS/EN 29592- 2/A1 |
Information processing systems - Computer graphics - Programmer´s Hierarchical Interactive Graphics System (PHIGS) - Part 2: Archive file format - Amendment 1-(AMENDS DS/EN 29592-2) |
|
DS DS/EN 29592- 3 |
Information processing systems - Computer graphics - Programmer´s Hierarchical Interactive Graphics System (PHIGS) - Part 3: Clear-text encoding of archive file |
|
DS DS/EN 29592- 3/A1 |
Information processing systems - Computer graphics - Programmer´s Hierarchical Interactive Graphics System (PHIGS) - Part 3: Clear-text encoding of archive file-(AMENDS DS/EN 29592-3) |
|
DS DS/EN 29735 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules |
|
DS DS/EN 29983 |
Information processing systems - Designation of unrecorded flexible disk cartridges |
|
DS DS/EN 41102 |
Information Systems Interconnection - Local Area Networks - provision of the OSI Connection-mode Transport Service using the OSI Connectionless-mode Network Service in an End System attached to a CSMA/CD LAN |
|
DS DS/EN 50116 |
Information technology equipment - Routine electrical safety testing in production |
|
DS DS/EN 50325- 1 |
Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 1: General requirements |
|
DS DS/EN 50325- 2 |
Industrial comunications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 2: DeviceNet |
|
DS DS/EN 50325- 3 |
Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 3: Smart Distributed System (SDS) |
|
DS DS/EN 50325- 4 |
Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 4: CANopen |
|
DS DS/EN 55022 |
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement-Corrigendum: 10/14/2005; Amendment 1 and 2:11/02/2005 |
|
DS DS/EN 55024 |
Information technology equipment - Immunity characteristics - Limits and methods of measurement |
|
DS DS/EN 55024/A1 |
Information technology equipment - Immunity characteristics - Limits and methods of measurement-(AMENDS DS/EN 55024) |
|
DS DS/EN 55024/A2 |
Information technology equipment - Immunity characteristics - Limits and methods of measurement-(AMENDS DS/EN 55024) |
|
DS DS/EN 606 |
Bar coding Transport and handling labels for steel products |
|
DS DS/EN 60821 |
IEC 821 VMEbus - Microprocessor system bus for 1 byte to 4 byte data |
|
DS DS/EN 60848 |
GRAFCET specification language for sequential function charts |
|
DS DS/EN 60950 |
Safety of information technology equipment-Includes CD Rom (SIK) |
|
DS DS/EN 60950- 1 |
Information technology equipment - Safety - Part 1: General requirements |
|
DS DS/EN 60950- 1/A11 |
Information technology equipment - Safety - Part 1: General requirements-(AMENDS DS/EN 60950-1) |
|
DS DS/EN 60950- 1/CORR. |
Information technology equipment - Safety - Part 1: General requirements |
|
DS DS/EN 60950- 1/CORR.1 |
Information technology equipment - Safety - Part 1: General requirements |
|
DS DS/EN 60950- 21+CORR.1 |
Information technology equipment - Safety - Part 21: Remote power feeding |
|
DS DS/EN 60990 |
Methods of measurement of touch current and protective conductor current |
|
DS DS/EN 61131- 1 |
Programmable controllers - Part 1: General information |
|
DS DS/EN 61131- 2 |
Programmable controllers - Part 2: Equipment requirements and test |
|
DS DS/EN 61131- 3 |
Programmable controllers - Part 3: Programming languages |
|
DS DS/EN 61131- 5 |
Programmable controllers - Part 5: Communications |
|
DS DS/EN 61131- 7 |
Programmable controllers - Part 7: Fuzzy control programming |
|
DS DS/EN 61158- 2 |
Digital data communications for measurement and control Fieldbus for use in industrial control systems Part 2: Physical layer specification and service definition |
|
DS DS/EN 61158- 3 |
Digital data communication for measurement and control Fieldbus for use in industrial control systems Part 3 : Data link service definition |
|
DS DS/EN 61158- 4 |
Digital data communication for measurement and control Fieldbus for use in industrial control systems Part 4: Data link protocol specification |
|
DS DS/EN 61158- 5 |
Digital data communication for measurement and control Fieldbus for use in industrial control systems Part 5: Application layer service definition |
|
DS DS/EN 61158- 6 |
Digital data communication for measurement and control Fieldbus for use in industrial control systems Part 6: Application layer protocol specification-Supersedes DS/EN 50170:1997, DS/EN 50170/A3:2002, DS/EN 50170/A1:2002, DS/EN 50170/A2:2000, and DS E |
|
DS DS/EN 61286 |
Information technology - Coded graphic character set for use in the preparation of documents used in electrotechnology and for information interchange |
|
DS DS/EN 61491 |
Electrical equipment of industrial machines - Serial data link for real- time communication between controls and drives |
|
DS DS/EN 61523- 1 |
Delay and power calculation standards - Part 1: Integrated circuit delay and power calculation systems |
|
DS DS/EN 61523- 2 |
Delay and power calculation standards - Part 2: Pre-layout delay calculation specification for CMOS ASIC libraries |
|
DS DS/EN 61690- 1 |
Electronic Design Interchange Format (EDIF) - Part 1: Version 3 0 0 |
|
DS DS/EN 61690- 2 |
Electronic Design Interchange Format (EDIF) - Part 2: Version 4 0 0 |
|
DS DS/EN 61691- 2 |
Behavioural languages - Part 2: VHDL multilogic system for model interoperability |
|
DS DS/EN 61691-3- 2 |
Behavioural languages - Part 3-2: Mathematical operation in VHDL |
|
DS DS/EN 61691-3- 3 |
Behavioural Languages - Part 3-3: Synthesis in VHDL |
|
DS DS/EN 61784- 1 |
Digital data communications for measurement and control Part 1: Profile sets for continuous and discrete manufacturing relative to fieldbus use in industrial control systems |
|
DS DS/EN 61883- 1 |
Consumer audio/video equipment - Digital interface - Part 1: General |
|
DS DS/EN 61883- 2 |
Consumer audio/video equipment - Digital interface - Part 2: SD-DVCR data transmission |
|
DS DS/EN 61883- 3 |
Consumer audio/video equipment - Digital interface - Part 3: HD-DVCR data transmission |
|
DS DS/EN 61883- 4 |
Consumer audio/video equipment - Digital interface - Part 4: MPEG2-TS data transmission |
|
DS DS/EN 61883- 5 |
Consumer audio/video equipment - Digital interface - Part 5: SDL-DVCR data transmission |
|
DS DS/EN 61883- 7 |
Consumer audio/video equipment - Digital interface - Part 7: Transmission of ITU-R BO.1294 System B |
|
DS DS/EN 61926- 1 |
Design automation - Part 1: Standard test language for all systems - Common abbreviated test language for all systems (C/ATLAS) |
|
DS DS/EN 62014- 1 |
Electronic design automation libraries - Part 1: Input/Output buffer information specifications (IBIS Version 3.2) |
|
DS DS/EN 62018 |
Power consumption of information technology equipment - Measurement methods |
|
DS DS/EN 726- 1 |
Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 1: System overview |
|
DS DS/EN 726- 2 |
Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 2: Security framework |
|
DS DS/EN 726- 3 |
Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 3: Application independent card requirements |
|
DS DS/EN 726- 4 |
Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 4: Application independent card related terminal requirements |
|
DS DS/EN 726- 5 |
Identification card system - Telecommunications integrated circut(s) cards and terminals - Part 5: Payment methods |
|
DS DS/EN 726- 6 |
Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 6: Telecommunication features |
|
DS DS/EN 726- 7 |
Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 7: Security module |
|
DS DS/EN 753- 1 |
Identification card systems - Intersector thin flexible cards - Part 1: General technical specifications |
|
DS DS/EN 753- 2 |
Identification card systems - Intersector thin flexible cards - Part 2: Magnetic recording technique |
|
DS DS/EN 753- 3 |
Identification card systems - Intersector thin flexible cards - Part 3: Test methods |
|
DS DS/EN 798 |
Bar coding - Symbology specifications - "Codabar" |
|
DS DS/EN 841 |
Bar coding - Symbology specifications - Format description |
|
DS DS/EN ISO 10373 |
Identification cards - Test methods |
|
DS DS/EN ISO 11073- 10101 |
Health informatics Point-of-care medical device communication Part 10101: Nomenclature |
|
DS DS/EN ISO 11073- 10201 |
Health informatics Point-of-care medical device communication Part 10201: Domain information model |
|
DS DS/EN ISO 11073- 20101 |
Health informatics Point-of-care medical device communication Part 20101: Application profiles Base standard |
|
DS DS/EN ISO 11073- 30200 |
Health informatics Point-of-care medical device communication Part 30200: Transport profile Cable connected |
|
DS DS/EN ISO 11073- 30300 |
Health informatics Point-of-care medical device communication Part 30300: Transport profile Infrared wireless |
|
DS DS/EN ISO 11442- 1 |
Technical product documentation - Handling of computer-based technical information - Part 1: Security requirements |
|
DS DS/EN ISO 11442- 2 |
Technical product documentation - Handling of computer-based technical information - Part 2: Original documentation |
|
DS DS/EN ISO 11442- 4 |
Technical product documentation - Handling of computer-based technical information - Part 4: Document management and retrieval systems |
|
DS DS/EN ISO 128- 21 |
Technical drawings - General principles of presentation - Part 21: Preparation of lines by CAD-systems |
|
DS DS/EN ISO 13406- 1 |
Ergonomic requirements for work with visual displays based on flat panels - Part 1: Introduction |
|
DS DS/EN ISO 13406- 2 |
Ergonomic requirements for work with visual displays based on flat panels - Part 2: Ergonomic requirements for flat panel displays |
|
DS DS/EN ISO 13567- 1 |
Technical product documentation - Organization and naming of layers for CAD - Part 1: Overview and principles |
|
DS DS/EN ISO 13567- 2 |
Technical product documentation - Organization and naming of layers for CAD - Part 2: Concepts, format and codes used in construction documentation |
|
DS DS/EN ISO 14815 |
Road transport and traffic telematics Automatic vehicle and equipment identification System specifications-Replaces DS/ENV ISO 14815:2000 |
|
DS DS/EN ISO 14819- 1 |
Traffic and Travel Information (TTI) - TTI Messages via traffic message coding - Part 1: Coding protocol for Radio Data System - Traffic Message Channel (RDS- TMC) using ALERT-C |
|
DS DS/EN ISO 14819- 1/AC |
Traffic and Travel Information (TTI) - TTI Messages via traffic message coding - Part 1: Coding protocol for Radio Data System - Traffic Message Channel (RDS-TMC) using ALERT-C |
|
DS DS/EN ISO 14819- 2 |
Traffic and Traveller Information (TTI) - TTI Messages via traffic message coding - Part 2: Event and information codes for Radio Data System - Traffic Message Channel (RDS-TMC) |
|
DS DS/EN ISO 14819- 3 |
Traffic and Travel Information (TTI) - TTI messages via traffic message coding - Part 3: Location referencing for ALERT-C |
|
DS DS/EN ISO 14825 |
Intelligent transport systems - Geographic Data Files (GDF) - Overall data specification |
|
DS DS/EN ISO 14906 |
Road transport and traffic telematics - Electronic fee collection - Application interface definition for dedicated short-range communication |
|
DS DS/EN ISO 14915- 1 |
Software ergonomics for multimedia user interfaces - Part 1: Design principles and framework |
|
DS DS/EN ISO 14915- 2 |
Software ergonomics for multimedia user interfaces - Part 2: Multimedia navigation and control |
|
DS DS/EN ISO 14915- 3 |
Software ergonomics for multimedia user interfaces - Part 3: Media selection and combination |
|
DS DS/EN ISO 15438 |
Information technology - Automatic identification and data capture technicques - Bar code symbology specifications |
|
DS DS/EN ISO 18104 |
Health informatics - Integration of a reference terminology model for nursing |
|
DS DS/EN ISO 18812 |
Health informatics - Clinical analyser interfaces to laboratory information systems - Use profiles |
|
DS DS/EN ISO 19101 |
Geographic information Reference model |
|
DS DS/EN ISO 19105 |
Geographic information Conformance and testing |
|
DS DS/EN ISO 19107 |
Geographic information Spatial schema |
|
DS DS/EN ISO 19108 |
Geographic information Temporal schema |
|
DS DS/EN ISO 19111 |
Geographic information Spatial referencing by coordinates |
|
DS DS/EN ISO 19112 |
Geographic information Spatial referencing by geographic identifiers |
|
DS DS/EN ISO 19113 |
Geographic information Quality principles |
|
DS DS/EN ISO 19115 |
Geographic information Metadata |
|
DS DS/EN ISO 21549- 1 |
Health informatics - Patient healthcard data - Part 1: General structure |
|
DS DS/EN ISO 21549- 2 |
Health informatics - Patient healthcard data - Part 2: Common objects |
|
DS DS/EN ISO 21549- 3 |
Health informatics - Patient healthcard data - Part 3: Limited clinical data |
|
DS DS/EN ISO 3098- 5 |
Technical product documentation - Lettering - Part 5: CAD lettering of the Latin alphabet, numerals and marks |
|
DS DS/EN ISO 7779 |
Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment |
|
DS DS/EN ISO 7779/A1 |
Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment - Amendment 1: Noise measurement specification for CD/DVD-ROM drives-(AMENDS DS/EN ISO 7779) |
|
DS DS/EN ISO 9241- 1 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 1: General introduction |
|
DS DS/EN ISO 9241- 1/A1 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 1: General introduction-(AMENDS DS/EN ISO 9241-1) |
|
DS DS/EN ISO 9241- 10 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 10: Dialogue principles |
|
DS DS/EN ISO 9241- 11 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 11: Guidance on usability |
|
DS DS/EN ISO 9241- 12 |
Ergonomic requirements for office work with visual display terminals (VDT´s) - Part 12: Presentation of information |
|
DS DS/EN ISO 9241- 13 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 13: User guidance |
|
DS DS/EN ISO 9241- 14 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 14: Menu dialogues |
|
DS DS/EN ISO 9241- 15 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 15: Command dialogues |
|
DS DS/EN ISO 9241- 16 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 16: Direct manipulation dialogues |
|
DS DS/EN ISO 9241- 17 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 17: Form filling dialogues |
|
DS DS/EN ISO 9241- 4 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 4: Keyboard requirements |
|
DS DS/EN ISO 9241- 4/AC |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 4: Keyboard requirements |
|
DS DS/EN ISO 9241- 5 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 5: Workstation layout and postural requirements |
|
DS DS/EN ISO 9241- 6 |
Ergonomic requirements for office work with visual display terminals (VDT´s) - Part 6: Guidance on the work environment |
|
DS DS/EN ISO 9241- 7 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 7: Requirements for display with reflections |
|
DS DS/EN ISO 9241- 8 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 8: Requirements for displayed colours |
|
DS DS/EN ISO 9241- 9 |
Ergonomic requirements for office work with visual display terminals (VDT´s) - Part 9: Requirements for non-keyboard input devices |
|
DS DS/EN ISO/IEC 11172-1 |
Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s - Part 1: Systems |
|
DS DS/EN ISO/IEC 11172-2 |
Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s - Part 2: Video |
|
DS DS/EN ISO/IEC 11172-3 |
Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s - Part 3: Audio |
|
DS DS/EN ISO/IEC 11172-4 |
Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s - Part 4: Compliance testing |
|
DS DS/EN ISO/IEC 13818-1 |
Information technology - Generic coding of moving pictures and associated audio information - Part 1: Systems |
|
DS DS/EN ISO/IEC 13818- 1/Amd.1,2 |
Information technology - Generic coding of moving pictures and associated audio information: Systems - Amendment 1: Registration procedure for "copyright identifier" - Amendment 2: Registration procedure for "format identifier"-(AMENDS DS/EN ISO/IEC 13818 |
|
DS DS/EN ISO/IEC 13818-1/Amd.3 |
Information technology - Generic coding of moving pictures and associated audio information: Systems - Amendment 3: Private data identification- (AMENDS DS/EN ISO/IEC 13818-1) |
|
DS DS/EN ISO/IEC 13818-1/Amd.4 |
Information technology - Generic coding of moving pictures and associated audio information: Systems - Amendment 4-(AMENDS DS/EN ISO/IEC 13818-1) |
|
DS DS/EN ISO/IEC 13818- 1/Amd.5 |
Information technology - Generic coding of moving pictures and associated audio information: Systems-(AMENDS DS/EN ISO/IEC 13818-1) |
|
DS DS/EN ISO/IEC 13818-1/Amd.6 |
Information technology - Generic coding of moving pictures and associated audio information: Systems-(AMENDS DS/EN ISO/IEC 13818-1) |
|
DS DS/EN ISO/IEC 13818-1/COR.1 |
Information technology - Generic coding of moving pictures and associated audio information: Systems |
|
DS DS/EN ISO/IEC 13818- 9 |
Information technology - Generic coding of moving pictures and associated audio information - Part 9: Extension for real time interface for systems decoders |
|
DS DS/EN ISO/IEC 15415 |
Information technology Automatic identification and data capture techniques Bar code print quality test specification Two-dimensional symbols |
|
DS DS/EN ISO/IEC 15416 |
Informations technology - Automatic identification and data capture techniques - Bar code print quality test specifications - Linear symbols |
|
DS DS/EN ISO/IEC 15419 |
Information technology - Automatic identification and data capture techniques - Bar code digital imaging and printing performance testing |
|
DS DS/EN ISO/IEC 15421 |
Information technology - Automatic identification and data capture techniques - Bar code master test specifications |
|
DS DS/EN ISO/IEC 15423 |
Information technology Automatic identification and data capture techniques Bar code scanner and decoder performance testing-Replaces DS/ISO/IEC 15423:2004 and DS/ENV 12646:1997 |
|
DS DS/EN ISO/IEC 7487- 1 |
Information technology - Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 1,9 tpmm (48 tpi), on both sides - ISO type 202 - Part 1: Dimensional, physical and magnetic characterist |
|
DS DS/EN ISO/IEC 7810 |
Identification cards - Physical characteristics |
|
DS DS/EN ISO/IEC 7811- 1 |
Identification cards - Recording technique - Part 1: Embossing |
|
DS DS/EN ISO/IEC 7811- 3 |
Identification cards - Recording technique - Part 3: Location of embossed characters on ID-1 cards |
|
DS DS/EN ISO/IEC 7816- 5 |
Identification cards - Integrated circuit(s) cards with contacts - Part 5: Numbering system and registration procedure for application identifiers |
|
DS DS/EN ISO/IEC 8072 |
Information technology - Open Systems Interconnection - Transport service definition |
|
DS DS/EN ISO/IEC 9314- 3 |
Information processing systems - Fibre Distributed Data Interface (FDDI) - Part 3: Physical Layer Medium Dependent (PMD) |
|
DS DS/EN ISO/IEC 9945- 2 |
Information technology - Portable Operating System Interface (POSIX) - Part 2: Shell and utilities |
|
DS DS/EN ISP 10608- 6 |
Information technology - International Standardized Profile TAnnnn - Connection-mode Transport Service over Connectionless-mode Network Service - Part 6: Definition of profile TA54, operation over an FDDI LAN subnetwork |
|
DS DS/EN ISP 10612- 1 |
Information technology - International Standardized Profile RD - Relaying the MAC service using transparent bridging - Part 1: Subnetwork-independent requirements |
|
DS DS/EN ISP 10612- 3 |
Information technology - International Standardized Profile RD - Relaying the MAC service using transparent bridging - Part 3: Token Ring LAN subnetwork-dependent, media-dependent requirements |
|
DS DS/EN ISP 10612- 4 |
Information technology - International Standardized Profile RD - Relaying the MAC service using transparent bridging - Part 4: Profile RD.51.51 (CSMA/CD LAN - CSMA/CD LAN) |
|
DS DS/EN ISP 10612- 5 |
Information technology - International Standardized Profile RD - Relaying the MAC service using transparent bridging - Part 5: Profile RD51.54 (CSMA/CD LAN - FDDI LAN) |
|
DS DS/EN ISP 10612- 6 |
Information technology - International Standardized Profile RD - Relaying the MAC service using transparent bridging - Part 6: Profile RD54.54 (FDDI LAN -FDDI LAN) |
|
DS DS/EN ISP 10612- 7 |
Information technology - International Standardized Profile RD - Relaying the MAC service using transparent bridging. Part 7 : Profile RD51.53 (CSMA/CD LAN - Token Ring LAN) |
|
DS DS/EN ISP 10612- 8 |
Information technology - International Standardized Profile RD - Relaying the MAC service using transparent bridging - Part 8 : Profile RD53.53 (Token Ring LAN - Token Ring LAN) |
|
DS DS/EN ISP 10612- 9 |
Information technology - International Standardized Profile RD - Realying the MAC service using transparent bridging - Part 9 : Profile RD53.54 (Token Ring LAN - FDDI LAN) |
|
DS DS/EN ISP 10613- 1 |
Information technology - International Standardized Profile RA - Relaying the Connectionless-mode Network Service - Part 1: Subnetwork-independent requirements |
|
DS DS/EN ISP 10613- 6 |
Information technology - International standardized profile RA - Relaying the Connectionless-mode Network Service - Part 6: Definition of profile RA51.54, relaying the connectionless-mode network service between CSMA/CD LAN subnetworks and FDDI LAN Subnet |
|
DS DS/EN ISP 10613- 7 |
Information technology - International Standardized Profile RA - Relaying the Connectionless-mode Network Service - Part 7: PSDN subnetwork-dependent, media- dependent requirements for virtual calls over a permanent access |
|
DS DS/EN ISP 11185- 1 |
Information technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of control object type definitions - Part 1: FVT211, FVT212 - Sequenced and Unsequenced Application Control Objects |
|
DS DS/EN ISP 11185- 10 |
Information technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of control object type definitions - Part 10: FVT231 - Forms FEPCO (Field Entry Pilot Control Object) No.1 |
|
DS DS/EN ISP 11185- 11 |
Information technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of control object type definitions - Part 11: FVT232 - Paged FEPCO (Field Entry Pilot Control Object) No.1 |
|
DS DS/EN ISP 11185- 2 |
Information technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of control object type definitions - Part 2: FVT213, FVT214 - Sequenced and Unsequenced Terminal Control Objects |
|
DS DS/EN ISP 11185- 3 |
Information technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of control object type definitions - Part 3: FVT215, FVT216 - Application RIO Record Loading Control Object, Terminal RIO Record Notification Con |
|
DS DS/EN ISP 11185- 4 |
Information technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of control object type definitions - Part 4: FVT217 - Horizontal Tabulation Control Object |
|
DS DS/EN ISP 11185- 5 |
Information technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of control object type definitions - Part 5: FVT218 - Logical Image Control Object |
|
DS DS/EN ISP 11185- 6 |
Information technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of control object type definitions - Part 6: FVT219 - Status Message Control Object |
|
DS DS/EN ISP 11185- 7 |
Information technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of control object type definitions - Part 7: FVT2110 - Entry-Control Control Object |
|
DS DS/EN ISP 11185- 8 |
Information technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of control object type definitions - Part 8: FVT221 - Forms FEICO (Field Entry Instruction Control Object) No.1 |
|
DS DS/EN ISP 11185- 9 |
Information technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of control object type definitions - Part 9: FVT222 - Paged FEICO (Field Entry Instruction Control Object) No.1 |
|
DS DS/EN ISP 11190 |
Information technology - International Standardized Profile FDI3 - Directory data definitions - FTAM Use of the Directory |
|
DS DS/EN ISP 12061- 1 |
Information technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction Processing Part 1: Introduction to the Transaction Processing Profiles |
|
DS DS/EN ISP 12061- 10 |
Information technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction Processing Part 10: Provider supported chained transactions - Shared Control (ATP32) |
|
DS DS/EN ISP 12061- 2 |
Information technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction Processing - Part 2: Support of OSI TP APDUs |
|
DS DS/EN ISP 12061- 3 |
Information technology - Open Systems Interconnection International Standardized Profiles: OSI Distributed Transaction Processing Part 3: Support of CCR APDUs |
|
DS DS/EN ISP 12061- 4 |
Information technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction Processing Part 4: Support of session, Presentation and ACSE PDUs |
|
DS DS/EN ISP 12061- 5 |
Information technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction Processing - Part 5: Application supported transactions - Polarized control (ATP11) |
|
DS DS/EN ISP 12061- 6 |
Information technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction Processing Part 6: Application supported transactions - Shared control (ATP12) |
|
DS DS/EN ISP 12061- 7 |
Information technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction Processing - Part 7: Provider supported unchained transactions - Polarized control (ATP21) |
|
DS DS/EN ISP 12061- 8 |
Information technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction Processing Part 8: Provider supported unchained transactions - Shared control (ATP22) |
|
DS DS/EN ISP 12061- 9 |
Information technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction Processing Part 9: Provider supported chained transactions - Polarized control (ATP31) |
|
DS DS/EN ISP 12064- 1 |
Information technology - International Standardized Profile FOD112 - Open Document Format: Image Applications - Simple Document Structure - Raster Graphics content architecture - Part 1: Document Application Profile (DAP) |
|
DS DS/EN ISP 12068- 1 |
Information technology - International Standardized Profile FDI4 - Directory data definitions - Use of directory for OSI TP - Part 1: FDI 41 - Basic naming and addressing |
|
DS DS/EN ISP 12068- 2 |
Information technology - International Standardized Profile FDI4 - Directory data definitions - Use of directory for OSI TP - Part 2: FDI42 - Enhanced naming and addressing |
|
DS DS/EN ISP 15124- 1 |
Information technology - International Standardized Profile FOD126 - Open Document Format: Image Applications - Enhanced document structure - Character, raster graphics, and geometric graphics content architecture - Part 1: Document Application Profile (D |
|
DS DS/ENV 1064 |
Medical Informatics - Standard communication protocol - Computer- assisted electrocardiography |
|
DS DS/ENV 1068 |
Medical Informatics - Healthcare information interchange - Registration of coding schemes |
|
DS DS/ENV 12005 |
Information Technology - Procedures for European Registration of Cultural Elements |
|
DS DS/ENV 12018 |
Identification, administrative and common clinical data structure for Intermittently Connected Devices used in healtcare (including machine readable cards) |
|
DS DS/ENV 12204 |
Advanced Manufacturing Technology - Systems Architecture - Constructs for Enterprise Modelling |
|
DS DS/ENV 12313- 4 |
Traffic and Traveller Information (TTI) - TTI Messages via Traffic Message Coding - Part 4: Coding Protocol for Radio Data System - Traffic Message Channel (RDS- TMC) - RDS-TMC using ALERT Plus with ALERT C |
|
DS DS/ENV 12381 |
Health care informatics - Time standards for healthcare specific problems |
|
DS DS/ENV 12388 |
Medical informatics - Algorithm for Digital Signature Services in Health Care |
|
DS DS/ENV 12435 |
Medical informatics - Expression of results of measurements in health sciences |
|
DS DS/ENV 12443 |
Medical Informatics - Healthcare Information Framework (HIF) |
|
DS DS/ENV 12537- 2 |
Medical informatics - Registration of information objects used for EDI in healthcare - Part 2: Procedures for the registration of information objects used for electronic data interchange (EDI) in healthcare |
|
DS DS/ENV 12538 |
Medical informatics - Messages for patient referral and discharge |
|
DS DS/ENV 1257- 1 |
Identification card systems - Rules for Personal Identification Number handling in intersector environments - Part 1: PIN presentation |
|
DS DS/ENV 1257- 2 |
Identification card systems - Rules for Personal Identification Number handling in intersector environments - Part 2: PIN protection |
|
DS DS/ENV 1257- 3 |
Identification card systems - Rules for Personal Identification Number handling in intersector environments - Part 3: PIN verification |
|
DS DS/ENV 12610 |
Medical informatics - Medicinal product identification |
|
DS DS/ENV 12612 |
Medical informatics - Messages for the exchange of healthcare administrative information |
|
DS DS/ENV 12647 |
Bar Coding - Test Specifications for Bar Code Verifiers |
|
DS DS/ENV 12656 |
Geographic information - Data description - Quality |
|
DS DS/ENV 12657 |
Geographic information - Data description - Metadata |
|
DS DS/ENV 12658 |
Geographic information - Data description - Transfer |
|
DS DS/ENV 12661 |
Geographic information - Referencing - Geographic identifiers |
|
DS DS/ENV 12762 |
Geographic information - Referencing - Direct position |
|
DS DS/ENV 12796 |
Road transport and traffic telematics - Public transport - Validators |
|
DS DS/ENV 1284 |
Identification card systems - Intersector rules for locking and unlocking of integrated circuit(s) cards |
|
DS DS/ENV 1285 |
Information processing - Techniques for using SGML - Application for European Standards |
|
DS DS/ENV 12896 |
Road Transport and Traffic Telematics - Public Transport - Reference Data Model |
|
DS DS/ENV 12924 |
Medical Informatics - Security Categorisation and Protection for Healthcare Information Systems |
|
DS DS/ENV 12967- 1 |
Medical informatics - Healthcare Information System Architecture (HISA) - Part 1: Healthcare Middleware Layer |
|
DS DS/ENV 13106 |
Road transport and traffic telematics - DATEX traffic and travel data dictionary (version 3.1a) |
|
DS DS/ENV 13154- 1 |
Data communication for HVAC application - Field net - Part 1: Objects |
|
DS DS/ENV 13154- 2 |
Data communication for HVAC application field net - Part 2: Protocols |
|
DS DS/ENV 13321- 1 |
Data communication for HVAC application automation net - Part 1: BACnet, Profibus, World FIP |
|
DS DS/ENV 13321- 2 |
Data communication for HVAC application - Automation net - Part 2: EIBnet |
|
DS DS/ENV 13376 |
Geographic information - Data description - Rules for application schemas |
|
DS DS/ENV 13550 |
Advanced Manufacturing Technology - Systems Architecture - Enterprise Model Execution and Integration Services |
|
DS DS/ENV 13606- 1 |
Health informatics - Electronic healthcare record communication - Part 1: Extended architecture |
|
DS DS/ENV 13606- 2 |
Health informatics - Electronic healthcare record communication - Part 2: Domain term list |
|
DS DS/ENV 13606- 3 |
Health informatics - Electronic healthcare record communication - Part 3: Distribution rules |
|
DS DS/ENV 13606- 4 |
Health informatics - Electronic healthcare record communication - Part 4: Messages for the exchange of information |
|
DS DS/ENV 13607 |
Health informatics - Messages for the exchange of information on medicine prescriptions |
|
DS DS/ENV 13608- 1 |
Health informatics - Security for healthcare communication - Part 1: Concepts and terminology |
|
DS DS/ENV 13608- 2 |
Health informatics - Security for healthcare communication - Part 2: Secure data objects |
|
DS DS/ENV 13608- 3 |
Health informatics - Security for healthcare communication - Part 3: Secure data channels |
|
DS DS/ENV 13609- 2 |
Health informatics - Messages for maintenance of supporting information in healthcare systems - Part 2: Updating of medical laboratory-specific information |
|
DS DS/ENV 13710 |
European Ordering Rules - Ordering of characters from the Latin, Greek and Cyrillic scripts |
|
DS DS/ENV 13729 |
Health informatics - Secure user identification - Strong authentication using microprocessor cards |
|
DS DS/ENV 13730- 1 |
Health informatics - Blood transfusion related messages - Part 1: Subject of care related massages |
|
DS DS/ENV 13730- 2 |
Healthcare Informatics - Blood transfusion related messages - Part 2: Production related messages |
|
DS DS/ENV 13734 |
Health informatics - Vital signs information representation |
|
DS DS/ENV 13735 |
Health informatics - Interoperability of patient connected medical devices |
|
DS DS/ENV 13777 |
Road transport and traffic telematics - DATEX specifications for data exchange between trafic and travel information centres (version 1.2a) |
|
DS DS/ENV 13940 |
Health informatics - System of concepts to support continuity of care |
|
DS DS/ENV 14014 |
Postal services - Hybrid mail - Document type definitions for customers to operator: a common set of default tags |
|
DS DS/ENV 14062- 1 |
Identification card systems - Surface transport applications - Electronic fee collection - Part 1: Physical characteristics, electronic signals and transmission protocols |
|
DS DS/ENV 14062- 2 |
Identification card systems - Surface transport applications - Electronic fee collection - Part 2: Message requirements |
|
DS DS/ENV 1545- 1 |
Identification card systems - Surface transport applications - Part 1: General data elements |
|
DS DS/ENV 1545- 2 |
Identification card systems - Surface transport applications - Part 2: Transport payment related data elements |
|
DS DS/ENV 1613 |
Medical informatics - Messages for exchange of laboratory information |
|
DS DS/ENV 1614 |
Healthcare informatics - Structure for nomenclature, classification, and coding of properties in clinical laboratory sciences |
|
DS DS/ENV 1855 |
Identification card systems - Intersector integrated circuit(s) card systems - Tolerance ranges for IC cards |
|
DS DS/ENV 1973 |
Information Technology - European Subsets of ISO/IEC 10646- 1 |
|
DS DS/ENV 41113 |
Information technology - Functional standard for profiles T/C 4311 and T/D 4311 - ISDN (Public/Private) - Packet mode service - D-channel - Virtual call (VC) |
|
DS DS/ENV 41115 |
Information technology - Functional standard for profiles T/C31 and T/D31 - Analogue telephone circuit - Leased (permanent) service (COTS + CONS) |
|
DS DS/ENV 41116 |
Information technology - Functional standard for profiles T/C32 and T/32 - Analogue telephone circuit - Dial-up (PSTN) (COTS + CONS) |
|
DS DS/ENV 41217 |
Information Technology - Functional standard for Profile A/DI31 - Directory - Behaviour of DUAs for distributed operations |
|
DS DS/ENV 41218 |
Information technology - Functional standard for profile A/MH12 - Message Handling Systems (1988 and later) - Common facilities - UA to MS |
|
DS DS/ENV 41219 |
Information technology - Functional standard for profile A/MH13 - Message Handling Systems (1988 and later) - Common facilities - UA or MS to MTA (P3) |
|
DS DS/ENV 41220 |
Information technology - Functional standard for profile A/MH31 - Message Handling Systems (1988 and later) - Electronic data interchange messaging service (EDIMS) - EDIM end system to EDIM end system (P EDI & P1) |
|
DS DS/ENV 41901 |
Information technology - Functional standard for profiles Y/11 and Y/12 - Character mode terminals on PAD - X.29 over X.25 and X.28 (PSDN character mode access) |
|
DS DS/ENV 50208- 6 |
Data Interchange format for Simulated and Measured Data (ISMD) |
|
DS DS/ENV 606 |
Barcoded transport and handling labels for steel products |
|
DS DS/ENV ISO 14816 |
Road transport and traffic telematics - Automatic vehicle and equipment identification - Numbering and data structures |
|
DS DS/ENV ISO 14904 |
Road transport and traffic telematics - Electronic fee collection (EFC) - Interface specification for clearing between operators |
|
DS DS/ENV ISO 14907- 1 |
Road Transport and Traffic Telematics (RTTT) - Electronic Fee Collection (EFC) - Test procedures for user and fixed equipment - Part 1: Description of test procedures |
|
DS DS/ES 59011 |
Specification for the representation of Quality rules and metrics for Hardware and Software Design Languages |
|
DS DS/HD 40001 |
Information systems interconnection - Combinations of reference documents for the elaboration of Functional Standards |
|
DS DS/IEC 62264- 1 |
Enterprise-control system integration - Part 1: Models and terminology |
|
DS DS/IEC 62264- 2 |
Enterprise-control system integration Part 2: Object model attributes |
|
DS DS/IEC/PAS 62405 |
Real-time Ethernet Vnet/IPTM specification |
|
DS DS/IEC/PAS 62407 |
Real-time Ethernet control automation technology (EtherCATTM) |
|
DS DS/IEC/PAS 62408 CD-ROM |
Real-time Ethernet Powerlink (EPL) |
|
DS DS/IEC/TR 1131- 4 |
Programmable controllers - Part 4: User guidelines |
|
DS DS/IEC/TR 61131- 4 |
Programmable controllers Part 4: User guidelines |
|
DS DS/IEC/TR 61131- 8 |
Programmable controllers - Part 8: Guidelines for the application and implementation of programming languages |
|
DS DS/IEC/TR 62102 |
Electrical safety - Classification of interfaces for equipment to be connected to information and communications technology networks |
|
DS DS/IEC/TR 62266 |
Medical electrical equipment - Guidelines for implementation of DICOM in radiotherapy |
|
DS DS/IEC/TR 62390 |
Common automation device Profile guideline |
|
DS DS/IEC/TS 62393 |
Portable and hand-held multimedia equipment Mobile computers Battery run-time measurement |
|
DS DS/INF 102/RET.1 |
Excerpts from DS/ISO/IEC 10646-1:1995 - Information technology - Universal Multiple-Octet Coded Character Set (UCS) - Part 1: Architecture and Basic Multilingual Plane |
|
DS DS/INF 18 |
An introduction to open systems interconnection |
|
DS DS/INF 2000 |
Guidelines for certification of electronic web sites - Requirements for design and maintenance |
|
DS DS/INF 34 |
Work stations with visual display units - Analysis, design, etc. |
|
DS DS/INF 36 |
Report on a principal model for Computer Integrated Manufacturing |
|
DS DS/INF 46 |
European initiatives on standardization within the area of information technology |
|
DS DS/INF 48 |
SGML & ODA - Standards for Documents Processing and Interchange |
|
DS DS/INF 55 |
Guide to the use of ISO 9127 |
|
DS DS/INF 56 |
Approved commentaries on the Basic Reference Model for Open Systems Interconnection |
|
DS DS/INF 61 |
Computer integrated manufacturing - Systems architecture - Framework for Enterprise Modelling |
|
DS DS/INF 63 |
Guidelines for the preparation of conformity clauses in programming language standards |
|
DS DS/INF 72 |
Technical report - Information technology - SGML and Text-entry Systems - Guidelines for SGML Syntax-Directed Editing Systems |
|
DS DS/INF 73 |
Information technology - SGML support facilities - Techniques for using SGML - Part 13: Public entity sets for mathematics and science |
|
DS DS/INF 84 |
Nordic Cultural Requirements on Information Technology |
|
DS DS/INF 89 |
Digital Components Catalogues |
|
DS DS/INF 99 |
Investigation of syntaxes for existing interchange formats to be used in healthcare |
|
DS DS/ISO 10160/Amd.1 |
Information and documentation - Open Systems Interconnection - Interlibrary Loan Application Service Definition - Amendment 1: Addition of annex D acknowledging the National Library of Canada as the Maintenance Agency-(AMENDS DS/ISO 10160) |