|
DS DS/EN 1442 |
Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) Design and construction-Corrigendum AC:5/28/2001; Amendment 1: 07/01/2002; Amendment 2: 04/13/2005 |
|
DS DS/EN 14420- 1 |
Hose fittings with clamp units - Part 1: Requirements, survey, designation and testing |
|
DS DS/EN 14420- 2 |
Hose fittings with clamp units - Part 2: Hose side parts of hose tail |
|
DS DS/EN 14420- 3 |
Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
|
DS DS/EN 14420- 4 |
Hose fittings with clamp units - Part 4: Flange connections |
|
DS DS/EN 14420- 5 |
Hose fittings with clamp units - Part 5: Threaded connections |
|
DS DS/EN 14420- 6 |
Hose fittings with clamp units - Part 6: TW tank truck couplings |
|
DS DS/EN 14420- 7 |
Hose fittings with clamp units - Part 7: Cam locking couplings |
|
DS DS/EN 14420- 8 |
Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) |
|
DS DS/EN 14422 |
Clamp type coupling assemblies for LPG transfer hoses |
|
DS DS/EN 14423 |
Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
|
DS DS/EN 14424 |
Hose fittings with screwed ferrules |
|
DS DS/EN 14427 |
Transportable refillable fully wrapped composite cylinders for Liquefied Petroleum Gases (LPG) - Design and construction |
|
DS DS/EN 1446 |
Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility |
|
DS DS/EN 1447 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure |
|
DS DS/EN 1448 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of rigid locked socket-and-spigot joints with elastomeric seals |
|
DS DS/EN 1450 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of bolted flange joints |
|
DS DS/EN 1450/A1 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of bolted flange joints-(AMENDS DS/EN 1450) |
|
DS DS/EN 14511- 1 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 1: Terms and definitions |
|
DS DS/EN 14511- 2 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 2: Test conditions |
|
DS DS/EN 14511- 3 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 3: Test methods |
|
DS DS/EN 14511- 4 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 4: Requirements |
|
DS DS/EN 14513 |
Transportable gas cylinders Bursting disc pressure relief devices (excluding acetylene gas cylinders) |
|
DS DS/EN 14525 |
Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U, PE, Fibre- cement |
|
DS DS/EN 14570 |
Equipping of LPG tanks, overground and underground |
|
DS DS/EN 14763 |
LPG equipment and accessories Transportable refillable composite cylinders for Liquefied Petroleum Gas (LPG) Procedure for checking before, during and after filling |
|
DS DS/EN 14772 |
Flanges and their joints Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 |
|
DS DS/EN 14794 |
LPG equipment and accessories Transportable refillable aluminium cylinders for Liquefied Petroleum Gas (LPG) Procedure for checking before, during and after filling |
|
DS DS/EN 1503- 1 |
Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards |
|
DS DS/EN 1503- 2 |
Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified in European Standards |
|
DS DS/EN 1503- 3 |
Valves - Materials for bodies, bonnets and covers - Part 3: Cast irons specified in European Standards |
|
DS DS/EN 1503- 3/AC |
Valves - Materials for bodies, bonnets and covers - Part 3: Cast irons specified in European Standards |
|
DS DS/EN 1503- 4 |
Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards |
|
DS DS/EN 1514- 1 |
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts |
|
DS DS/EN 1514- 2 |
Flanges and their joints Dimensions of PN-designated flanges Part 2: Spiral wound gaskets for use with steel flanges |
|
DS DS/EN 1514- 3 |
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 3: Non-metallic PTFE envelope gaskets |
|
DS DS/EN 1514- 4 |
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges |
|
DS DS/EN 1514- 6 |
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges |
|
DS DS/EN 1514- 7 |
Flanges and their joints - Gaskets for PN-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges |
|
DS DS/EN 1514- 8 |
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 8: Polymeric O-Ring gaskets for grooved flanges |
|
DS DS/EN 1515- 1 |
Flanges and their joints - Bolting - Part 1: Selection of bolting |
|
DS DS/EN 1515- 2 |
Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated |
|
DS DS/EN 1515- 3 |
Flanges and their joints Bolting Part 3: Classification of bolt materials for steel flanges, class designated |
|
DS DS/EN 1591- 1 |
Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method |
|
DS DS/EN 161 |
Automatic shut-off valves for gas burners and gas appliances |
|
DS DS/EN 1626 |
Cryogenic vessels - Valves for cryogenic service |
|
DS DS/EN 1638 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method for the effects of cyclic internal pressure |
|
DS DS/EN 1704 |
Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending-(AMENDS DS/ETS 300197) |
|
DS DS/EN 1705 |
Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow |
|
DS DS/EN 1716 |
Plastics piping systems - Polyethylene (PE) tapping tees - Test method for impact resistance of an assembled tapping tee |
|
DS DS/EN 1759- 1 |
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS to 24 |
|
DS DS/EN 1759- 3 |
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 3: Copper alloy flanges |
|
DS DS/EN 1759- 3/AC |
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges |
|
DS DS/EN 1759- 4 |
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges |
|
DS DS/EN 1795 |
Transportable gas cylinders (excluding LPG) - Procedures for change of gas service |
|
DS DS/EN 1797 |
Cryogenic vessels - Gas/material compatibility |
|
DS DS/EN 1800 |
Transportable gas cylinders - Acetylene cylinders - Basic requirements and definitions |
|
DS DS/EN 1800/AC |
Transportable gas cylinders - Acetylene cylinders - Basic requirements and definitions |
|
DS DS/EN 1801 |
Transportable gas cylinders - Filling conditions for single acetylene cylinders |
|
DS DS/EN 1801/AC |
Transportable gas cylinders - Filling conditions for single acetylene cylinders |
|
DS DS/EN 1802 |
Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders |
|
DS DS/EN 1803 |
Transportable gas cylinders - Periodic inspection and testing of welded carbon steel gas cylinders |
|
DS DS/EN 1822- 1 |
High efficiency air filters (HEPA and ULPA) - Part 1: Classification, performance testing, marking |
|
DS DS/EN 1822- 2 |
High efficiency air filters (HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics |
|
DS DS/EN 1822- 3 |
High efficiency air filters (HEPA and ULPA) - Part 3: Testing flat sheet filter media |
|
DS DS/EN 1822- 4 |
High efficiency particulate air filters (HEPA and ULPA) - Part 4: Determining leakage of filter element (Scan method) |
|
DS DS/EN 1822- 5 |
High efficiency particulate air filters (HEPA and ULPA) - Part 5: Determining the efficiency of filter element |
|
DS DS/EN 1854 |
Pressure sensing devices for gas burners and gas burning appliances |
|
DS DS/EN 1854/A1 |
Pressure sensing devices for gas burners and gas burning appliances-(AMENDS DS/EN 1854) |
|
DS DS/EN 1862 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the relative flexural creep factor following exposure to a chemical environment |
|
DS DS/EN 19 |
Industrial valves - Marking of metallic valves |
|
DS DS/EN 1905 |
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on the total chlorine content |
|
DS DS/EN 1919 |
Transportable gas cylinders - Cylinders for liquefied gases (excluding acetylene and LPG) - Inspection at time of filling |
|
DS DS/EN 1920 |
Transportable gas cylinders - Cylinders for compressed gases (excluding acetylene) - Inspection at time of filling |
|
DS DS/EN 1964- 1 |
Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 1: Cylinders made of seamless steel with an Rm va |
|
DS DS/EN 1964- 2 |
Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 2: Cylinders made of seamless steel with an Rm va |
|
DS DS/EN 1964- 3 |
Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 3: Cylinders made of seamless stainless steel wit |
|
DS DS/EN 1968 |
Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders-Amendment A1: 10/17/2005 |
|
DS DS/EN 1971 |
Copper and copper alloys - Eddy current test for tubes |
|
DS DS/EN 1975/A1 |
Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0,5 litre up to 150 litre-(AMENDS DS/EN 1975+AC) |
|
DS DS/EN 1975+AC |
Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0,5 litre up to 150 litre |
|
DS DS/EN 1979 |
Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determinaton of the tensile strength of a seam |
|
DS DS/EN 1984 |
Industrial valves - Steel gate valves |
|
DS DS/EN 22858 |
End-suction centrifugal pumps (rating 16 bar) - Designation, nominal duty point and dimensions |
|
DS DS/EN 23661 |
End-suction centrifugal pumps - Baseplate and installation dimensions |
|
DS DS/EN 24641 |
Rubber products - Textile-reinforced hoses for water suction |
|
DS DS/EN 24641/AC |
Rubber hoses for water suction and discharge - Specification |
|
DS DS/EN 26553 |
Automatic steam traps - Marking |
|
DS DS/EN 26554 |
Flanged automatic steam traps - Face-to-face dimensions |
|
DS DS/EN 26704 |
Automatic steam traps - Classification |
|
DS DS/EN 26801 |
Rubber or plastics hoses - Determination of volumetric expansion |
|
DS DS/EN 26802 |
Rubber and plastics hose and hose assemblies - Wire reinforced - Hydraulic impulse test with flexing |
|
DS DS/EN 26948 |
Automatic steam traps - Production and performance characteristic tests |
|
DS DS/EN 27326 |
Rubber and plastics hoses - Assessment of ozone resistance under static conditions |
|
DS DS/EN 27841 |
Automatic steam traps - Determination of steam loss - Test methods |
|
DS DS/EN 27842 |
Automatic steam traps - Determination of discharge capacity - Test methods |
|
DS DS/EN 28029 |
Plastics hose - General purpose collapsible water hose, textile reinforced - Specification |
|
DS DS/EN 28033 |
Rubber and plastic hoses - Determination of adhesion between components |
|
DS DS/EN 28233 |
Thermoplastics valves - Torque - Test method |
|
DS DS/EN 286- 1 |
Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes-Corrigendum AC: 11/7/2002; Amendment 1: 01/23/2003; Amendment 2: 11/03/2005 |
|
DS DS/EN 286- 2+AC |
Simple unfired pressure vessels designed to contain air or nitrogen - Part 2: Pressure vessels for air braking and auxiliary systems for motor vehicles and their trailers |
|
DS DS/EN 328 |
Heat exchangers - Test procedures for establishing the performance of forced convection unit air coolers for refrigeration |
|
DS DS/EN 328/A1 |
Heat exchangers - Test procedure for establishing the performance of forced convection unit air coolers for refrigeration-(AMENDS DS/EN 328) |
|
DS DS/EN 331 |
Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
|
DS DS/EN 334 |
Gas pressure regulators for inlet pressures up to 100 bar |
|
DS DS/EN 417 |
Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking |
|
DS DS/EN 558- 1 |
Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 1: PN-designated valves |
|
DS DS/EN 558- 2 |
Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 2: Class-designated valves |
|
DS DS/EN 578 |
Plastics piping systems - Plastics pipes and fittings - Determination of the opacity |
|
DS DS/EN 579 |
Plastics piping systems - Crosslinked polyethylene (PE-X) pipes - Determination of degree of crosslinking by solvent extraction |
|
DS DS/EN 580 |
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT) |
|
DS DS/EN 593 |
Industrial valves - Metallic butterfly valves |
|
DS DS/EN 60335-2- 34/A11 |
Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors-Amendment 11: 3/26/2004; Amendment 1: 5/24/2005 |
|
DS DS/EN 60335-2- 40 |
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers- Amendment 11: 09/02/2004; Amendment 12: 4/19/2005 |
|
DS DS/EN 60335-2- 65 |
Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances |
|
DS DS/EN 60335-2- 65/CORR.1 |
Household and similar electrical appliances - Safety - Part 2- 65: Particular requirements for air-cleaning appliances |
|
DS DS/EN 60335-2- 80 |
Safety of household and similar electrical appliances - Part 2: Particular requirements for fans |
|
DS DS/EN 60335-2- 80 |
Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans |
|
DS DS/EN 60335-2- 80/A1 |
Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans-(AMENDS DS/EN 60335-2-80) |
|
DS DS/EN 60335-2- 88 |
Household and similar electrical appliances - Safety - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation or air- conditioning systems |
|
DS DS/EN 60335-2- 88 |
Safety of household and similar electrical appliances - Part 2: Particular requirements for humidifiers intended for use with heating, ventilation or air conditioning systems |
|
DS DS/EN 60335-2- 98 |
Household and similar electrical appliances Safety Part 2-98: Particular requirements for humidifiers-Amendment 1: 04/18/2005 |
|
DS DS/EN 60534- 1 |
Industrial-process control valves Part 1: Control valve terminology and general considerations |
|
DS DS/EN 60534-2- 1 |
Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions |
|
DS DS/EN 60534-2- 1/CORR. |
Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions |
|
DS DS/EN 60534-2- 3 |
Industrial-process control valves - Part 2-3: Flow capacity - Test procedures |
|
DS DS/EN 60534-2- 5 |
Industrial-process control valves - Part 2-5: Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery |
|
DS DS/EN 60534-3- 1 |
Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves |
|
DS DS/EN 60534-3- 2 |
Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves |
|
DS DS/EN 60534-3- 3 |
Industrial-process control valves - Part 3: Dimensions - Section 3: End-to- end dimensions for buttweld, two-way, globe-type, straight pattern control valves |
|
DS DS/EN 60534- 5 |
Industrial-process control valves - Part 5: Marking |
|
DS DS/EN 60534-6- 1 |
Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators |
|
DS DS/EN 60534-6- 2 |
Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators |
|
DS DS/EN 60534-8- 1 |
Industrial-process control valves - Part 8: Noise considerations - Section 1: Laboratory measurement of noise generated by aerodynamic flow through control valves |
|
DS DS/EN 60534-8- 3 |
Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method |
|
DS DS/EN 60704-2- 7 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2: Particular requirements for fans |
|
DS DS/EN 629- 1 |
Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders - Part 1: Specification |
|
DS DS/EN 629- 2 |
Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders - Part 2: Gauge inspection |
|
DS DS/EN 637 |
Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method |
|
DS DS/EN 681- 1 |
Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber-Amendment 1: 10/05/1998; Amendment 2: 3/24/2003; Amendment 3: 9/09/2005 |
|
DS DS/EN 705 |
Plastics piping systems - Glass reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analyses and their use |
|
DS DS/EN 712 |
Termoplastics piping systems - End-load bearing mechanical joints between pressure pipes and fittings - Test method for resistance to pull-out under constant longitudinal force |
|
DS DS/EN 713 |
Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending |
|
DS DS/EN 714 |
Thermoplastics piping systems - Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings - Test method for leaktightness under internal hydrostatic pressure without end thrust |
|
DS DS/EN 715 |
Thermoplastics piping systems - End-load bearing joints between small diameter pressure pipes and fittings - Test method for leaktightness under internal water pressure, including end thrust |
|
DS DS/EN 720- 1 |
Transportable gas cylinders - Gases and gas mixtures - Part 1: Properties of pure gases |
|
DS DS/EN 727 |
Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST) temperature |
|
DS DS/EN 733 |
End-suction centrifugal pumps, rating with 10 bar with bearing bracket - Nominal duty point, main dimensions, designation system |
|
DS DS/EN 734 |
Side channel pumps PN 40 - Nominal duty point, main dimensions, designation system |
|
DS DS/EN 735 |
Overall dimensions of rotodynamic pumps - Tolerances |
|
DS DS/EN 736- 1 |
Valves - Terminology - Part 1: Definition of types of valves |
|
DS DS/EN 736- 2 |
Valves - Terminology - Part 2: Definition of components of valves |
|
DS DS/EN 736- 3 |
Valves - Terminology - Part 3: Definition of terms |
|
DS DS/EN 736- 3/A1 |
Valves - Terminology - Part 3: Definition of terms-(AMENDS DS/EN 736-3) |
|
DS DS/EN 743 |
Plastics piping and ducting systems - Thermoplastics pipes - Determination of the longitudinal reversion |
|
DS DS/EN 744 |
Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method |
|
DS DS/EN 751- 1 |
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds |
|
DS DS/EN 751- 2 |
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds |
|
DS DS/EN 751- 3+AC |
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes |
|
DS DS/EN 761 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions |
|
DS DS/EN 763 |
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Test method for visually assessing effects of heating |
|
DS DS/EN 764- 1 |
Pressure equipment - Terminology - Part 1: Pressure, temperature, volume, nominal size |
|
DS DS/EN 764- 2 |
Pressure equipment - Part 2: Quantities, symbols and units |
|
DS DS/EN 764- 3 |
Pressure equipment - Part 3: Definition of parties involved |
|
DS DS/EN 764- 4 |
Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
|
DS DS/EN 764- 5 |
Pressure Equipment - Part 5: Compliance and Inspection Documentation of Materials |
|
DS DS/EN 764- 7 |
Pressure equipment - Part 7: Safety systems for unfired pressure equipment |
|
DS DS/EN 764- 7/AC |
Pressure equipment - Part 7: Safety systems for unfired pressure equipment |
|
DS DS/EN 802 |
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing |
|
DS DS/EN 803 |
Plastics piping systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end thrust |
|
DS DS/EN 804 |
Plastics piping systems - Injection-moulded socket fittings for solvent- cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure |
|
DS DS/EN 809 |
Pumps and pump units for liquids - Common safety requirements |
|
DS DS/EN 809/AC |
Pumps and pump units for liquids - Common safety requirements |
|
DS DS/EN 810 |
Dehumidifiers with electrically driven compressors - Rating tests, marking, operational requirements and technical data sheet |
|
DS DS/EN 849 |
Transportable gas cylinders - Cylinder valves - Specification and type testing |
|
DS DS/EN 849/A1 |
Transportable gas cylinders - Cylinder valves - Specification and type testing-(AMENDS DS/EN 849) |
|
DS DS/EN 849/A2 |
Transportable gas cylinders - Cylinder valves - Specification and type testing-(AMENDS DS/EN 849) |
|
DS DS/EN 853 |
Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
|
DS DS/EN 854 |
Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
|
DS DS/EN 855 |
Plastics hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification |
|
DS DS/EN 856 |
Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification |
|
DS DS/EN 857 |
Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification |
|
DS DS/EN 88 |
Pressure governors for gas appliances for inlet pressures up to 200 mbar |
|
DS DS/EN 88/A1 |
Pressure governors for gas appliances for inlet pressures up to 200 mbar-(AMENDS DS/EN 88) |
|
DS DS/EN 911 |
Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure |
|
DS DS/EN 917 |
Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness |
|
DS DS/EN 921/RET.1 |
Plastics piping systems - Thermoplastic pipes - Determination of resistance to internal pressure at constant temperature |
|
DS DS/EN 921+AC |
Plastics piping systems - Thermoplastics pipes - Determination of resistance to internal pressure at constant temperature |
|
DS DS/EN 922 |
Plastics piping and ducting systems - Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) - Specimen preparation for determination of the viscosity number and calculation of the K-value |
|
DS DS/EN 962 |
Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests |
|
DS DS/EN 962/A1 |
Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests-(AMENDS DS/EN 962) |
|
DS DS/EN 962/A2 |
Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests-(AMENDS DS/EN 962) |
|
DS DS/EN 978 |
Underground tanks of glass-reinforced plastics (GRP) - Determination of factor alpha and factor beta |
|
DS DS/EN 982 |
Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
|
DS DS/EN 983 |
Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
|
DS DS/EN ISO 10156- 2 |
Gas cylinders Gases and gas mixtures Part 2: Determination of oxidizing ability of toxic and corrosive gases and gas mixtures-:1997 |
|
DS DS/EN ISO 10380 |
Pipework - Corrugated metallic hoses and hose assemblies |
|
DS DS/EN ISO 10497 |
Testing of valves - Fire type-testing requirements |
|
DS DS/EN ISO 10692- 1 |
Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Part 1: Outlet connections |
|
DS DS/EN ISO 10692- 2 |
Gas cylinders - Gas cylinder valve connections for use in microelectronic industry - Part 2: Specification and type testing for valve to cylinder connections |
|
DS DS/EN ISO 10806 |
Pipework - Fittings for corrugated metal hoses |
|
DS DS/EN ISO 10960 |
Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions |
|
DS DS/EN ISO 11114- 1 |
Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials |
|
DS DS/EN ISO 11114- 1/AC |
Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials |
|
DS DS/EN ISO 11114- 2 |
Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials |
|
DS DS/EN ISO 11114- 3 |
Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test in oxygen atmosphere |
|
DS DS/EN ISO 11114- 3/AC |
Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test in oxygen atmosphere |
|
DS DS/EN ISO 11114- 4 |
Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement |
|
DS DS/EN ISO 11116- 1 |
Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Part 1: Specifications |
|
DS DS/EN ISO 11116- 2 |
Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Part 2: Inspection gauges |
|
DS DS/EN ISO 11120 |
Gas cylinders - Refillable seamless steel tubes for compressed gas transport of water capacity between 150 l and 3000 l - Design, construction and testing |
|
DS DS/EN ISO 1127 |
Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length |
|
DS DS/EN ISO 11621 |
Gas cylinders Procedures for change of gas service |
|
DS DS/EN ISO 11623 |
Transportable gas cylinders - Periodic inspection and testing of composite gas cylinders |
|
DS DS/EN ISO 11758 |
Rubber and plastics hoses - Exposure to a xenon arc lamp - Determination of changes in colour and appearance |
|
DS DS/EN ISO 11758/AC |
Rubber and plastics hoses - Exposure to a xenon arc lamp - Determination of changes in colour and appearance |
|
DS DS/EN ISO 12162 |
Thermoplastics materials for pipes and fittings for pressure applications - Classification and designation - Overall service (design) coefficient |
|
DS DS/EN ISO 12209- 1 |
Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 1: Yoke type connections |
|
DS DS/EN ISO 12209- 2 |
Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 2: Threaded connections |
|
DS DS/EN ISO 12209- 3 |
Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 3: Adaptor for 230 bar valves |
|
DS DS/EN ISO 1307 |
Rubber and plastic hoses for general-purpose industrial applications - Bore diameters and tolerances, and tolerances on length |
|
DS DS/EN ISO 13340 |
Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing |
|
DS DS/EN ISO 13341 |
Transportable gas cylinders - Fitting of valves to gas cylinders |
|
DS DS/EN ISO 13341/AC |
Transportable gas cylinders - Fitting of valves to gas cylinders |
|
DS DS/EN ISO 13478 |
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST) |
|
DS DS/EN ISO 13479 |
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (notch test) |
|
DS DS/EN ISO 13760 |
Plastics pipes for the conveyance of fluids under pressure - Miner´s rule - Calculation method for cumulative damage |
|
DS DS/EN ISO 13783 |
Plastics piping systems - Unplasticized poly(vinyl chlorid) (PVC-U) end-load-bearing double socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure |
|
DS DS/EN ISO 13846 |
Plastics piping systems - End-load-bearing and non-end-load- bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure |
|
DS DS/EN ISO 1402 |
Rubber and plastics hoses and hose assemblies - Hydrostatic testing |
|
DS DS/EN ISO 1403 |
Rubber hoses, textile-reinforced, for general-purpose water applications - Specification |
|
DS DS/EN ISO 14246 |
Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections |
|
DS DS/EN ISO 14847 |
Rotary positive displacement pumps - Technical requirements |
|
DS DS/EN ISO 15245- 1 |
Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification |
|
DS DS/EN ISO 15245- 2 |
Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection |
|
DS DS/EN ISO 15465 |
Pipework - Stripwound metal hoses and hose assemblies |
|
DS DS/EN ISO 15493 |
Plastics piping systems for industrial applications - Acrylonitrile- butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - specifications for components and the system - Metric series |
|
DS DS/EN ISO 15494 |
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE) and polypropylene (PP) - Specifications for components and the system - Metric series |
|
DS DS/EN ISO 15783 |
Seal-less rotodynamic pumps - Class II - Specification |
|
DS DS/EN ISO 16330 |
Reciprocating positive displacement pumps and pump units - Technical requirements |
|
DS DS/EN ISO 16871 |
Plastics piping and ducting systems - Plastic pipes and fittings - Method for exposure to direct (natural) weathering |
|
DS DS/EN ISO 17292 |
Metal ball valves for petroleum, petrochemical and allied industries |
|
DS DS/EN ISO 1746 |
Rubber or plastics hoses and tubing - Bending tests |
|
DS DS/EN ISO 19879 |
Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections |
|
DS DS/EN ISO 21007- 1 |
Gas cylinders Identification and marking using radio frequency identification technology Part 1: Reference architecture and terminology (ISO 21007- 1:2005) |
|
DS DS/EN ISO 21007- 2 |
Gas cylinders Identification and marking using radio frequency identification technology Part 2: Numbering schemes for radio frequency identification |
|
DS DS/EN ISO 2151 |
Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) |
|
DS DS/EN ISO 2398 |
Rubber hose, textile-reinforced, for compressed air - Specification |
|
DS DS/EN ISO 3126 |
Plastics piping systems Plastics components Determination of dimensions |
|
DS DS/EN ISO 3994 |
Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification |
|
DS DS/EN ISO 4023 |
Rubber hoses for steam - Test methods |
|
DS DS/EN ISO 4080 |
Rubber and plastics hoses and hose assemblies - Determination of permeability to gas |
|
DS DS/EN ISO 4080/AC |
Rubber and plastics hoses and hose assemblies - Determination of permeability to gas |
|
DS DS/EN ISO 4671 |
Rubber and plastics hose and hose assemblies - Methods of measurement of dimensions |
|
DS DS/EN ISO 4672 |
Rubber and plastics hoses - Sub-ambient temperature flexibility tests |
|
DS DS/EN ISO 5135 |
Acoustics - Determination of sound power levels of noise from air- terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room |
|
DS DS/EN ISO 5136 |
Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method |
|
DS DS/EN ISO 5198 |
Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class |
|
DS DS/EN ISO 5199 |
Technical specifications for centrifugal pumps - Class II |
|
DS DS/EN ISO 5210 |
Industrial valves - Multi-turn valve actuator attachments |
|
DS DS/EN ISO 5211 |
Industrial valves - Part-turn actuator attachments |
|
DS DS/EN ISO 5774 |
Plastics hoses, textile-reinforced, for compressed air - Specification |
|
DS DS/EN ISO 580 |
Plastics piping and ducting systems Injectionmoulded thermoplastics fittings Methods for visually assessing the effects of heating |
|
DS DS/EN ISO 6134 |
Rubber hoses and hose assemblies for saturated steam Specification |
|
DS DS/EN ISO 6224 |
Plastics hoses, textile-reinforced, for general-purpose water applications - Specification |
|
DS DS/EN ISO 6259- 1 |
Thermoplastics pipes - Determination of tensile properties - Part 1: General test method |
|
DS DS/EN ISO 6412- 1 |
Technical drawings - Simplified representation of pipelines - Part 1: General rules and orthogonal representation |
|
DS DS/EN ISO 6412- 2 |
Technical drawings - Simplified representation of pipelines - Part 2: Isometric projection |
|
DS DS/EN ISO 6412- 3 |
Technical drawings - Simplified representation of pipelines - Part 3: Terminal features of ventilation and drainage systems |
|
DS DS/EN ISO 6708 |
Pipework components - Definition and selection of DN (nominal size) |
|
DS DS/EN ISO 6803 |
Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing |
|
DS DS/EN ISO 6945 |
Rubber hoses - Determination of abrasion resistance of the outer cover |
|
DS DS/EN ISO 6945/A1 |
Rubber hoses - Determination of abrasion resistance of the outer cover-(AMENDS DS/EN ISO 6945) |
|
DS DS/EN ISO 7233 |
Rubber and plastics hoses and hose assemblies - Determination of suction resistance |
|
DS DS/EN ISO 7369 |
Pipework - Metal hoses and hose assemblies - Vocabulary |
|
DS DS/EN ISO 7662 |
Rubber and plastics hoses - Determination of abrasion of lining |
|
DS DS/EN ISO 7686 |
Plastics pipes and fittings Determination of opacity |
|
DS DS/EN ISO 7751 |
Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure |
|
DS DS/EN ISO 8030 |
Rubber and plastics hoses - Method of test for flammability |
|
DS DS/EN ISO 8031 |
Rubber and plastics hoses and hose assemblies - Determination of electrical resistance |
|
DS DS/EN ISO 8032 |
Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) |
|
DS DS/EN ISO 8308 |
Rubber and plastics hoses and tubing - Determination and transmission of liquids through hose and tubing walls |
|
DS DS/EN ISO 8330 |
Rubber and plastics hoses and hose assemblies - Vocabulary |
|
DS DS/EN ISO 8434- 1 |
Metallic tube connections for fluid power and general use - Part 1: 24ø compression fittings |
|
DS DS/EN ISO 8434- 4 |
Metallic tube connections for fluid power and general use - Part 4: 24ø cone connectors with O-ring weld-on nipples |
|
DS DS/EN ISO 8580 |
Rubber and plastics hoses - Determination of ultra-violet resistance under static conditions |
|
DS DS/EN ISO 9080 |
Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation |
|
DS DS/EN ISO 9097 |
Small craft - Electric fans |
|
DS DS/EN ISO 9097/A1 |
Small craft - Electric fans-(AMENDS DS/EN ISO 9097) |
|
DS DS/EN ISO 9905 |
Technical specifications for centrifugal pumps - Class I |
|
DS DS/EN ISO 9906 |
Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2 |
|
DS DS/EN ISO 9908 |
Technical specifications for centrifugal pump - Class III |
|
DS DS/EN ISO 9967 |
Thermoplastics pipes - Determination of creep ratio |
|
DS DS/EN ISO 9969 |
Thermoplastics pipes - Determination of ring stiffness |
|
DS DS/EN ISO 9974- 1 |
Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1:Treaded ports |
|
DS DS/EN ISO 9974- 2 |
Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) |
|
DS DS/EN ISO 9974- 3 |
Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to- metal sealing (type B) |
|
DS DS/ENV 12102 |
Air conditioners, heat pumps and dehumidifiers with electrically driven compressors - Measurement of airborne noise - Determination of the sound power level |
|
DS DS/ENV 1591- 2 |
Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters |
|
DS DS/ENV 1993-4- 2 |
Eurocode 3: Design of steel structures - Part 4-2: Silos, tanks and pipelines - Tanks |
|
DS DS/INF 111 |
Distribution plant of industrial gases at user´s works |
|
DS DS/INF 140 |
Guide for EN 13445 |
|
DS DS/INF 70- 1 |
Plastic pipes - Butt fusion of polyolefine pipe systems - Information, scope and definitions |
|
DS DS/INF 70- 2 |
Plastics pipes - Butt fusion of polyolefine pipe systems - Fusion methodology |
|
DS DS/INF 70- 3 |
Plastics pipes - Butt fusion of polyolefine pipe systems - Visual inspection |
|
DS DS/INF 70- 4 |
Plastics pipes - Butt fusion of polyolefine pipe systems - Marking and documentation |
|
DS DS/INF 70- 5 |
Plastics pipes - Butt fusion of polyolefine pipe systems - Strength of weldings - Test methods |
|
DS DS/INF 70- 6 |
Plastics pipes - Butt fusion of polyolefine pipe systems - Inspection of fusion equipment |
|
DS DS/INF 70- 7 |
Plastics pipes - Butt fusion of polyolefine pipe systems - Testing of procedure |
|
DS DS/INSTA 210 |
Plastic pipes - Testing - Ring stiffness - Relaxation method |
|
DS DS/INSTA 211 |
Plastic pipes - Determination of ring stiffness - Creep method |
|
DS DS/INSTA 213 |
Plastic pipes and fittings - Temperature cycling test |
|
DS DS/INSTA 214 |
Plastics pipes - Methylenchloride testing of PVC-pipes |
|
DS DS/INSTA 216 |
Plastics pipes - Thermoanalytic test methods for the determination on oxidation stability |
|
DS DS/INSTA 218 |
Plastics pipes - Determination of the impact strength - B50- method |
|
DS DS/ISO 10302 |
Acoustics - Method for the measurement of airborne noise emitted by small air-moving devices |
|
DS DS/ISO 1167 |
Plastics pipes for the transport of fluids - Determination of the resistance to internal pressure |
|
DS DS/ISO 11922- 1 |
Thermoplastics pipes for the conveyance of fluids - Dimensions and tolerances - Part 1: Metric series |
|
DS DS/ISO 12176- 1 |
Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1: Butt fusion |
|
DS DS/ISO 13261- 1 |
Sound power rating of air-conditioning and air-source heat pump equipment - Part 1: Non-ducted outdoor equipment |
|
DS DS/ISO 13261- 2 |
Sound power rating of air-conditioning and air-source heat pump equipment - Part 2: Non-ducted indoor equipment |
|
DS DS/ISO 13347- 1 |
Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 1: General overview |
|
DS DS/ISO 13347- 2 |
Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 2: Reverberant room method |
|
DS DS/ISO 13347- 3 |
Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 3: Enveloping surface methods |
|
DS DS/ISO 13347- 4 |
Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 4: Sound intensity method |
|
DS DS/ISO 13761 |
Plastics pipes and fittings - Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20øC |
|
DS DS/ISO 13953 |
Polyethylene (PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces from a butt-fused joint |
|
DS DS/ISO 13954 |
Plastics pipes and fittings - Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm |
|
DS DS/ISO 13955 |
Plastics pipes and fittings - Crushing decohesion test for polyethylene (PE) electrofusion assemblies |
|
DS DS/ISO 13957 |
Plastics pipes and fittings - Polyethylene (PE) tapping tees - Test method for impact resistance |
|
DS DS/ISO 13967 |
Thermoplastics fittings - Determination of ring stiffness |
|
DS DS/ISO 15853 |
Thermoplastics materials - Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding |
|
DS DS/ISO 161- 1 |
Thermoplastics pipes for the transport of fluids - Nominal outside diameters and nominal pressures - Part 1: Metric series |
|
DS DS/ISO 2507 |
Unplasticized polyvinyl chloride (PVC) pipes and fittings - Vicat softening temperature - Test method and specification |
|
DS DS/ISO 2604/5 |
Steel products for pressure purposes - Quality requirements - Part 5: Longitudinally welded austenitic stainless steel tubes |
|
DS DS/ISO 2604/6 |
Steel products for pressure purposes - Quality requirements - Part 6: Submerged arc longitudinally or spirally welded steel tubes |
|
DS DS/ISO 3304 |
Plane end seamless precision steel tubes - Technical conditions for delivery |
|
DS DS/ISO 3305 |
Plane end welded precision steel tubes - Technical conditions for delivery |
|
DS DS/ISO 3320 |
Fluid power systems and components - Cylinder bores and piston rod diameters - Metric series |
|
DS DS/ISO 3322 |
Fluid power systems and components - Cylinders - Nominal pressures |
|
DS DS/ISO 3601- 1 |
Fluid systems - Sealing devices - O-rings - Part 1: Inside diameters, cross-sections, tolerances and size identification code |
|
DS DS/ISO 3601- 3 |
Fluid systems - Sealing devices - O-rings - Part 3: Quality acceptance criteria |
|
DS DS/ISO 3938 |
Hydraulic fluid power - Contamination analysis - Method for reporting analysis data |
|
DS DS/ISO 3939 |
Fluid power systems and components - Multiple lip packing sets - Methods for measuring stack heights |
|
DS DS/ISO 4391 |
Hydraulic fluid power - Pumps, motors and integral transmissions - Parameter definitions and letter symbols |
|
DS DS/ISO 4393 |
Fluid power systems and components - Cylinders - Basic series of piston strokes |
|
DS DS/ISO 4394- 1 |
Fluid power systems and components - Cylinder barrels - Part 1: Requirements for steel tubes with specially finished bores |
|
DS DS/ISO 4395 |
Fluid power systems and components - Cylinders - Piston rod thread dimensions and types |
|
DS DS/ISO 4409 |
Hydraulic fluid power - Positive displacement pumps, motors and integral transmissions - Determination of steady-state performance |
|
DS DS/ISO 4411 |
Hydraulic fluid power - Valves - Determination of pressure differential/flow characteristics |
|
DS DS/ISO 4434 |
Unplasticized polyvinyl chloride (PVC) adaptor fittings for pipes under pressure - Laying length and size of threads - Metric series |
|
DS DS/ISO 4440- 1 |
Thermoplastics pipes and fittings - Determination of melt mass-flow rate - Part 1: Test method |
|
DS DS/ISO 4440- 2 |
Thermoplastics pipes and fittings - Determination of melt mass-flow rate - Part 2: Test conditions |
|
DS DS/ISO 5597 |
Hydraulic fluid power - Cylinders - Housings for piston and rod seals in reciprocating applications - Dimensions and tolerances |
|
DS DS/ISO 5598 |
Fluid power systems and components - Vocabulary |
|
DS DS/ISO 5784- 1 |
Fluid power systems and components - Fluid logic circuits - Part 1: Symbols for binary logic and related functions |
|
DS DS/ISO 6022 |
Hydraulic fluid power - Single rod cylinders - Mounting dimensions - 250 bar (25 000 kPa) series |
|
DS DS/ISO 6072 |
Hydraulic fluid power - Compatibility between elastomeric materials and fluids |
|
DS DS/ISO 6099 |
Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types |
|
DS DS/ISO 6150 |
Pneumatic fluid power - Cylindrical quick-action couplings for maximum working pressures of 10 bar, 16 bar and 25 bar (1 MPA, 1,6 MPa and 2,5 MPa) - Plug connecting dimensions, specifications, application guidelines and testing |
|
DS DS/ISO 6194/1 |
Rotary shaft lip type seals - Part 1: Nominal dimensions and tolerances |
|
DS DS/ISO 6194- 3 |
Rotary shaft lip type seals - Part 3: Storage, handling and installation |
|
DS DS/ISO 6195 |
Fluid power systems and components - Cylinders - Housing for rod wiper rings in reciprocating applications - Dimensions and tolerances |
|
DS DS/ISO 6259- 2 |
Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI) |
|
DS DS/ISO 6259- 3 |
Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes |
|
DS DS/ISO 6403 |
Hydraulic fluid power - Valves controlling flow and pressure - Test methods |
|
DS DS/ISO 6432 |
Pneumatic fluid power - Single rod cylinders - 10 bar (1 000 kPa) series - Bores from 8 to 25 mm - Mounting dimensions |
|
DS DS/ISO 6537 |
Fluid power systems - Cylinder barrels - Requirements for non-ferrous metallic tubes |
|
DS DS/ISO 6547 |
Hydraulic fluid power - Cylinders - Piston seal housings incorporating bearing rings - Dimensions and tolerances |
|
DS DS/ISO 6552 |
Automatic steamtraps - Definitions of technical terms |
|
DS DS/ISO 6605 |
Hydraulic fluid power - Hose assemblies - Method of test |
|
DS DS/ISO 6802 |
Rubber and plastics hose and hose assemblies - Wire reinforced - Hydraulic impulse test with flexing |
|
DS DS/ISO 6964 |
Polyolefin pipes and fittings - Determination of carbon black content by calcination and pyrolysis - Test method and basic specification |
|
DS DS/ISO 7180 |
Pneumatic fluid power - Cylinders - Bore and port thread sizes |
|
DS DS/ISO 7241/1 |
Hydraulic fluid power - Quick-action couplings - Part 1: Dimensions and requirements |
|
DS DS/ISO 7425- 1 |
Hydraulic fluid power - Housings for elastomer-energized plastic-faced seals - Dimensions and tolerances - Part 1: Piston seal housings |
|
DS DS/ISO 7744 |
Hydraulic fluid power - Filters - Statement of requirements |
|
DS DS/ISO 7842 |
Automatic steam traps - Determination of discharge capacity - Test methods |
|
DS DS/ISO 8136 |
Hydraulic fluid power - Single rod cylinders, 160 bar (16 MPa) medium series - Port dimensions |
|
DS DS/ISO 8137 |
Hydraulic fluid power - Single rod cylinders, 250 bar (25 MPa) series - Port dimensions |
|
DS DS/ISO 8426 |
Hydraulic fluid power - Positive displacement pumps and motors - Determination of derived capacity |
|
DS DS/ISO 9854- 1 |
Thermoplastics pipes for the transport of fluids - Determination of pendulum impact strength by the Charpy method - Part 1: General test method |
|
DS DS/ISO 9854- 2 |
Thermoplastics pipes for the transport of fluids - Determination of pendulum impact strength by the Charphy method - Part 2: Test conditions for pipes of various materials |
|
DS DS/ISO/TR 10358 |
Plastics pipes and fittings - Combined chemical-resistance classification table |