|
DS DS 106.3 |
Fluid power systems and components - Graphic symbols |
|
DS DS 157 |
Straight gas cocks, 15, 20, 25, 32, 40, 50, 70 and 80 mm |
|
DS DS 158 |
L-shaped gas cocks - 20, 25, 32 and 40 mm |
|
DS DS 2071.0 |
Valves for batteries of gas cylinders - Outlet connections |
|
DS DS 2071.1 |
Valves for batteries of gas cylinders - Outlet connections for ammonia and oxygen |
|
DS DS 2071.2 |
Valves for batteries of gas cylinders - Outlet connection for nitrous oxide |
|
DS DS 2071.3 |
Valves for batteries of gas cylinders - Outlet connection for nitrogen |
|
DS DS 2071.4 |
Valves for batteries of gas cylinders - Outlet connection for acetylene |
|
DS DS 2079.1 |
Fittings for piping - Pipe threaded connections (short) |
|
DS DS 2079.2 |
Fittings for piping - Pipe threaded connections |
|
DS DS 2080 |
Fittings of copper alloys for piping - Pressure and temperature ratings |
|
DS DS 2085 |
Fittings for piping - Wrench grip |
|
DS DS 2087 |
Female ended valves - End-to-end dimensions |
|
DS DS 2125 |
Plastics pipes - Measurement of dimensions - Visual inspection of surfaces |
|
DS DS 2130 |
Plastics pipes - Test A for leakproofness of elastic sealing joint |
|
DS DS 2130.2 |
Plastics pipes - Test B for leakproofness of joints under internal air pressure |
|
DS DS 2130.3 |
Plastics pipes - Test C for leakproofness of joints under external water pressure |
|
DS DS 2130- 4 |
Plastic pipes. Test D for leakproofness of joints under external water pressure. |
|
DS DS 2145 |
PVC-pipes - Testing and determination of the resistance to stress- cracking |
|
DS DS 24 |
Cock for gas hoses for town gas and gas hose connectors for gas cookers |
|
DS DS 2404 |
Dimensioning of the outlet connection/coupling for gas cylinder valves for cylinder pressure < 250 bar - exclusive LPG |
|
DS DS 727.0 |
Valves for steel cylinders for gases - Outlet connections - Survey |
|
DS DS 727.1 |
Valves for steel cylinders for gases - Town gas, ethylchloride, hydrogen, carbon monoxide - Outlet connections |
|
DS DS 727.2 |
Valves for steel cylinders for gases - Ammonia, carbon dioxide and oxygen - Outlet connections |
|
DS DS 727.3 |
Valves for steel cylinders for gases - Nitrogen and inactive gases - Outlet connections |
|
DS DS 727.4 |
Valves for steel cylinders for gases - Sulphur dioxide - Outlet connections |
|
DS DS 727.5 |
Valves for steel cylinders for gases - Dinitrogen oxide - Outlet connections |
|
DS DS 727.6 |
Valves for steel cylinders for gases - Chlorine, hydrogen chloride, phosgene - Outlet connections |
|
DS DS 727.7 |
Valves for steel cylinders for gases - Acetylene - Outlet connections |
|
DS DS 727.8 |
Valves for steel cylinders for gases - Compressed atmospheric air - Outlet connections |
|
DS DS/CEN/CR 13445- 7 |
Unfired pressure vessels - Part 7: Guidance on the use of the conformity procedures |
|
DS DS/CEN/CR 13642 |
Flanges and their joints - Design rules for gasketed circular flange connections - Background information |
|
DS DS/CEN/CR 13930 |
Rotodynamic pumps - Design of pump intakes - Recommendations for installation of pumps |
|
DS DS/CEN/CR 13931 |
Rotodynamic pumps - Forces and moments on flanges centrifugal, mixed flow and axial flow pumps - Horizontal and vertical shafts |
|
DS DS/CEN/CR 13932 |
Rotodynamic pumps - Recommendations for fitting of inlet and outlet on piping |
|
DS DS/CEN/CR 14473 |
Transportable gas cylinders - Porous masses for acetylene cylinders |
|
DS DS/CEN/TR 13480- 7 |
Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures |
|
DS DS/CEN/TS 14825 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Testing and rating of part load conditions |
|
DS DS/CEN/TS 764- 6 |
Pressure equipment - Part 6: Structure and content of operating instructions |
|
DS DS/EN 1012- 1 |
Compressors and vacuum pumps - Safety requirements - Part 1: Compressors |
|
DS DS/EN 1012- 2 |
Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps |
|
DS DS/EN 10216- 1 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
|
DS DS/EN 10216- 1/A1 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties- (AMENDS DS/EN 10216-1) |
|
DS DS/EN 10216- 2 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
|
DS DS/EN 10216- 2/A1 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties-(AMENDS DS/EN 10216-2) |
|
DS DS/EN 10216- 3 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
|
DS DS/EN 10216- 3/A1 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes-(AMENDS DS/EN 10216-3) |
|
DS DS/EN 10216- 4 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
|
DS DS/EN 10216- 4/A1 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties- (AMENDS DS/EN 10216-4) |
|
DS DS/EN 10216- 5 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
|
DS DS/EN 10217- 1 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
|
DS DS/EN 10217- 2 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties-Amendment 1: 02/24/2005 |
|
DS DS/EN 10217- 3 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes-Amendment 1: 02/24/2005 |
|
DS DS/EN 10217- 4 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties- Amendment 1: 02/28/2005 |
|
DS DS/EN 10217- 5 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties-Amendment 1:02/24/2005 |
|
DS DS/EN 10217- 6 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc non-alloy steel tubes with specified low temperature properties- Amendment 1: 02/28/2005 |
|
DS DS/EN 10217- 7 |
Welded steel tubes for pressure purposes Technical delivery conditions Part 7: Stainless steel tubes |
|
DS DS/EN 10220 |
Seamless and welded steel tubes - Dimensions and masses per unit length |
|
DS DS/EN 10240 |
Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants |
|
DS DS/EN 10241 |
Steel threaded pipe fittings |
|
DS DS/EN 10242 |
Threaded pipe fitting in malleable cast iron |
|
DS DS/EN 10242/A1+AC |
Threaded pipe fitting in malleable cast iron-(AMENDS DS/EN 10242) |
|
DS DS/EN 10242/A2 |
Threaded pipe fittings in malleable cast iron-(AMENDS DS/EN 10242) |
|
DS DS/EN 10246- 1 |
Non-destructive testing of steel tubes - Part 1: Automatic eletromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness |
|
DS DS/EN 10246- 10 |
Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections |
|
DS DS/EN 10246- 11 |
Non-destuctive testing of steel tubes - Part 11: Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections |
|
DS DS/EN 10246- 12 |
Non-destructive testing of steel tubes - Part 12: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections |
|
DS DS/EN 10246- 13 |
Non-destructive testing of steel tubes - Part 13: Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes |
|
DS DS/EN 10246- 14 |
Non-destructive testing of steel tubes - Part 14: Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections |
|
DS DS/EN 10246- 15 |
Non-destructive testing of steel tubes - Part 15: Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections |
|
DS DS/EN 10246- 16 |
Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections |
|
DS DS/EN 10246- 17 |
Non-destructive testing of steel tubes - Part 17: Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections |
|
DS DS/EN 10246- 18 |
Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections |
|
DS DS/EN 10246- 2 |
Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic- ferritic steel tubes for verification of hydraulic leak-tightness |
|
DS DS/EN 10246- 3 |
Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
|
DS DS/EN 10246- 4 |
Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections |
|
DS DS/EN 10246- 5 |
Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for the detection of longitudinal imperfections |
|
DS DS/EN 10246- 6 |
Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections |
|
DS DS/EN 10246- 7 |
Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections |
|
DS DS/EN 10246- 8 |
Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections |
|
DS DS/EN 10246- 9 |
Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections |
|
DS DS/EN 10253- 1 |
Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements |
|
DS DS/EN 10255 |
Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions |
|
DS DS/EN 10256 |
Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non- destructive testing personnel |
|
DS DS/EN 10266 |
Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards |
|
DS DS/EN 10275 |
Metallic materials - Tube ring hydraulic pressure test |
|
DS DS/EN 10284 |
Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems |
|
DS DS/EN 10288 |
Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings |
|
DS DS/EN 10289 |
Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings |
|
DS DS/EN 10290 |
Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings |
|
DS DS/EN 10298 |
Steel tubes and fittings for on shore and offshore pipelines Internal lining with cement mortar |
|
DS DS/EN 10300 |
Steel tubes and fittings for onshore and offshore pipelines Bituminous hot applied materials for external coating |
|
DS DS/EN 10305- 1 |
Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes |
|
DS DS/EN 10305- 2 |
Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
|
DS DS/EN 10305- 3 |
Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
|
DS DS/EN 10305- 4 |
Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
|
DS DS/EN 10305- 5 |
Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded and cold sized square and rectangular tubes |
|
DS DS/EN 10305- 6 |
Steel tubes for precision applications Technical delivery conditions Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
|
DS DS/EN 10310 |
Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings |
|
DS DS/EN 10311 |
Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids |
|
DS DS/EN 1074- 1 |
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements |
|
DS DS/EN 1074- 2 |
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves |
|
DS DS/EN 1074- 2/A1 |
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves-(AMENDS DS/EN 1074-2) |
|
DS DS/EN 1074- 3 |
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3: Check valves |
|
DS DS/EN 1074- 5 |
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves |
|
DS DS/EN 1089- 1 |
Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 1: Stampmarking |
|
DS DS/EN 1089- 2 |
Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 2: Precautionary labels |
|
DS DS/EN 1089- 3 |
Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3: Colour coding |
|
DS DS/EN 1092- 1 |
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges |
|
DS DS/EN 1092- 2 |
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges |
|
DS DS/EN 1092- 3 |
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges |
|
DS DS/EN 1092- 3/AC |
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges |
|
DS DS/EN 1092- 4 |
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges |
|
DS DS/EN 1119 |
Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints |
|
DS DS/EN 1120 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a section in a deflected condition |
|
DS DS/EN 1151 |
Pumps. Rotodynamic pumps - Circulation pumps having an electrical effect not exceeding 200 W for heating installations and domestic hot water installations - Requirements, testing, marking |
|
DS DS/EN 1171 |
Industrial valves - Cast iron gate valves |
|
DS DS/EN 12061 |
Plastics piping systems - Thermoplastics fittings - Test method for impact resistance |
|
DS DS/EN 12099 |
Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content |
|
DS DS/EN 12106 |
Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off |
|
DS DS/EN 12107 |
Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components |
|
DS DS/EN 12115 |
Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification |
|
DS DS/EN 12117 |
Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships |
|
DS DS/EN 12118 |
Plastics piping systems - Determination of moisture content in thermoplastics by coulometry |
|
DS DS/EN 12119 |
Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling |
|
DS DS/EN 12157 |
Rotodynamic pumps - Coolant pumps units for machine tools - Nominal flow rate, dimensions |
|
DS DS/EN 12162 |
Liquid pumps - Safety requirements - Procedure for hydrostatic testing |
|
DS DS/EN 12205 |
Transportable gas cylinders - Non refillable metallic gas cylinders |
|
DS DS/EN 12213 |
Cryogenic vessels - Methods for performance evaluation of thermal insulation |
|
DS DS/EN 12245 |
Transportable gas cylinders - Fully wrapped composite cylinders |
|
DS DS/EN 1225 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness |
|
DS DS/EN 12256 |
Plastics piping systems - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings |
|
DS DS/EN 12257 |
Transportable gas cylinders - Seamless, hoop-wrapped composite cylinders |
|
DS DS/EN 1226 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring deflection |
|
DS DS/EN 12262 |
Rotodynamic pumps. Technical documents - Terms, delivery range, layout |
|
DS DS/EN 12266- 1 |
Industrial valves - Testing of valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
|
DS DS/EN 12266- 2 |
Industrial valves - Testing of valves - Part 2: Tests, test procedures and acceptance critera - Supplementary requirements |
|
DS DS/EN 1227 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term ultimate relative ring deflection under wet conditions |
|
DS DS/EN 1228 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness |
|
DS DS/EN 12285- 1 |
Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids |
|
DS DS/EN 12285- 2 |
Workshop fabricated steel tanks Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids |
|
DS DS/EN 12288 |
Industrial valves - Copper alloy gate valves |
|
DS DS/EN 1229 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short- term internal pressure |
|
DS DS/EN 12293 |
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling |
|
DS DS/EN 12294 |
Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum |
|
DS DS/EN 12295 |
Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test method for resistance of joints to pressure cycling |
|
DS DS/EN 12300 |
Cryogenic vessels - Cleanliness for cryogenic service |
|
DS DS/EN 12309- 1 |
Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW - Part 1: Safety |
|
DS DS/EN 12309- 2 |
Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW - Part 2: Rational use of energy |
|
DS DS/EN 12334 |
Industrial valves - Cast iron check valves |
|
DS DS/EN 12334/A1 |
Industrial valves - Cast iron check valves-(AMENDS DS/EN 12334) |
|
DS DS/EN 12334/AC |
Industrial valves - Cast iron check valves |
|
DS DS/EN 12351 |
Industrial valves - Protective caps for valves with flanged connections |
|
DS DS/EN 12434 |
Cryogenic vessels - Cryogenic flexible hoses |
|
DS DS/EN 12434/AC |
Cryogenic vessels - Cryogenic flexible hoses |
|
DS DS/EN 12449 |
Copper and copper alloys - Seamless, round tubes for general purposes |
|
DS DS/EN 12450 |
Copper and copper alloys - Seamless, round copper capillary tubes |
|
DS DS/EN 12483 |
Liquid pumps - Pump units with frequency inverters - Guarantee and compatibility tests |
|
DS DS/EN 1251- 1 |
Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1: Fundamental requirements |
|
DS DS/EN 1251- 2 |
Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing |
|
DS DS/EN 1251- 3 |
Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 3: Operational requirements |
|
DS DS/EN 12516- 2 |
Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells |
|
DS DS/EN 12516- 3 |
Valves - Shell design strength - Part 3: Experimental method |
|
DS DS/EN 1252- 1 |
Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below -80øC |
|
DS DS/EN 1252- 1/AC |
Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below -80øC |
|
DS DS/EN 1252- 2 |
Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80 øC and -20 øC |
|
DS DS/EN 1254- 1 |
Copper and copper alloy - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
|
DS DS/EN 12542 |
Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m3 and for installation above ground Design and manufacture-Amendment 1: 02/04/2005 |
|
DS DS/EN 1254- 2 |
Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes |
|
DS DS/EN 1254- 3 |
Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes |
|
DS DS/EN 1254- 4 |
Copper and copper alloys. Plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends |
|
DS DS/EN 1254- 4/AC |
Copper and copper alloys - Plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends |
|
DS DS/EN 1254- 5 |
Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes |
|
DS DS/EN 12560- 1 |
Flanges and their joints - Gaskets for Class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts |
|
DS DS/EN 12560- 2 |
Flanges and their joints - Gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges |
|
DS DS/EN 12560- 3 |
Flanges and their joints - Gaskets for Class-designated flanges - Part 3: Non-metallic PTFE envelope gaskets |
|
DS DS/EN 12560- 4 |
Flanges and their joints - Gaskets for Class-designated flanges - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges |
|
DS DS/EN 12560- 5 |
Flanges and their joints - Gaskets for Class-designated flanges - Part 5: Metallic ring joint gaskets for use with steel flanges |
|
DS DS/EN 12560- 6 |
Flanges and their joints - Gaskets for class-designated flanges - Part 6: Covered serrated metal gaskets for used with steel flanges |
|
DS DS/EN 12560- 7 |
Flanges and their joints - Gaskets for Class-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges |
|
DS DS/EN 12567 |
Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests |
|
DS DS/EN 12569+AC |
Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests |
|
DS DS/EN 12570 |
Industrial valves - Method for sizing the operating element |
|
DS DS/EN 12573- 1 |
Welded static non-pressurised thermoplastic tanks - Part 1: General principles |
|
DS DS/EN 12573- 2 |
Welded static non-pressurised thermoplastic tanks - Part 2: Calculation of vertical cylindrical tanks |
|
DS DS/EN 12573- 3 |
Welded static non-pressurised thermoplastic tanks - Part 3: Design and calculation for single skin rectangular tanks |
|
DS DS/EN 12573- 4 |
Welded static non-pressurised thermoplastic tanks - Part 4: Design and calculation of flanged joints |
|
DS DS/EN 12585 |
Glass plant, pipeline and fittings - Pipeline and fittings DN 15 to 1 000 - Compatibility and interchangeability |
|
DS DS/EN 126 |
Multifunctional controls for gas burning appliances |
|
DS DS/EN 12627 |
Industrial valves - Butt welding ends for steel valves |
|
DS DS/EN 12639 |
Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy |
|
DS DS/EN 12639/AC |
Liquid pumps and pump units - Noise test code - Grade 2 and Grade 3 of accuracy |
|
DS DS/EN 12639/AC |
Liquid pumps and pump units - Noise test code - Grade 2 and Grade 3 of accuracy |
|
DS DS/EN 1267 |
Valves - Test of flow resistance using water as test fluid |
|
DS DS/EN 12723 |
Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units |
|
DS DS/EN 12754 |
Transportable gas cylinders - Cylinders for dissolved acetylene - Inspection at time of filling |
|
DS DS/EN 12755 |
Transportable gas cylinders - Filling conditions for acetylene bundles |
|
DS DS/EN 12756 |
Mechanical seals - Principal dimensions, designation and material codes |
|
DS DS/EN 12760 |
Valves - Socket welding ends for steel valves |
|
DS DS/EN 1277 |
Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints |
|
DS DS/EN 12807 |
Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) - Design and construction |
|
DS DS/EN 12816 |
Transportable refillable steel and aluminium LPG cylinders - Disposal |
|
DS DS/EN 12817 |
Inspection and requalification of LPG tanks up to and including 13 m3 overground |
|
DS DS/EN 12818 |
Inspection and requalification of LPG tanks up to and including 13 m3 underground |
|
DS DS/EN 12819 |
Inspection and requalification of LPG tanks greater than 13 m3 overground |
|
DS DS/EN 12820 |
Inspection and requalification of LPG tanks greater then 13 m3 underground |
|
DS DS/EN 12862 |
Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders |
|
DS DS/EN 12863 |
Transportable gas cylinders - Periodic inspection and maintenance of dissolved acetylene cylinders |
|
DS DS/EN 12864 |
Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures |
|
DS DS/EN 12864/A1 |
Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures-(AMENDS DS/EN 12864) |
|
DS DS/EN 12982 |
Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves |
|
DS DS/EN 13053 |
Ventilation for buildings - Air handling units - Ratings and performance for units, components and sections |
|
DS DS/EN 13053/AC |
Ventilation for buildings - Air handling units - Ratings and performance for units, components and sections |
|
DS DS/EN 13094 |
Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction |
|
DS DS/EN 13096 |
Transportable gas cylinders - Conditions for filling gases into receptacles - Single component gases |
|
DS DS/EN 13099 |
Transportable gas cylinders - Conditions for filling gas mixtures into receptacles |
|
DS DS/EN 13109 |
LPG tanks - Disposal |
|
DS DS/EN 13110 |
Transportable refillable welded aluminium cylinders for liquefied petroleum gas - Design and construction |
|
DS DS/EN 13121- 1 |
GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance conditions |
|
DS DS/EN 13121- 2 |
GRP tanks and vessels for use above ground - Part 2: Composite materials - Chemical resistance |
|
DS DS/EN 13152 |
Specification and testing of LPG cylinder valves - Self closing |
|
DS DS/EN 13152/A1 |
Specification and testing of LPG cylinder valves - Self closing- (AMENDS DS/EN 13152) |
|
DS DS/EN 13153 |
Specification and testing of LPG cylinder valves - Manually operated |
|
DS DS/EN 13153/A1 |
Specification and testing of LPG cylinder valves - Manually operated-(AMENDS DS/EN 13153) |
|
DS DS/EN 13175 |
Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings-Amendment 1: 5/23/2005 |
|
DS DS/EN 13181 |
Ventilation for buildings - Terminals - Performance testing of louvres subject to simulated sand |
|
DS DS/EN 13275 |
Cryogenic vessels - Pumps for cryogenic service |
|
DS DS/EN 13293 |
Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 li |
|
DS DS/EN 13322- 1 |
Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 1: Carbon steel |
|
DS DS/EN 13322- 2 |
Transportable gas cylinders - Refillable welded stainless steel gas cylinders - Design and construction - Part 2: Stainless steel |
|
DS DS/EN 1333 |
Pipework components - Definition and selection of PN |
|
DS DS/EN 13365 |
Transportable gas cylinders - Cylinder bundles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling-Amendment 1: 09/16/2005 |
|
DS DS/EN 13371 |
Cryogenic vessels - Couplings for cryogenic service |
|
DS DS/EN 13385 |
Transportable gas cylinders - Battery vehicles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling |
|
DS DS/EN 13397 |
Industrial valves - Diaphragm valves made of metallic materials |
|
DS DS/EN 13445- 1+ISSUE 7 |
Unfired pressure vessels - Part 1: General |
|
DS DS/EN 13445- 2 |
Unfired pressure vessels - Part 2: Materials |
|
DS DS/EN 13445- 2/ISSUE 11 |
Unfired pressure vessels - Part 2: Materials |
|
DS DS/EN 13445- 3 |
Unfired pressure vessels - Part 3: Design-Amendment 4: 08/22/2005 |
|
DS DS/EN 13445-3/ISSUE 15 |
Unfired pressure vessels - Part 3: Design |
|
DS DS/EN 13445- 4 |
Unfired pressure vessels - Part 4: Fabrication |
|
DS DS/EN 13445-4/ISSUE 12 |
Unfired pressure vessels - Part 4: Fabrication |
|
DS DS/EN 13445- 5 |
Unfired pressure vessels - Part 5: Inspection and testing-Amendment 2:7/2/2005 |
|
DS DS/EN 13445-5/ISSUE 14 |
Unfired pressure vessels - Part 5: Inspection and testing |
|
DS DS/EN 13445- 6 |
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron |
|
DS DS/EN 13445- 6/A1 |
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron-(AMENDS DS/EN 13445-6) |
|
DS DS/EN 13445-6/ISSUE 11 |
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron |
|
DS DS/EN 13458- 1 |
Cryogenic vessels - Static vacuum insulated vessels - Part 1: Fundamental requirements |
|
DS DS/EN 13458- 2 |
Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing |
|
DS DS/EN 13458- 3 |
Cryogenic vessels - Static vacuum insulated vessels - Part 3: Operational requirements-Amendment 1: 7/21/2005 |
|
DS DS/EN 13480- 1 |
Metallic industrial piping - Part 1: General |
|
DS DS/EN 13480- 2 |
Metallic industrial piping - Part 2: Materials |
|
DS DS/EN 13480- 3 |
Metallic industrial piping - Part 3: Design and calculation-Amendment 1:8/31/2005 |
|
DS DS/EN 13480- 4 |
Metallic industrial piping - Part 4: Fabrication and installation |
|
DS DS/EN 13480- 5 |
Metallic industrial piping - Part 5: Inspection and testing |
|
DS DS/EN 13480- 6 |
Metallic industrial piping - Part 6: Additional requirements for buried piping |
|
DS DS/EN 1349 |
Industrial process control valves |
|
DS DS/EN 1349/AC |
Industrial process control valves |
|
DS DS/EN 13530- 1 |
Cryogenic vessels - Large transportable vacuum insulated vessels - Part 1: Fundamental requirements |
|
DS DS/EN 13530- 2 |
Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing |
|
DS DS/EN 13530- 2/A1 |
Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing-(AMENDS DS/EN 13530-2) |
|
DS DS/EN 13530- 3 |
Cryogenic vessels - Large transportable vacuum insulated vessels - Part 3: Operational requirements-DS/EN 13530-3/A1: 07/14/2005 |
|
DS DS/EN 13575 |
Thermoplastic tanks made from blow or rotational moulded polyethylene - Tanks for the above ground storage of chemicals - Requirements and test methods |
|
DS DS/EN 13611 |
Safety and control devices for gas burners and gas-burning appliances - General requirements |
|
DS DS/EN 13636 |
Cathodic protection of buried metallic tanks and related piping |
|
DS DS/EN 13648- 1 |
Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service |
|
DS DS/EN 13648- 2 |
Cryogenic vessels - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices for cryogenic service |
|
DS DS/EN 13648- 3 |
Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge - Capacity and sizing |
|
DS DS/EN 13709 |
Industrial valves - Steel globe and globe stop and check valves |
|
DS DS/EN 13720 |
Transportable gas cylinders - Filling conditions for acetylene battery vehicles |
|
DS DS/EN 13765 |
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification |
|
DS DS/EN 13769 |
Transportable gas cylinders - Cylinder bundles - Design, manufacture, identification and testing-Amendment 1: 07/12/2005 |
|
DS DS/EN 13774 |
Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements |
|
DS DS/EN 13785 |
Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures |
|
DS DS/EN 13789 |
Industrial valves - Cast iron globe valves |
|
DS DS/EN 13799 |
Contents gauges for LPG tanks |
|
DS DS/EN 13807 |
Transportable gas cylinders - Battery vehicles - Design, manufacture, identification and testing-DS/EN 13807/AC: 07/21/2005 |
|
DS DS/EN 13923 |
Filament-wound FRP pressure vessels Materials, design, manufacturing and testing |
|
DS DS/EN 1393 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial longitudinal tensile properties |
|
DS DS/EN 1393/AC |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial longitudinal tensile properties |
|
DS DS/EN 1394 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength |
|
DS DS/EN 1394/AC |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength |
|
DS DS/EN 13951 |
Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to ensure hygiene in use |
|
DS DS/EN 13952 |
LGP cylinders - Filling procedures |
|
DS DS/EN 13953 |
Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) |
|
DS DS/EN 14015 |
Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
|
DS DS/EN 14071 |
Pressure relief valves for LPG tanks Ancillary equipment |
|
DS DS/EN 14075 |
Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 mü and for installation underground - Design and manufacture-Amendment 1: 2005 |
|
DS DS/EN 1411 |
Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method |
|
DS DS/EN 14129 |
Pressure relief valves for LPG tanks |
|
DS DS/EN 14140 |
Transportable refillable welded steel cylinders for Liquefied Petroleum Gas (LPG) - Alternative design and construction |
|
DS DS/EN 14189 |
Transportable gas cylinders - Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders |
|
DS DS/EN 14197- 1 |
Cryogenic vessels - Static non-vacuum insulated vessels - Part 1: Fundamental requirements |
|
DS DS/EN 14197- 2 |
Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing |
|
DS DS/EN 14197- 3 |
Cryogenic vessels - Static non-vacuum insulated vessels - Part 3: Operational requirements-Corrigendum:10/12/2004; Addenda 1:7/21/2005 |
|
DS DS/EN 14208 |
Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction |
|
DS DS/EN 1439 |
LPG equipment and accessories Transportable refillable welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders Procedure for checking before, during and after filling |
|
DS DS/EN 14398- 1 |
Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 1: Fundamental requirements |
|
DS DS/EN 14398- 2 |
Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing |
|
DS DS/EN 1440 |
Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Periodic requalification |
|
DS DS/EN 1440/AC |
Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Periodic requalification |