|
DS DS/EN 60079- 1 |
Electrical apparatus for explosive gas atmospheres - Part 1: Flameproof enclosures "d" |
|
DS DS/EN 60079-10 (SIK) |
Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
|
DS DS/EN 60079- 14 |
Electrical apparatus for explosive gas atmospheres - Part 14: Electrical installations in hazardous areas (other than mines) |
|
DS DS/EN 60079- 14 |
Electrical apparatus for explosive gas atmospheres - Part 14: Electrical installations in hazardous areas (other than mines) |
|
DS DS/EN 60079- 15 |
Electrical apparatus for explosive gas atmospheres - Part 15: Type of protection "n" |
|
DS DS/EN 60079- 15+CD-ROM (SIK) |
Electrical apparatus for explosive gas atmospheres - Part 15: Type of protection "n" |
|
DS DS/EN 60079- 17 |
Electrical apparatus for explosive gas atmospheres - Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines) |
|
DS DS/EN 60079-17 (SIK) |
Electrical apparatus for explosive gas atmospheres - Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines) |
|
DS DS/EN 60079- 2 |
Electrical apparatus for explosive gas atmospheres - Part 2: Pressurized enclosures "p" |
|
DS DS/EN 60079- 25 |
Electrical apparatus for explosive gas atmospheres - Part 25: Intrinsically safe systems |
|
DS DS/EN 60079-25 (SIK) |
Electrical apparatus for explosive gas atmospheres - Part 25: Intrinsically safe systems |
|
DS DS/EN 60079- 7 |
Electrical apparatus for explosive gas atmospheres - Part 7: Increased safety "e"-Corrigendum: 08/17/2005 |
|
DS DS/EN 60081 |
Double-capped fluorescent lamps - Performance specifications |
|
DS DS/EN 60081/A1 |
Double-capped fluorescent lamps - Performance specifications- (AMENDS DS/EN 60081) |
|
DS DS/EN 60081/A2 |
Double-capped fluorescent lamps - Performance specifications- (AMENDS DS/EN 60081) |
|
DS DS/EN 60086- 1 |
Primary batteries - Part 1: General |
|
DS DS/EN 60086- 2 |
Primary batteries - Part 2: Physical and electrical specifications |
|
DS DS/EN 60086- 2/A1 |
Primary batteries - Part 2: Physical and electrical specifications- (AMENDS DS/EN 60086-2) |
|
DS DS/EN 60086- 3 |
Primary batteries - Part 3: Watch batteries |
|
DS DS/EN 60086- 4 |
Primary batteries - Part 4: Safety standard for lithium batteries |
|
DS DS/EN 60086- 5 |
Primary batteries - Part 5: Safety of batteries with aqueous electrolyte |
|
DS DS/EN 60095-2 + A11 |
Lead-acid starter batteries - Part 2: Dimensions of batteries and dimensions and marking of terminals |
|
DS DS/EN 60095-4 + A11 |
Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy commercial vehicles |
|
DS DS/EN 60099- 1+A1 |
Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems |
|
DS DS/EN 60099- 4 |
Surge arresters Part 4: Metal-oxide surge arresters without gaps for a.c. systems |
|
DS DS/EN 60099- 5 |
Surge arresters - Part 5: Selection and application recommendations |
|
DS DS/EN 60099- 5/A1 |
Surge arresters - Part 5: Selection and application recommendations- (AMENDS DS/EN 60099-5) |
|
DS DS/EN 60110- 1 |
Power capacitors for induction heating installations - Part 1: General |
|
DS DS/EN 60112 |
Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
|
DS DS/EN 60112/CORR.1 |
Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
|
DS DS/EN 60127- 1/A2 |
Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links-(AMENDS DS/EN 60127-1+A1) |
|
DS DS/EN 60127- 1+A1 |
Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links |
|
DS DS/EN 60127- 10 |
Miniature fuses - Part 10: User guide for miniature fuses |
|
DS DS/EN 60127- 2 |
Miniature fuses - Part 2: Cartridge fuse-links |
|
DS DS/EN 60127- 2/A1 |
Miniature fuses - Part 2: Cartridge fuse-links-(AMENDS DS/EN 60127- 2) |
|
DS DS/EN 60127- 3/A2 |
Miniature fuses - Part 3: Sub-miniature fuse-links-(AMENDS DS/EN 60127-3+Corr.) |
|
DS DS/EN 60127- 3+CORR. |
Miniature fuses - Part 3: Sub-miniature fuse-links |
|
DS DS/EN 60127- 4 |
Miniature fuses - Part 4: Universal Modular Fuse-links (UMF) Through- hole and surface mount types |
|
DS DS/EN 60127- 6/A2 |
Miniature fuses - Part 6: Fuse-holders for miniature fuse-links- (AMENDS DS/EN 60127-6+A1) |
|
DS DS/EN 60129 + A1,2 |
Alternating current disconnectors and earthing switches |
|
DS DS/EN 60133 |
Dimensions of pot-cores made of magnetic oxides and associated parts |
|
DS DS/EN 60137 |
Insulated bushings for alternating voltages above 1 000 V |
|
DS DS/EN 60146-1- 1+A1 |
Semiconductor convertors - General requirements and line commutated convertors - Part 1-1: Specifications of basic requirements |
|
DS DS/EN 60146- 2 |
Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c. converters |
|
DS DS/EN 60156 |
Insulating liquids - Determination of the breakdown voltage at power frequency - Test method |
|
DS DS/EN 60168/A2 |
Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1 kV-(AMENDS DS/EN 60168) |
|
DS DS/EN 60172 |
Test procedure for the determination of the temperature index of enamelled winding wires |
|
DS DS/EN 60172/A1 |
Test procedure for the determination of the temperature index of enamelled winding wires-(AMENDS DS/EN 60172) |
|
DS DS/EN 60188 |
High-pressure mercury vapour lamps - Performance specifications |
|
DS DS/EN 60192 |
Low-pressure sodium vapour lamps - Performance specifications |
|
DS DS/EN 60204- 1 |
Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
|
DS DS/EN 60204- 1/CORR. |
Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
|
DS DS/EN 60204- 11 |
Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV |
|
DS DS/EN 60205 |
Calculation of the effective parameters of magnetic piece parts |
|
DS DS/EN 60205/CORR.1 |
Calculation of the effective parameters of magnetic piece parts |
|
DS DS/EN 60214- 1 |
Tap-changers - Part 1: Performance requirements and test methods |
|
DS DS/EN 60216- 1 |
Electrical insulating materials - Properties of thermal endurance - Part 1: Ageing procedures and evaluation of test results |
|
DS DS/EN 60216- 3 |
Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics |
|
DS DS/EN 60216- 3/CORR.1 |
Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics |
|
DS DS/EN 60216-3- 2 |
Guide for the determination of thermal endurance properties of electrical insulating materials - Part 3: Instructions for calculating thermal endurance characteristics - Section 2: Calculations for incomplete data: proof test results up to and including t |
|
DS DS/EN 60216-4- 2 |
Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens - Precision ovens for use up to 300 øC |
|
DS DS/EN 60216-4- 3 |
Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens - Multi-chamber ovens |
|
DS DS/EN 60216- 5 |
Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material |
|
DS DS/EN 60216- 6 |
Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method |
|
DS DS/EN 60230 |
Impulse tests on cables and their accessories |
|
DS DS/EN 60238 |
Edison screw lampholders |
|
DS DS/EN 60243- 1 |
Electrical strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
|
DS DS/EN 60243- 2 |
Electrical strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage |
|
DS DS/EN 60243- 3 |
Electrical strength of solid insulating materials -Test methods - Part 3: Additional requirements for 1,2/50 æs impulse tests |
|
DS DS/EN 60247 |
Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan phi) and d.c. resistivity |
|
DS DS/EN 60254- 1 |
Lead acid traction batteries Part 1: General requirements and methods of tests |
|
DS DS/EN 60254- 2/A1 |
Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells-(AMENDS DS/EN 60254-2) |
|
DS DS/EN 60255-21- 1 |
Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 1: Vibration tests (sinusoidal) |
|
DS DS/EN 60255-21- 2 |
Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 2: Shock and bump tests |
|
DS DS/EN 60255-21- 3 |
Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 3: Seismic tests |
|
DS DS/EN 60255-22- 2 |
Electrical relays - Part 22: Electrical disturbance tests for measuring relays and protection equipment - Section 2: Electrostatic discharge tests |
|
DS DS/EN 60255-22- 3 |
Electrical relays - Part 22-3: Electrical disturbance tests for measuring relays and protection equipment - Radiated electromagnetic field disturbance tests |
|
DS DS/EN 60255-22- 4 |
Electrical relays - Part 22-4: Electrical disturbance tests for measuring relays and protection equipment - Electrical fast transient/burst immunity test |
|
DS DS/EN 60255-22- 5 |
Electrical relays - Part 22-5: Electrical disturbance tests for measuring relays and protection equipment - Surge immunity test |
|
DS DS/EN 60255-22- 6 |
Electrical relays - Part 22-6: Electrical disturbance tests for measuring relays and protection equipment - Immunity to conducted disturbances induced by radio frequency fields |
|
DS DS/EN 60255-22- 7 |
Electrical relays - Part 22-7: Electrical disturbance tests for measuring relays and protection equipment - Power frequency immunity tests |
|
DS DS/EN 60255- 24 |
Electrical relays - Part 24: Common format for transient data exchange (COMTRADE) for power systems |
|
DS DS/EN 60255- 25 |
Electrical relays - Part 25: Electromagnetic emission tests for measuring relays and protection equipment |
|
DS DS/EN 60255- 3+CORR. |
Electrical relays - Part 3: Single input energizing quantity measuring relays with dependent or independent time |
|
DS DS/EN 60255- 5 |
Electrical relays - Part 5: Insulation coordination for measuring relays and protection equipment - Requirerments and tests |
|
DS DS/EN 60255- 6+CORR. |
Electrical relays - Part 6: Measuring relays and protection equipment |
|
DS DS/EN 60255- 8 |
Electrical relays - Part 8: Thermal electrical relays |
|
DS DS/EN 60265- 1 |
High-voltage Part 1: Switches for rated voltages above 1 kV and less than 52 kV |
|
DS DS/EN 60265-2 + A1 |
High-voltage switches - Part 2: High-voltage switches for rated voltages of 52 kV and above |
|
DS DS/EN 60265- 2/A2 |
High-voltage switches - Part 2: High-voltage switches for rated voltages of 52 kV and above-(AMENDS DS/EN 60265-2 + A1) |
|
DS DS/EN 60269- 1 |
Low-voltage fuses - Part 1: General requirements-Amendment 1: 04/01/2005 |
|
DS DS/EN 60269- 2 |
Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) |
|
DS DS/EN 60269- 2/A1 |
Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)-(AMENDS DS/EN 60269- 2) |
|
DS DS/EN 60269- 2/A2 |
Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)-(AMENDS DS/EN 60269- 2) |
|
DS DS/EN 60269- 3 |
Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) |
|
DS DS/EN 60269- 3/A1 |
Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications)-(AMENDS DS/EN 60269-3) |
|
DS DS/EN 60269-4 + A1 |
Low voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices |
|
DS DS/EN 60269- 4/A2 |
Low voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices-(AMENDS DS/EN 60269-4 + A1) |
|
DS DS/EN 60269-4- 1+CORR. |
Low-voltage fuses - Part 4-1: Supplementary requirements for fuse-links for the protection of semiconductor devices - Sections I to III: Examples of types of standardized fuse-links |
|
DS DS/EN 60276 |
Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings |
|
DS DS/EN 60282- 1 |
High-voltage fuses - Part 1: Current-limiting fuses |
|
DS DS/EN 60282- 1+A1 |
High-voltage fuses - Part 1: Current-limiting fuses |
|
DS DS/EN 60289+A11 |
Reactors |
|
DS DS/EN 60296 |
Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
|
DS DS/EN 60296/CORR. |
Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
|
DS DS/EN 60298 |
A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
|
DS DS/EN 60309- 1 |
Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements-Amendment 11: 07/16/2004 |
|
DS DS/EN 60309- 2 |
Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories- Amendment 11: 07/16/2004 |
|
DS DS/EN 60317-0- 1 |
Specifications for particular types of winding wires - Part 0: General requirements - Section 1: Enamelled round copper wire |
|
DS DS/EN 60317-0- 1/A1 |
Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire-(AMENDS DS/EN 60317-0-1) |
|
DS DS/EN 60317-0- 2 |
Specifications for particular types of winding wires - Part 0-2: General requirements - Enamelled rectangular copper wire-Amendments 1 & 2; |
|
DS DS/EN 60317-0- 3 |
Specifications for particular types of winding wires - Part 0: General requirements - Section 3: Enamelled round aluminium wire-Amendment 1: 08/18/2000; Amendment 2: 02/07/2005 |
|
DS DS/EN 60317-0- 4 |
Specifications for particular types of winding wires - Part 0: General requirements - Section 4: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire |
|
DS DS/EN 60317-0- 4/A1 |
Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire-(AMENDS DS/EN 60317-0-4) |
|
DS DS/EN 60317-0- 5/A1 |
Specifications for particular types of winding wires - Part 0: General requirements - Section 5: Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire-(AMENDS DS/EN 60317-0-5) |
|
DS DS/EN 60317-0- 5/A2 |
Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire-(AMENDS DS/EN 60317-0-5) |
|
DS DS/EN 60317-0- 6 |
Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire |
|
DS DS/EN 60317- 1/A1 |
Specifications for particular types of winding wires - Part 1: Polyvinyl acetal enamelled round copper wire, class 105-(AMENDS DS/EN 60317-1) |
|
DS DS/EN 60317- 1/A2 |
Specifications for particular types of winding wires - Part 1: Polyvinyl acetal enamelled round copper wire, class 105-(AMENDS DS/EN 60317-1) |
|
DS DS/EN 60317- 11 |
Specifications for particular types of winding wires - Part 11: Bunched solderable polyurethane enamelled round copper wires, class 130, with silk covering |
|
DS DS/EN 60317- 12/A1 |
Specifications for particular types of winding wires - Part 12: Polyvinyl acetal enamelled round copper wire, class 120-(AMENDS DS/EN 60317-12) |
|
DS DS/EN 60317- 13 |
Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200 |
|
DS DS/EN 60317- 13/A1 |
Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200-(AMENDS DS/EN 60317-13) |
|
DS DS/EN 60317- 13/A2 |
Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200-(AMENDS DS/EN 60317-13) |
|
DS DS/EN 60317- 15/A1 |
Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180-(AMENDS DS/EN 60317- 15) |
|
DS DS/EN 60317- 16/A1 |
Specifications for particular types of winding wires - Part 16: Polyester enamelled rectangular copper wire, class 155-(AMENDS DS/EN 60317-16) |
|
DS DS/EN 60317- 18/A1 |
Specifications for particular types of winding wires - Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120-(AMENDS DS/EN 60317-18) |
|
DS DS/EN 60317- 19/A1 |
Specifications for particular types of winding wires - Part 19: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130- (AMENDS DS/EN 60317-19) |
|
DS DS/EN 60317- 19/A2 |
Specifications for particular types of winding wires - Part 19: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130- (AMENDS DS/EN 60317-19) |
|
DS DS/EN 60317- 2 |
Specifications for particular types of winding wires - Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer |
|
DS DS/EN 60317- 2/A1 |
Specifications for particular types of winding wires - Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer-(AMENDS DS/EN 60317-2) |
|
DS DS/EN 60317- 2/A2 |
Specifications for particular types of winding wires - Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer-(AMENDS DS/EN 60317-2) |
|
DS DS/EN 60317- 20 |
Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155 |
|
DS DS/EN 60317- 20/A1 |
Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155-(AMENDS DS/EN 60317- 20) |
|
DS DS/EN 60317- 20/A2 |
Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155-(AMENDS DS/EN 60317- 20) |
|
DS DS/EN 60317- 21 |
Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155 |
|
DS DS/EN 60317- 21/A1 |
Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155- (AMENDS DS/EN 60317-21) |
|
DS DS/EN 60317- 21/A2 |
Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155- (AMENDS DS/EN 60317-21) |
|
DS DS/EN 60317- 22/A1 |
Specifications for particular types of winding wires - Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180-(AMENDS DS/EN 60317-22) |
|
DS DS/EN 60317- 23/A1 |
Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180-(AMENDS DS/EN 60317- 23) |
|
DS DS/EN 60317- 23/A2 |
Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180-(AMENDS DS/EN 60317- 23) |
|
DS DS/EN 60317- 24/A1 |
Specifications for particular types of winding wires - Part 24: Polyester or polyesterimide enamelled round aluminium wire overcoated with polyamide, class 180-(AMENDS DS/EN 60317-24) |
|
DS DS/EN 60317- 25 |
Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200 |
|
DS DS/EN 60317- 25/A1 |
Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200-(AMENDS DS/EN 60317-25) |
|
DS DS/EN 60317- 25/A2 |
Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200-(AMENDS DS/EN 60317-25) |
|
DS DS/EN 60317- 26/A1 |
Specifications for particular types of winding wires Part 26: Polyamide-imide enamelled round copper wire, class 200-(AMENDS DS/EN 60317- 26) |
|
DS DS/EN 60317- 27 |
Specifications for particular types of winding wires - Part 27: Paper tape covered rectangular copper wire |
|
DS DS/EN 60317- 27/A1 |
Specifications for particular types of winding wires - Part 27: Paper tape covered rectangular copper wire-(AMENDS DS/EN 60317-27) |
|
DS DS/EN 60317- 28 |
Specifications for particular types of winding wires Part 28: Polyesterimide enamelled rectangular copper wire, class 180 |
|
DS DS/EN 60317- 28/A1 |
Specifications for particular types of winding wires Part 28: Polyesterimide enamelled rectangular copper wire, class 180-(AMENDS DS/EN 60317- 28) |
|
DS DS/EN 60317- 29/A1 |
Specifications for particular types of winding wires - Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200-(AMENDS DS/EN 60317-29) |
|
DS DS/EN 60317- 3/A1 |
Specifications for particular types of winding wires - Part 3: Polyester enamelled round copper wire, class 155-(AMENDS DS/EN 60317-3) |
|
DS DS/EN 60317- 30/A1 |
Specifications for particular types of winding wires - Part 30: Polyimide enamelled rectangular copper wire, class 220-(AMENDS DS/EN 60317- 30) |
|
DS DS/EN 60317- 31 |
Specifications for particular types of winding wires - Part 31: Glass-fibre wound, polyester or polyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature index 180 |
|
DS DS/EN 60317- 31/A1 |
Specifications for particular types of winding wires Part 31: Glass- fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180-(AMENDS DS/EN 60317-31) |
|
DS DS/EN 60317- 32 |
Specifications for particular types of winding wires - Part 32: Glass-fibre wound, polyester or polyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature index 155 |
|
DS DS/EN 60317- 32/A1 |
Specifications for particular types of winding wires - Part 32: Glass- fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155-(AMENDS DS/EN 60317-32) |
|
DS DS/EN 60317- 33/A1 |
Specifications for particular types of winding wires - Part 33: Glass- fibre wound, silicone varnished-treated, bare or enamelled rectangular copper wire, temperature index 200-(AMENDS DS/EN 60317-33) |
|
DS DS/EN 60317- 35 |
Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer |
|
DS DS/EN 60317- 35/A1 |
Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer- (AMENDS DS/EN 60317-35) |
|
DS DS/EN 60317- 35/A2 |
Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer- (AMENDS DS/EN 60317-35) |
|
DS DS/EN 60317- 36 |
Specifications for particular types of winding wires - Part 36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer |
|
DS DS/EN 60317- 36/A1 |
Specifications for particular types of winding wires - Part 36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer- (AMENDS DS/EN 60317-36) |
|
DS DS/EN 60317- 36/A2 |
Specifications for particular types of winding wires - Part 36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer- (AMENDS DS/EN 60317-36) |
|
DS DS/EN 60317- 37 |
Specifications for particular types of winding wires - Part 37: Polyesterimide enamelled round copper wire, class 180, with a bonding layer |
|
DS DS/EN 60317- 37/A1 |
Specifications for particular types of winding wires - Part 37: Polyesterimide enamelled round copper wire, class 180, with a bonding layer-(AMENDS DS/EN 60317-37) |
|
DS DS/EN 60317- 37/A2 |
Specifications for particular types of winding wires - Part 37: Polyesterimide enamelled round copper wire, class 180, with a bonding layer-(AMENDS DS/EN 60317-37) |
|
DS DS/EN 60317- 38 |
Specifications for particular types of winding wire - Part 38: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200, with a bonding layer |
|
DS DS/EN 60317- 38/A1 |
Specifications for particular types of winding wire - Part 38: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200, with a bonding layer-(AMENDS DS/EN 60317-38) |
|
DS DS/EN 60317- 38/A2 |
Specifications for particular types of winding wires - Part 38: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200, with a bonding layer-(AMENDS DS/EN 60317-38) |
|
DS DS/EN 60317- 39/A1 |
Specifications for particular types of winding wires - Part 39: Glass- fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180-(AMENDS DS/EN 60317-39) |
|
DS DS/EN 60317- 4/A1 |
Specifications for particular types of winding wires - Part 4: Solderable polyurethane enamelled round copper wire, class 130-(AMENDS DS/EN 60317-4) |
|
DS DS/EN 60317- 4/A2 |
Specifications for particular types of winding wires - Part 4: Solderable polyurethane enamelled round copper wire, class 130-(AMENDS DS/EN 60317-4) |
|
DS DS/EN 60317- 40/A1 |
Specifications for particular types of winding wires - Part 40: Glass- fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200-(AMENDS DS/EN 60317-40) |
|
DS DS/EN 60317- 43 |
Specifications for particular types of winding wires - Part 43: Aromatic polyimide tape wrapped round copper wire, class 240 |
|
DS DS/EN 60317- 44 |
Specifications for particular types of winding wires - Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240 |
|
DS DS/EN 60317- 45 |
Specification for particular types of winding wires - Part 45: Polyester enamelled round copper wire, class 130 |
|
DS DS/EN 60317- 48 |
Specification for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 |
|
DS DS/EN 60317- 49 |
Specifications for particular types of winding wires - Part 49: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 |
|
DS DS/EN 60317- 50 |
Specifications for particular types of winding wires - Part 50: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 |
|
DS DS/EN 60317- 51 |
Specifications for particular types of winding wires - Part 51: Solderable polyurethane enamelled round copper wire, Class 180 |
|
DS DS/EN 60317- 52 |
Specifications for particular types of winding wires - Part 52: Aromatic polyamide (aramid) tape wrapped round copper wire, temperature index 220 |
|
DS DS/EN 60317- 53 |
Specifications for particular types of winding wires - Part 53: Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220 |
|
DS DS/EN 60317- 7/A1 |
Specifications for particular types of winding wires - Part 7: Polyimide enamelled round copper wire, class 220-(AMENDS DS/EN 60317-7) |
|
DS DS/EN 60317- 7/A2 |
Specifications for particular types of winding wires - Part 7: Polyimide enamelled round copper wire, class 220-(AMENDS DS/EN 60317-7) |
|
DS DS/EN 60317- 8/A1 |
Specifications for particular types of winding wires - Part 8: Polyesterimide enamelled round copper wire, class 180-(AMENDS DS/EN 60317-7) |
|
DS DS/EN 60317- 8/A2 |
Specifications for particular types of winding wires - Part 8: Polyesterimide enamelled round copper wire, class 180-(AMENDS DS/EN 60317-8) |
|
DS DS/EN 60320- 1 |
Appliance couplers for household and similar general purposes - Part 1: General requirements |
|
DS DS/EN 60320-2- 1 |
Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers |
|
DS DS/EN 60320-2- 2 |
Appliance couplers for household and similar general purposes - Part 2-2: Interconnection couplers for household and similar equipment |
|
DS DS/EN 60320-2- 3 |
Appliance couplers for household and similar general purposes - Part 2: Appliance couplers with a degree of protection higher than IPXO-Amendment 1: 7/19/2005 |
|
DS DS/EN 60332-1- 1 |
Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus |
|
DS DS/EN 60332-1- 2 |
Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame |
|
DS DS/EN 60332-1- 3 |
Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles |
|
DS DS/EN 60332-2- 1 |
Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus |
|
DS DS/EN 60332-2- 2 |
Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame |
|
DS DS/EN 60349- 1 |
Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors |
|
DS DS/EN 60349- 1/A1 |
Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors- (AMENDS DS/EN 60349-1) |
|
DS DS/EN 60349- 2 |
Railway applications - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating current motors |
|
DS DS/EN 60352-2 + A1 |
Solderless connections - Part 2: Solderless crimped connections - General requirements, test methods and practical guidance |
|
DS DS/EN 60352- 2/A2 |
Solderless connections - Part 2: Solderless crimped connections - General requirements, test methods and practical guidance-(AMENDS DS/EN 60352-2 + A1) |
|
DS DS/EN 60357/CORR. |
Tungsten halogen lamps (non-vehicle) - Performance specifications |
|
DS DS/EN 60360 |
Standard method of measurement of lamp cap temperature rise |
|
DS DS/EN 60360/CORR. |
Standard method of measurement of lamp cap temperature rise |
|
DS DS/EN 60371- 1 |
Specification for insulating materials based on mica - Part 1: Definitions and general requirements |
|
DS DS/EN 60371- 2 |
Specification for insulating materials based on mica - Part 2: Methods of test |
|
DS DS/EN 60372 |
Locking devices for ball and socket couplings of string insulator units - Dimensions and tests |
|
DS DS/EN 60375 |
Conventions concerning electric and magnetic circuits |
|
DS DS/EN 60383- 1/A11 |
Insulators for overhead lines with a nominal voltage above 1 kV - Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria-(AMENDS DS/EN 60383-1) |
|
DS DS/EN 60383- 2 |
Insulators for overhead lines with a nominal voltage above 1 000 V - Part 2: Insulator strings and insulator sets for a.c. systems - Definitions, test methods and acceptance criteria |
|
DS DS/EN 60399/A2 |
Standard sheets for barrel thread for E14 and E27 lampholders with shade holder ring-(AMENDS DS/EN 60399) |
|
DS DS/EN 60400 |
Lampholders for tubular fluorescent lamps and starterholders |
|
DS DS/EN 60400/A1 |
Lampholders for tubular fluorescent lamps and starterholders- (AMENDS DS/EN 60400) |
|
DS DS/EN 60400/A1/CORR. |
Lampholders for tubular fluorescent lamps and starterholders |
|
DS DS/EN 60401- 1 |
Terms and nomenclature for cores made of magnetically soft ferrites Part 1: Terms used for physical irregularities |
|
DS DS/EN 60401- 2 |
Terms and nomenclature for cores made of magnetically soft ferrites - Part 2: Reference of dimensions |
|
DS DS/EN 60401- 3 |
Terms and nomenclature for cores made of magnetically soft ferrites - Part 3: Guidelines on the format of data appearing in manufacturers´ catalogues of transformer and inductor cores |
|
DS DS/EN 60404- 14 |
Magnetic materials - Part 14: Methods of measurement of the magnetic dipole moment of ferromagnetic material specimen by the withdrawal or rotation method |
|
DS DS/EN 60404- 2 |
Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame |
|
DS DS/EN 60404- 4/A1 |
Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials-(AMENDS DS/EN 60404-4) |
|
DS DS/EN 60404- 6 |
Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens |
|
DS DS/EN 60424- 1 |
Ferrite cores - Guide on the limits of surface irregularities - Part 1: General specification |
|
DS DS/EN 60424- 3 |
Ferrit cores - Guide on the limits of surface irregularities - Part 3: ETD- cores and E-cores |
|
DS DS/EN 60424- 4 |
Ferrite cores - Guide on the limits of surface irregularities - Part 4: Ring- cores |
|
DS DS/EN 60427 |
Synthetic testing of high-voltage alternating current circuit- breakers |
|
DS DS/EN 60431/A2 |
Dimensions of square cores (RM-cores) made of magnetic oxides and associated parts-(AMENDS DS/EN 60431) |
|
DS DS/EN 60432- 1 |
Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes-Amendment 1: 07/05/2005 |
|
DS DS/EN 60432- 2 |
Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes |
|
DS DS/EN 60432- 3 |
Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle)-Amendment 1: 07/05/2005 |
|
DS DS/EN 60433 |
Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic Insulators for a.c. systems - Characteristics of insulator units of the long rod type |
|
DS DS/EN 60437 |
Radio interference test on high-voltage insulators |
|
DS DS/EN 60439- 1 |
Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies |
|
DS DS/EN 60439-1 (SIK) |
Low-voltage switchgear and controlgear assemblies - Part 1: Type- tested and partially type-tested assemblies |
|
DS DS/EN 60439- 1/A1 |
Low-voltage switchgear and controlgear assemblies - Part 1: Type- tested and partially type-tested assemblies-(AMENDS DS/EN 60439-1 (Sik)) |
|
DS DS/EN 60439- 2 |
Low voltage switchgear and controlgear assemblies Part 2: Particular requirements for busbar trunking systems (busways)-Amendment 1: 11/16/2005 |
|
DS DS/EN 60439- 4 |
Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS) |
|
DS DS/EN 60439- 5 |
Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies intended to be installed outdoors in public places - Cable distribution cabinets (CDCs) for power distribution in networks |
|
DS DS/EN 60439- 5/A1 |
Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies intended to be installed outdoors in public places - Cable distribution cabinets (CDCs) for power distribution in networks-(AMENDS DS/EN 60439-5) |
|
DS DS/EN 60445 |
Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals and of terminations of certain designated conductors, including general rules for an alphanumeric system |
|
DS DS/EN 60446 |
Basic and safety principles for man-machine interface, marking and identification - Identification of conductors by colours or numerals |
|
DS DS/EN 60450 |
Measurement of the average viscometric degree of polymerisation of new and aged cellulosic electrically insulating materials |
|
DS DS/EN 60454- 2 |
Specification for pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test |
|
DS DS/EN 60454-3- 1 |
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: PVC film tapes with pressure-sensitive adhesive |
|
DS DS/EN 60454-3- 1/A1 |
Pressure-sensitive adhesive tapes for electrical purposes - Part 3-1: Specifications for individual materials - PVC film tapes with pressure-sensitive adhesive- (AMENDS DS/EN 60454-3-1) |
|
DS DS/EN 60454-3- 10 |
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 10: Requirements for cellulose-acetate-butyrate film tapes with rubber thermosetting adhesive |
|
DS DS/EN 60454-3- 11 |
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Combined tapes made of creped cellulosic paper and polyethylene terephthalate film with rubber thermosetting adhesive |
|
DS DS/EN 60454-3- 12 |
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 12: Polyenthylene film tapes with pressure- sensitive adhesive |
|
DS DS/EN 60454-3- 13 |
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 13: Requirements for combined cellulose- viscose woven fabric tapes, one side covered with a thermoplastic material, the other side with rub |
|
DS DS/EN 60454-3- 14 |
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive |
|
DS DS/EN 60454-3- 15 |
Pressure sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 15: Polyester film/polyester non woven combinations with rubber thermosetting adhesive |
|
DS DS/EN 60454-3- 16 |
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 16: Polyester film/glass filament combinations with pressure-sensitive adhesive |
|
DS DS/EN 60454-3- 17 |
Pressure sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 17: Polyester/epoxy combinations with pressure sensitive adhesive |
|
DS DS/EN 60454-3- 18 |
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 18: Polypropylene film tapes with pressure- sensitive adhesive |
|
DS DS/EN 60454-3- 19 |
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides |
|
DS DS/EN 60454-3- 2 |
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Polyester film tapes with rubber thermosetting or acrylic crosslinked adhesives |
|
DS DS/EN 60454-3- 3 |
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Polyester film tapes with rubber thermoplastic adhesive |
|
DS DS/EN 60454-3- 4 |
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulosic paper, creped, with rubber thermosetting adhesive |
|
DS DS/EN 60454-3- 5 |
Pressure sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 5: Cellulosic paper, non-creped, with rubber thermosetting adhesive |
|
DS DS/EN 60454-3- 7 |
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Polyimide film tapes with pressure-sensitive adhesive |
|
DS DS/EN 60454-3- 9 |
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 9: Cellulose acetate woven fabric tapes with rubber thermosetting adhesive |
|
DS DS/EN 60455- 1 |
Resin based reactive compounds used for electrical insulation - Part 1: Definitions and general requirements |
|
DS DS/EN 60455- 2 |
Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
|
DS DS/EN 60455-3- 1 |
Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Unfilled epoxy resinous compounds |
|
DS DS/EN 60455-3- 2 |
Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Quartz filled epoxy resinous compounds |
|
DS DS/EN 60455-3- 3 |
Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 3: Unfilled polyurethane compounds |
|
DS DS/EN 60455-3- 4 |
Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 4: Filled polyurethane compounds |
|
DS DS/EN 60455-3- 5 |
Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 5: Unsaturated polyester based impregnating resins |
|
DS DS/EN 60464- 1 |
Varnishes used for electrical insulation - Part 1: Definitions and general requirements |
|
DS DS/EN 60464- 2 |
Varnishes used for electrical insulation - Part 2: Methods of Test |
|
DS DS/EN 60464-3- 1 |
Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Ambient curing finishing varnishes |
|
DS DS/EN 60464-3- 2 |
Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Hot curing impregnating varnishes |
|
DS DS/EN 60470+CORR. |
High-voltage alternating current contactors and contactor- based motor starters |
|
DS DS/EN 60505 |
Evaluation and qualification of electrical insulation systems |
|
DS DS/EN 60517 |
Gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above |
|
DS DS/EN 60529+A1 |
Degrees of protection provided by enclosures (IP Code) |
|
DS DS/EN 60544- 4 |
Electrical insulating materials - Determination of the effects of ionizing radiation - Part 4: Classification system for service in radiation environments |
|
DS DS/EN 60544- 5 |
Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service |
|
DS DS/EN 60554- 2 |
Cellulosic papers for electrical purposes - Part 2: Methods of test |
|
DS DS/EN 60567 |
Guide for the sampling of gases and of oil from oil-filled electrical equipment and for the analysis of free and dissolved gases |
|
DS DS/EN 60570 |
Electrical supply track systems for luminaires |
|
DS DS/EN 60570 + CORR |
Electrical supply track systems for luminaries |
|
DS DS/EN 60570/A1/CORR. |
Electrical supply track systems for luminaries |
|
DS DS/EN 60570-2- 1 |
Electrical supply track systems for luminaires - Part 2: Mixed suppply systems - Section 1: Classes I and III |
|
DS DS/EN 60570-2- 1/A1 |
Electrical supply track systems for luminaires - Part 2: Mixed supply systems - Section 1: Classes I and III-(AMENDS DS/EN 60570-2-1) |
|
DS DS/EN 60598- 1 |
Luminaires - Part 1: General requirements and tests |
|
DS DS/EN 60598- 1/A11/CORR. |
Luminaires - Part 1: General requirements and tests |
|
DS DS/EN 60598- 1/A12 |
Luminaires - Part 1: General requirements and tests-(AMENDS DS/EN 60598-1) |
|
DS DS/EN 60598- 1/A14 |
Luminaires - Part 1: General requirements and tests-(AMENDS DS/EN 60598-1+Corr.+A1,12,13) |
|
DS DS/EN 60598- 1/A14/CORR. |
Luminaires - Part 1: General requirements and tests |
|
DS DS/EN 60598- 1+A11+CORR. (SIK) |
Luminaires - Part 1: General requirements and tests-; Includes CD ROM ) |
|
DS DS/EN 60598-2-1 TIL 2-4 (SIK) |
Luminaires - Part 2: Particular requirements - Section 1: Fixed general purpose luminaires - Section 2: Recessed luminaires - Section 3: Luminaires for road and street lighting - Section 4: Portable general purpose luminaires |
|
DS DS/EN 60598-2- 17+CORR+A2 |
Luminaires - Part 2: Particular requirements - Section 17: Luminaires for stage lighting, television, film and photographic studios (outdoor and indoor) |
|
DS DS/EN 60598-2- 18 |
Luminaires - Part 2: Particular requirements - Section 18: Luminaires for swimming pools and similar applications |
|
DS DS/EN 60598-2- 18/CORR. |
Luminaires - Part 2: Particular requirements - Section 18: Luminaires for swimming pools and similar applications |
|
DS DS/EN 60598-2- 19 |
Luminaires - Part 2: Particular requirements - Section nineteen: Air- handling luminaires (safety requirements) |
|
DS DS/EN 60598-2- 19/A2 |
Luminaires - Part 2: Particular requirements - Section 19: Air-handling luminaires (safety requirements)-(AMENDS DS/EN 60598-2-19) |
|
DS DS/EN 60598-2-20+2- 22 (SIK) |
Luminaires - Part 2: Particular requirements - Section 20: Lighting chains - Section 22: Luminaires for emergency lighting |
|
DS DS/EN 60598-2- 22/A1 |
Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting-(AMENDS DS/EN 60598-2-20+2-22 (Sik)) |
|
DS DS/EN 60598-2-23 TIL 2-25 (SIK) |
Luminaires - Part 2: Particular requirements - Section 23: Extra low-voltage lighting systems for filament lamps - Section 24: Luminaires with limited surface temperatures - Section 25: Luminaires for use in clinical areas of hospitals and health care bui |
|
DS DS/EN 60598-2- 3 |
Luminaires Part 2-3: Particular requirements Luminaires for road and street lighting |