|
DS DS 1 |
Metric linear basic sizes for engineering |
|
DS DS 15 |
Radii and chamfers |
|
DS DS 2011 |
Micrometers - External micrometers of standard design - Terms and definitions, requirements, testing |
|
DS DS 2012 |
Measuring equipment - Vernier callipers - Requirements, testing |
|
DS DS 2188 |
Acoustics - Vocabulary |
|
DS DS 2191.0 |
Measurement of noise from woodworking machines - Part 0: Guidelines |
|
DS DS 2191.1 |
Measurement of noise from woodworking machines - Part 1: Determination of sound pressure level at the operator´s and other specified positions around the machine |
|
DS DS 2191.2 |
Measurement of noise from woodworking machines - Part 2: Operating conditions for single blade circular saw benches |
|
DS DS 2191.3 |
Measurement of noise from woodworking machines - Part 3: Operating conditions for planing machines |
|
DS DS 2191.4 |
Measurement of noise from woodworking machines - Part 4: Operating conditions for thickness planing machines |
|
DS DS 2191.5 |
Measurement of noise from woodworking machines - Part 5: Operating conditions for single spindle moulding machines |
|
DS DS 2191.6 |
Measurement of noise from woodworking machines - Part 6: Operating conditions for double-end profiling machines |
|
DS DS 2191.7 |
Measurement of noise from woodworking machines - Part 7: Operating conditions for edge banding machines |
|
DS DS 2191.8 |
Measurement of noise from woodworking machines - Part 8: Operating conditions for double-end sizing and edge banding machines |
|
DS DS 2191.9 |
Measurement of noise from woodworking machines - Part 9: Operating conditions for two-side and multi-side planing and moulding machines |
|
DS DS 2344 |
International vocabulary of basic and general terms in metrology |
|
DS DS 2351 |
Micrometer - Internal micrometer, terms and definitions, technical requirements, testing |
|
DS DS 2352 |
Dial gauges - Terms and definitions, technical requirements, testing |
|
DS DS 2353 |
Dial indicator for linear measurement with mechanical indication - Terms and definitions, technical requirements |
|
DS DS 2354 |
Micrometers - Micrometer caliper heads, depth micrometer - Terms, definitions and technical testing |
|
DS DS 2355 |
Micrometers - Special design micrometer - Calipers for external measurement - Characteristics, requirements, testing |
|
DS DS 2356 |
Dial test indicator (lever type) - Terms, definitions, technical requirements |
|
DS DS 2357- 1 |
Graphical symbols for dimensional metrology |
|
DS DS 2358 |
Surface plates - Granite surface plates - Requirements - Testing |
|
DS DS 2359 |
Surface plates - Cast iron surface plates - Requirements - Testing |
|
DS DS 2360 |
Steel squares 90 |
|
DS DS 2361 |
Measuring equipment. Knife edge straight edges. Sizes. Requirements, testing |
|
DS DS 2362- 1 |
Measuring equipment - Inclination measuring instruments - Part 1: Inclination measuring instruments (levels) - Definitions, requirements, testing |
|
DS DS 2362- 2 |
Measuring equipment - Inclination measuring instruments - Part 2: Spirit level vials - Dimensions, requirements |
|
DS DS 2362- 3 |
Measuring equipment - Inclination measuring instruments - Part 3: Electronic inclination measuring elements. Dimensions, requirements |
|
DS DS 2363 |
Measuring equipment. Sine bars. Requirements, testing, marking |
|
DS DS 2364 |
Measuring equipment. Requirements for inspection equipment in dimensional metrology. Auxilliary equipment |
|
DS DS 2366 |
Measuring equipment. Cylindrical measuring pins. Requirements, testing, marking |
|
DS DS 2367 |
Measuring equipment. Measuring prisms (V-blocks). Design. Requirements, testing, marking |
|
DS DS 2368 |
Measuring equipment - Steel straight edges - Dimensions - Requirements and testing |
|
DS DS 2369 |
Measuring equipment - Feeler gauges |
|
DS DS 2370- 1 |
Measuring equipment - Limit gauges - Part 1: Limit gauges and reference gauges for plain parts - Manufacturing tolerances and allowed deviations |
|
DS DS 2370- 2 |
Measuring equipment - Limit gauges - Part 2: Gap gauges and reference gauges for ISO-tolerances for 1-500 mm nominal size. Manufacturing tolerances and allowed deviations |
|
DS DS 2370- 3 |
Measuring equipment - Limit gauges - Part 3: Plug gauges and spherical plug gauges for ISO-tolerances for 1-500 mm nominal size - Manufacturing tolerances and allowed deviations |
|
DS DS 735 |
Colours for identification purposes |
|
DS DS 815 |
Selection of tolerance zones for general purposes |
|
DS DS/CEN/CR 13582 |
Heat meter installation - Some guidelines for selecting, installation and operation of heat meters |
|
DS DS/CEN/CR ISO 14638 |
Geometrical product specifications (GPS) - Masterplan |
|
DS DS/CEN/CR ISO 14638 TIL.1 |
Geometrical product specifications (GPS) - Masterplan - Addendum 1-(AMENDS DS/CEN/CR ISO 14638) |
|
DS DS/CEN/TS 1793- 4 |
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction |
|
DS DS/CEN/TS 1793- 5 |
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection and airborne sound insulation |
|
DS DS/EN 12053 |
Safety of Industrial trucks - Test methods for measuring noise emissions |
|
DS DS/EN 12053/AC |
Safety of Industrial trucks - Test methods for measuring noise emissions |
|
DS DS/EN 12096 |
Mechanical vibration - Declaration and verification of vibration emission values |
|
DS DS/EN 12198- 2 |
Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure |
|
DS DS/EN 12261 |
Gas meters - Turbine gas meters |
|
DS DS/EN 12261/AC |
Gas meters - Turbine gas meters |
|
DS DS/EN 12545 |
Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements |
|
DS DS/EN 12549 |
Acoustics - Noise test code for fastener driving tools - Engineering method |
|
DS DS/EN 12639 |
Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy |
|
DS DS/EN 12639/AC |
Liquid pumps and pump units - Noise test code - Grade 2 and Grade 3 of accuracy |
|
DS DS/EN 12639/AC |
Liquid pumps and pump units - Noise test code - Grade 2 and Grade 3 of accuracy |
|
DS DS/EN 12645 |
Pressure gauges - Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles - Metrology, requirements and testing |
|
DS DS/EN 1265 |
Noise test codes for foundry machines and equipment |
|
DS DS/EN 12736 |
Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level |
|
DS DS/EN 12830 |
Temperature recorders for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Tests, performance, suitability |
|
DS DS/EN 1299 |
Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation |
|
DS DS/EN 13023 |
Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy categories 2 and 3 |
|
DS DS/EN 13032- 1 |
Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 1: Measurement and file format-AC: 03/18/2005 |
|
DS DS/EN 13032- 2 |
Light and lighting Measurement and presentation of photometric data of lamps and luminaires Part 2: Presentation of data for indoor and outdoor work places |
|
DS DS/EN 13190 |
Dial thermometers |
|
DS DS/EN 13485 |
Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Tests, performance, suitability |
|
DS DS/EN 13486 |
Temperature recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-forzen/quick-frosen food and ice cream - Periodic verification |
|
DS DS/EN 13487 |
Heat exchangers - Forced convection air cooled refrigerant condensers and dry coolers - Sound measurement |
|
DS DS/EN 1370 |
Founding - Surface roughness inspection by visual tactile comparators |
|
DS DS/EN 14255- 1 |
Measurement and assessment of personal exposures to incoherent optical radiation Part 1: Ultraviolet radiation emitted by artificial sources in the workplace |
|
DS DS/EN 1434- 1 |
Heat meters - Part 1: General requirements |
|
DS DS/EN 1434- 1/A1 |
Heat meters - Part 1: General requirements-(AMENDS DS/EN 1434- 1) |
|
DS DS/EN 1434- 2 |
Heat meters - Part 2: Constructional requirements |
|
DS DS/EN 1434- 2/A1 |
Heat meters - Part 2: Constructional requirements-(AMENDS DS/EN 1434-2) |
|
DS DS/EN 1434- 3 |
Heat meters - Part 3: Data exchange and interfaces |
|
DS DS/EN 1434- 4 |
Heat meters - Part 4: Pattern approval tests |
|
DS DS/EN 1434- 4/A1 |
Heat meters - Part 4: Pattern approval tests-(AMENDS DS/EN 1434- 4) |
|
DS DS/EN 1434- 5 |
Heat meters - Part 5: Initial verification tests |
|
DS DS/EN 1434- 5/A1 |
Heat meters - Part 5: Initial verification tests-(AMENDS DS/EN 1434- 5) |
|
DS DS/EN 1434- 6 |
Heat meters - Part 6: Installation, commissioning, operational monitoring and maintenance |
|
DS DS/EN 1434- 6/A1 |
Heat meters - Part 6: Installation, commissioning, operational monitoring and maintenance-(AMENDS DS/EN 1434-6) |
|
DS DS/EN 14366 |
Laboratory measurement of noise from waste water installations |
|
DS DS/EN 14462 |
Surface treatment equipment Noise test code for surface treatment equipment including its ancillary handling equipment Accuracy grades 2 and 3 |
|
DS DS/EN 1547 |
Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment |
|
DS DS/EN 1793- 1 |
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption |
|
DS DS/EN 1793- 2 |
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation |
|
DS DS/EN 1793- 3 |
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 3: Normalized traffic noise spectrum |
|
DS DS/EN 20286- 1 |
ISO system of limits and fits - Part 1: Bases of tolerances, deviations and fits |
|
DS DS/EN 20286- 2 |
ISO system of limits and fits - Part 2: Tables of standard tolerance grades and limit deviation for holes and shafts |
|
DS DS/EN 21683 |
Acoustics - Preferred reference quantities for acoustic levels |
|
DS DS/EN 22768- 1 |
General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications |
|
DS DS/EN 22768- 2 |
General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications |
|
DS DS/EN 24006 |
Measurement of fluid flow in closed conduits - Vocabulary and symbols |
|
DS DS/EN 24185 |
Measurement of liquid flow in closed conduits - Weighing method |
|
DS DS/EN 257 |
Mechanical thermostats for gas-burning appliances |
|
DS DS/EN 257/A1 |
Mechanical thermostats for gas-burning appliances-(AMENDS DS/EN 257) |
|
DS DS/EN 27574- 1 |
Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 1: General considerations and definitions |
|
DS DS/EN 27574- 2 |
Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 2: Methods for stated values for individual machines |
|
DS DS/EN 27574- 3 |
Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 3: Simple (transition) method for stated values for batches of machines |
|
DS DS/EN 27574- 4 |
Acoustics - Statistical methods for determinig and verifying stated noise emission values of machinery and equipment - Part 4: Methods for stated values for batches of machines |
|
DS DS/EN 29053 |
Acoustics - Materials for acoustical applications - Determination of airflow resistance |
|
DS DS/EN 29104 |
Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids |
|
DS DS/EN 29295 |
Acoustics - Measurement of high-frequency noise emitted by computer and business equipment |
|
DS DS/EN 45501+AC |
Metrological aspects of non-automatic weighing instruments |
|
DS DS/EN 472 |
Pressure gauges - Vocabulary |
|
DS DS/EN 50147- 1 |
Anechoic chambers - Part 1: Shield attenuation measurement |
|
DS DS/EN 50147- 2 |
Anechoic chambers - Part 2: Alternative test site suitability with respect to site attenuation |
|
DS DS/EN 50212 |
Connectors for thermoelectric sensors |
|
DS DS/EN 50249 |
Electromagnetic locators for buried pipes and cables - Performance and safety |
|
DS DS/EN 50366 |
Household and similar electrical appliances - Electromagnetic fields - Methods for evaluation and measurement |
|
DS DS/EN 548.3 S1 |
Instrument transformers - Part 3: Combined transformers |
|
DS DS/EN 562 |
Gas welding equipment - Pressure gauges used in welding, cutting and allied processes |
|
DS DS/EN 60034- 9 |
Rotating electrical machines Part 9: Noise limits |
|
DS DS/EN 60044- 1 |
Instrument transformers - Part 1: Current transformers |
|
DS DS/EN 60044- 1/A1 |
Instrument transformers - Part 1: Current transformers-(AMENDS DS/EN 60044-1) |
|
DS DS/EN 60044- 1/A2 |
Instrument transformers - Part 1: Current transformers-(AMENDS DS/EN 60044-1) |
|
DS DS/EN 60044- 2 |
Instrument transformers - Part 2: Inductive voltage transformers |
|
DS DS/EN 60044- 2/A1 |
Instrument transformers - Part 2: Inductive voltage transformers- (AMENDS DS/EN 60044-2) |
|
DS DS/EN 60044- 2/A2 |
Instrument transformers - Part 2: Inductive voltage transformers- (AMENDS DS/EN 60044-2) |
|
DS DS/EN 60044- 3 |
Instrument transformers - Part 3: Combined transformers |
|
DS DS/EN 60044- 5 |
Instrument transformers - Part 5: Capacitor voltage transformers |
|
DS DS/EN 60044- 6 |
Instrument transformers - Part 6: Requirements for protective current transformers for transient performance |
|
DS DS/EN 60044- 7 |
Instrument transformers - Part 7: Electronic voltage transformers |
|
DS DS/EN 60044- 8 |
Instrument transformers - Part 8: Electronic current transformers |
|
DS DS/EN 60051- 1 |
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts |
|
DS DS/EN 60118- 0+A1 |
Hearing aids - Part 0: Measurement of electroacoustical characteristics-Incorporates Amendment 1 |
|
DS DS/EN 60118- 1 |
Hearing aids - Part 1: Hearing aids with induction pick-up coil input |
|
DS DS/EN 60118- 1/A1 |
Hearing aids - Part 1: Hearing aids with induction pick-up coil input- (AMENDS DS/EN 60118-1) |
|
DS DS/EN 60118- 12 |
Hearing aids - Part 12: Dimensions of electrical connector systems |
|
DS DS/EN 60118- 14 |
Hearing aids - Part 14: Specification of a digital interface |
|
DS DS/EN 60118- 2 |
Hearing aids - Part 2: Hearing aids with automatic gain control circuits |
|
DS DS/EN 60118- 2/A2 |
Hearing aids - Part 2: Hearing aids with automatic gain control circuits- (AMENDS DS/EN 60118-2) |
|
DS DS/EN 60118- 4+A1 |
Hearing aids - Part 4: Magnetic field strength in audio-frequency induction loops for hearing aid purposes |
|
DS DS/EN 60118- 6 |
Hearing aids - Part 6: Characteristics of electrical input circuits for hearing aids |
|
DS DS/EN 60318- 1 |
Electroacoustics - Simulators of human head and ear - Part 1: Ear simulator for the calibration of supra-aural earphones |
|
DS DS/EN 60318- 2 |
Electroacoustics - Simulators of human head and ear - Part 2: An interim acoustic coupler for the calibration of audiometric earphones in the extended high-frequency range |
|
DS DS/EN 60318- 3 |
Electroacoustics - Simulators of human head and ear - Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry |
|
DS DS/EN 60359 |
Electrical and electronic measurement equipment - Expression of performance |
|
DS DS/EN 60477+A1 |
Laboratory d.c. resistors |
|
DS DS/EN 60534-8- 1 |
Industrial-process control valves - Part 8: Noise considerations - Section 1: Laboratory measurement of noise generated by aerodynamic flow through control valves |
|
DS DS/EN 60534-8- 3 |
Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method |
|
DS DS/EN 60584- 1 |
Thermocouples - Part 1: Reference tables |
|
DS DS/EN 60617- 8 |
Graphical symbols for diagrams - Part 8: Measuring instruments, lamps and signalling devices |
|
DS DS/EN 60645- 2 |
Audiometers - Part 2: Equipment for speech audiometry |
|
DS DS/EN 60645- 5 |
Electroacoustics Audiometric equipment Part 5: Instruments for the measurement of aural acoustic impedance/admittance |
|
DS DS/EN 60687+CORR. |
Alternating current static watt-hour meters for active energy (classes 0,2 S and 0,5 S) |
|
DS DS/EN 60688/A2 |
Electrical measuring transducers for converting a.c. electrical quantities to analogue or digital signals-(AMENDS DS/EN 60688+A1) |
|
DS DS/EN 60688+A1 |
Electrical measuring transducers for converting a.c. electrical quantities to analogue or digital signals |
|
DS DS/EN 60704- 1 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 1: General requirements |
|
DS DS/EN 60704-2- 1 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1: Particular requirements for vacuum cleaners |
|
DS DS/EN 60704-2- 11 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-11: Particular requirements for electrically operated food preparation appliances |
|
DS DS/EN 60704-2- 13 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-13: Particular requirements for range hoods |
|
DS DS/EN 60704-2- 3 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-3: Particular requirements for dishwashers |
|
DS DS/EN 60704-2- 4 |
Household and similar electrical appliances -Test code for the determination of airborne acoustical noise - Part 2-4: Particular requirements for washing machines and spin extractors |
|
DS DS/EN 60704-2- 6 |
Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - Part 2: Particular requirements for tumble- dryers |
|
DS DS/EN 60704-2- 6 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-6: Particular requirements for tumble dryers |
|
DS DS/EN 60704-2- 7 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2: Particular requirements for fans |
|
DS DS/EN 60704-2- 8 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2: Particular requirements for electric shavers |
|
DS DS/EN 60704-2- 9 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-9: Particular requirements for electric hair care appliances |
|
DS DS/EN 60704- 3 |
Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - Part 3: Procedure for determining and verifying declared noise emission values |
|
DS DS/EN 60751+A2 |
Industrial platinum resistance thermometer sensors |
|
DS DS/EN 60761- 1 |
Equipment for continuous monitoring radioactivity in gaseous effluents Part 1: General requirements |
|
DS DS/EN 60761- 2 |
Equipment for continuous monitoring radioactivity in gaseous effluents Part 2: Specific requirements for aerosols monitors including transuranic aerosols |
|
DS DS/EN 60761- 3 |
Equipment for continuous monitoring radioactivity in gasous effluents Part 3: Specific requirements for radioactive noble gas monitors |
|
DS DS/EN 60761- 4 |
Equipment for continuous monitoring radioactivity in gaseous effluents Part 4: Specific requirements for iodine monitors |
|
DS DS/EN 60761- 5 |
Equipment for continuous monitoring radioactivity in gaseous effluents Part 5: Specific requirements for tritium monitors |
|
DS DS/EN 60804 |
Integrating-averaging sound level meters |
|
DS DS/EN 60865- 1 |
Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods |
|
DS DS/EN 60909- 0 |
Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents |
|
DS DS/EN 60909- 3 |
Short-circuit currents in three-phase a.c. systems - Part 3: Currents during two separate simultaneous line-to-earth short circuits and partial short-circuit currents flowing through earth |
|
DS DS/EN 60942 |
Electroacoustics - Sound calibrators |
|
DS DS/EN 60990 |
Methods of measurement of touch current and protective conductor current |
|
DS DS/EN 60994 |
Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines) |
|
DS DS/EN 61012 |
Filters for the measurement of audible sound in the presence of ultrasound |
|
DS DS/EN 61037/A2 |
Electricity metering - Tariff and load control - Particular requirements for electronic ripple control receivers-(AMENDS DS/EN 61037) |
|
DS DS/EN 61037/CORR. |
Electronic ripple control receivers for tariff and load control |
|
DS DS/EN 61043 |
Electroacoustics - Instruments for the measurement of sound intensity - Measurement with pairs of pressure sensing microphones |
|
DS DS/EN 61063 |
Acoustics Measurement of airborne noise emitted by steam turbines and driven machinery |
|
DS DS/EN 61094- 1 |
Measurement microphones - Part 1: Specifications for laboratory standard microphones |
|
DS DS/EN 61094- 2 |
Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique |
|
DS DS/EN 61094- 3 |
Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique |
|
DS DS/EN 61094- 4 |
Measurement microphones - Part 4: Specifications for working standard microphones |
|
DS DS/EN 61094- 5 |
Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison |
|
DS DS/EN 61094- 6 |
Measurement microphones Part 6: Electrostatic actuators for determination of frequency response |
|
DS DS/EN 61101 |
The absolute calibration of hydrophones using the planar scanning technique in the frequency range 0,5 MHz to 15 MHz |
|
DS DS/EN 61102+A1 |
Measurement and characterisation of ultrasonic fields using hydrophones in the frequency range 0,5 MHz to 15 MHz |
|
DS DS/EN 61115 |
Expression of performance of sample handling systems for process analyzers |
|
DS DS/EN 61161+A1 |
Ultrasonic power measurement in liquids in the frequency range 0,5 MHz to 25 MHz |
|
DS DS/EN 61183 |
Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters |
|
DS DS/EN 61252/A1 |
Electroacoustics - Specifications for personal sound exposure meters-(AMENDS DS/EN 61252) |
|
DS DS/EN 61260 |
Electroacoustics - Octave-band and fractional-octave-band filters |
|
DS DS/EN 61260/A1 |
Electroacoustics - Octave-band and fractional-octave-band filters- (AMENDS DS/EN 61260) |
|
DS DS/EN 61265 |
Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-category aeroplanes |
|
DS DS/EN 61268 |
Alternating current static var-hour meters for reactive energy (Classes 2 and 3) |
|
DS DS/EN 61340-3- 1 |
Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) - Component testing |
|
DS DS/EN 61340-3- 2 |
Electrostatics - Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) - Component testing |
|
DS DS/EN 61340-4- 1 |
Electrostatics Part 4-1: Standard test methods for specific applications Electrical resistance of floor coverings and installed floors |
|
DS DS/EN 61340-4- 3 |
Electrostatics - Part 4-3: Standard test methods for specific applications - Footwear |
|
DS DS/EN 61358 |
Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2) |
|
DS DS/EN 61400- 11 |
Wind turbine generator systems - Part 11: Acoustic noise measurement techniques |
|
DS DS/EN 61515 |
Mineral insulated thermocouple cables and thermocouples |
|
DS DS/EN 61557- 1 |
Electrical safety in low voltage distribution systems up to 1 kV a.c. and 1,5 kV d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements |
|
DS DS/EN 61557- 10 |
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective meas |
|
DS DS/EN 61557- 2 |
Electrical safety in low voltage distribution systems up to 1 kV a.c. and 1,5 kV d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance |
|
DS DS/EN 61557- 6 |
Electrical safety in low voltage distribution systems up to 1 kV a.c. and 1,5 kV d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Residual current devices (RCD) in TT, TN and IT systems |
|
DS DS/EN 61557- 9 |
Electrical safety in low voltage distribution systems up to 1 kV a.c. and 1,5 kV d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems |
|
DS DS/EN 61669 |
Electroacoustics - Equipment for the measurement of real-ear acoustical characteristics of hearing aids |
|
DS DS/EN 61672- 1 |
Electroacoustics - Sound level meters - Part 1: Specifications |
|
DS DS/EN 61672- 2 |
Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests |
|
DS DS/EN 62056- 31 |
Electricity metering - Data exchange for meter reading, tariff and load control - Part 31: Use of local area networks on twisted pair with carrier signalling |
|
DS DS/EN 62092 |
Ultrasonics - Hydrophones - Characteristics and calibration in the frequency range from 15 MHz til 40 MHz |
|
DS DS/EN 62226-2- 1 |
Exposure to electric or magnetic fields in the low and intermediate frequency range Methods for calculating the current density and internal electric field induced in the human body Part 2-1: Exposure to magnetic fields 2D models |
|
DS DS/EN 837- 1 |
Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing |
|
DS DS/EN 837- 1/AC |
Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing |
|
DS DS/EN 837- 2 |
Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges |
|
DS DS/EN 837- 3 |
Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing |
|
DS DS/EN ISO 1 |
Geometrical Product Specifications (GPS) - Standard reference temperature for geometrical product specification and verification |
|
DS DS/EN ISO 10012 |
Measurement management systems - Requirements for measurement processes and measuring equipment |
|
DS DS/EN ISO 10360- 1 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary |
|
DS DS/EN ISO 10360- 2 |
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring size |
|
DS DS/EN ISO 10360- 3 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis |
|
DS DS/EN ISO 10360- 4 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode |
|
DS DS/EN ISO 10360- 5 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using multiple-stylus probing systems |
|
DS DS/EN ISO 10360- 6 |
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features |
|
DS DS/EN ISO 1042 |
Laboratory glassware - One-mark volumetric flasks |
|
DS DS/EN ISO 10534- 1 |
Acoustics - Determination of sound absorption coefficient and impedance in impedance tubes - Part 1: Method using standing wave ratio |
|
DS DS/EN ISO 10534- 2 |
Acoustics - Determination of sound absorption coefficient and impedance in impedance tubes - Part 2: Transfer-function method |
|
DS DS/EN ISO 10846- 1 |
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines |
|
DS DS/EN ISO 10846- 2 |
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Dynamic stiffness of elastic supports for translatory motion - Direct method |
|
DS DS/EN ISO 10846- 3 |
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion |
|
DS DS/EN ISO 10846- 4 |
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion |
|
DS DS/EN ISO 1119 |
Geometrical product specifications (GPS) - Series of conical tapers and taper angles |
|
DS DS/EN ISO 11200 |
Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions |
|
DS DS/EN ISO 11200/AC |
Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions |
|
DS DS/EN ISO 11201 |
Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane |
|
DS DS/EN ISO 11201/AC |
Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane |
|
DS DS/EN ISO 11202 |
Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ |
|
DS DS/EN ISO 11203 |
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
|
DS DS/EN ISO 11204 |
Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Method requiring environmental corrections |
|
DS DS/EN ISO 11204/AC |
Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Method requiring environmental corrections |
|
DS DS/EN ISO 11205 |
Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity |
|
DS DS/EN ISO 11546- 1 |
Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) |
|
DS DS/EN ISO 11546- 2 |
Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) |
|
DS DS/EN ISO 11562 |
Geometrical product specifications (GPS) - Surface texture: Profile method - Metrological characteristics of phase correct filters |
|
DS DS/EN ISO 11688- 1 |
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning |
|
DS DS/EN ISO 11688- 2 |
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design |
|
DS DS/EN ISO 11689 |
Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment |
|
DS DS/EN ISO 11819- 1 |
Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical Pass-By method |
|
DS DS/EN ISO 11821 |
Acoustics - Measurement of the in situ sound attenuation of a removable screen |
|
DS DS/EN ISO 11904- 1 |
Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 1: Technique using a microphone in a real ear (MIRE technique) |
|
DS DS/EN ISO 11904- 2 |
Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 2: Technique using a manikin |
|
DS DS/EN ISO 11957 |
Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements |
|
DS DS/EN ISO 12001 |
Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code |
|
DS DS/EN ISO 12001/AC |
Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code |
|
DS DS/EN ISO 12085 |
Geometrical product specification (GPS) - Surface texture: Profile method - Motif parameters |
|
DS DS/EN ISO 12179 |
Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments |
|
DS DS/EN ISO 1302 |
Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation |
|
DS DS/EN ISO 13565- 1 |
Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions |
|
DS DS/EN ISO 13565- 2 |
Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve |
|
DS DS/EN ISO 13565- 3 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 3: Height characterization using the material propability curve |
|
DS DS/EN ISO 13920 |
Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position |
|
DS DS/EN ISO 14163 |
Acoustics - Guidelines for noise control by silencers |
|
DS DS/EN ISO 14253- 1 |
Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformance or non-conformance with specifications |
|
DS DS/EN ISO 14509 |
Small craft - Measurement of airborne sound emitted by powered recreational craft |
|
DS DS/EN ISO 14509/A1 |
Small craft - Measurement of airborne sound emitted by powered recreational craft-(AMENDS DS/EN ISO 14509) |
|
DS DS/EN ISO 14660- 1 |
Geometrical Product Specifications (GPS) - Geometrical features - Part 1: General terms and definitions |
|
DS DS/EN ISO 14660- 2 |
Geometrical Product Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature |
|
DS DS/EN ISO 15212- 1 |
Oscillation-type density meters - Part 1: Laboratory instruments |
|
DS DS/EN ISO 15212- 2 |
Oscillation-type density meters - Part 2: Process instruments for homogenous liquids |
|
DS DS/EN ISO 15667 |
Acoustics - Guidelines for noise control by enclosures and cabins |
|
DS DS/EN ISO 15744 |
Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) |
|
DS DS/EN ISO 16032 |
Acoustics - Measurement of sound pressure level from service equipment in buildings - Engineering method |
|
DS DS/EN ISO 1680 |
Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines |
|
DS DS/EN ISO 17201- 1 |
Acoustics Noise from shooting ranges Part 1: Determination of muzzle blast by measurement |
|
DS DS/EN ISO 2151 |
Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) |
|
DS DS/EN ISO 22868 |
Forestry machinery Noise test code for portable hand-held machines with internal combustion engine Engineering method (Grade 2 accuracy)- Supersedes DS/EN 27182:1992, DS/EN 27917:1993, DS/ISO 9207:1995, DS/ISO 10884:1997, DS/ISO 7182:1991 and DS/ISO 79 |
|
DS DS/EN ISO 2538 |
Geometrical product specifications (GPS) - Series of angles and slopes on prisms |
|
DS DS/EN ISO 266 |
Acoustics - Preferred frequencies |
|
DS DS/EN ISO 2922 |
Acoustics - Measurement of airborne sound emitted by vessels on inland water-ways and harbours |
|
DS DS/EN ISO 3095 |
Railway applications Acoustics Measurement of noise emitted by railbound vehicles |
|
DS DS/EN ISO 3274 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments |
|
DS DS/EN ISO 3381 |
Railway applications Acoustics Measurement of noise inside railbound vehicles |
|
DS DS/EN ISO 3650 |
Geometrical product specification (GPS) - Length standards - Gauge blocks |
|
DS DS/EN ISO 3740 |
Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards |
|
DS DS/EN ISO 3741 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms |
|
DS DS/EN ISO 3743- 1 |
Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields - Part 1: Comparison method in hard-walled test rooms |
|
DS DS/EN ISO 3743- 2 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms |
|
DS DS/EN ISO 3744 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane |
|
DS DS/EN ISO 3745 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for anechoic and hemi-anechoic rooms |
|
DS DS/EN ISO 3746 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane |
|
DS DS/EN ISO 3746/AC |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane |
|
DS DS/EN ISO 3747 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method for use in situ |
|
DS DS/EN ISO 3822- 1 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement |
|
DS DS/EN ISO 3822- 2 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves |
|
DS DS/EN ISO 3822- 3 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in- line valves and appliances |
|
DS DS/EN ISO 3822- 4 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances |
|
DS DS/EN ISO 385 |
Laboratory glassware Burettes |
|
DS DS/EN ISO 4287 |
Geometrical product specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters |
|
DS DS/EN ISO 4288 |
Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture |
|
DS DS/EN ISO 4375 |
Hydrometric determinations - Cableway systems for stream gauging |
|
DS DS/EN ISO 4788 |
Laboratory glassware Graduated measuring cylinders |
|
DS DS/EN ISO 4871 |
Acoustics - Declaration and verification of noise emission values of machinery and equipment |
|
DS DS/EN ISO 5135 |
Acoustics - Determination of sound power levels of noise from air- terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room |
|
DS DS/EN ISO 5136 |
Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method |
|
DS DS/EN ISO 5167- 1 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements |
|
DS DS/EN ISO 5167- 2 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates |
|
DS DS/EN ISO 5167- 3 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles |
|
DS DS/EN ISO 5167- 4 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes |
|
DS DS/EN ISO 5436- 1 |
Geometrical product specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures |
|
DS DS/EN ISO 5436- 2 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards |
|
DS DS/EN ISO 6416 |
Hydrometry Measurement of discharge by the ultrasonic (acoustic) method |
|
DS DS/EN ISO 6817 |
Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters |
|
DS DS/EN ISO 6926 |
Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels |
|
DS DS/EN ISO 748 |
Measurement of liquid flow in open channels - Velocity-area methods |
|
DS DS/EN ISO 772 |
Hydrometric determinations - Vocabulary and symbols-Amendment 1: 6/30/2004; Amendment 2: 10/10/2005 |
|
DS DS/EN ISO 7779 |
Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment |
|
DS DS/EN ISO 7779/A1 |
Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment - Amendment 1: Noise measurement specification for CD/DVD-ROM drives-(AMENDS DS/EN ISO 7779) |
|
DS DS/EN ISO 7944 |
Optics and optical instruments - Reference wavelengths |
|
DS DS/EN ISO 8655- 1 |
Piston-operated volumetric apparatus - Part 1: Terminology, general requirements and user recommendations |
|
DS DS/EN ISO 8655- 2 |
Piston-operated volumetric apparatus - Part 2: Piston pipettes |
|
DS DS/EN ISO 8655- 3 |
Piston-operated volumetric apparatus - Part 3: Piston burettes |
|
DS DS/EN ISO 8655- 4 |
Piston-operated volumetric apparatus - Part 4: Dilutors |
|
DS DS/EN ISO 8655- 5 |
Piston-operated volumetric apparatus - Part 5: Dispensers |
|
DS DS/EN ISO 8655- 6 |
Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error |
|
DS DS/EN ISO 8655- 7 |
Piston-operated volumetric apparatus Part 7: Nongravimetric methods for the assessment of equipment performance |
|
DS DS/EN ISO 8785 |
Geometrical Product Specification (GPS) - Surface imperfections - Terms, definitions and parameters |
|
DS DS/EN ISO 9300 |
Measurement of gas flow by means of critical flow Venturi nozzles |
|
DS DS/EN ISO 9614- 1 |
Acoustics. Determination of sound power levels of noise sources using sound intensity. Part 1: Measurement at discrete points |
|
DS DS/EN ISO 9614- 2 |
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning |
|
DS DS/EN ISO 9614- 3 |
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning |
|
DS DS/EN ISO 9902- 1 |
Textile machinery - Noise test code - Part 1: Common requirements |
|
DS DS/EN ISO 9902- 2 |
Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery |
|
DS DS/EN ISO 9902- 3 |
Textile machinery - Noise test code - Part 3: Nonwoven machinery |
|
DS DS/EN ISO 9902- 4 |
Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery |
|
DS DS/EN ISO 9902- 5 |
Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery |
|
DS DS/EN ISO 9902- 6 |
Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery |
|
DS DS/EN ISO 9902- 7 |
Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery |
|
DS DS/ENV 12102 |
Air conditioners, heat pumps and dehumidifiers with electrically driven compressors - Measurement of airborne noise - Determination of the sound power level |
|
DS DS/ENV 13005 |
Guide to the expression of uncertainty in measurement |
|
DS DS/ENV 14028 |
Hydrometry - The application of propeller-type current meters and their calibration |
|
DS DS/ENV ISO 14253- 2 |
Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipments - Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verfication |
|
DS DS/HD 368 S1 |
Direct acting recording electrical measuring instruments and their accessories |
|
DS DS/IEC 126 |
IEC reference coupler for the measurement of hearing aids using earphones coupled to the ear by means of ear inserts |
|
DS DS/IEC 781 |
Application guide for calculation of short-circuit currents in low-voltage radial systems |
|
DS DS/INF 60 |
Surface roughness - Vocabulary for Nordic terms for the surface and its parameters |
|
DS DS/ISO 10302 |
Acoustics - Method for the measurement of airborne noise emitted by small air-moving devices |
|
DS DS/ISO 10816- 1 |
Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 1: General guidelines |
|
DS DS/ISO 10816- 2 |
Mechanical vibration - Evaluation of machine vibration by measurement on non-rotating parts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min |
|
DS DS/ISO 10843 |
Acoustics - Methods for the description and physical measurement of single impulses or series of impulses |
|
DS DS/ISO 10844 |
Acoustics - Specification of test tracks for the purpose of measuring noise emitted by road vehicles |
|
DS DS/ISO 11094 |
Acoustics - Test code for the measurement of airborne noise emitted by power lawn mowers, lawn tractors, lawn and garden tractors, professional mowers, and lawn and garden tractors with mowing attachments |
|
DS DS/ISO 11562 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Metrological characteristics of phase correct filters |
|
DS DS/ISO 11843- 1 |
Capability of detection - Part 1: Terms and definitions |
|
DS DS/ISO 11843- 1/CORR.1 |
Capability of detection - Part 1: Terms and definitions |
|
DS DS/ISO 11843- 2 |
Capability of detection - Part 2: Methodology in the linear calibration case |
|
DS DS/ISO 11843- 3 |
Capability of detection - Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used |
|
DS DS/ISO 11843- 4 |
Capability of detection - Part 4: Methodology for comparing the minimum detectable value with a given value |
|
DS DS/ISO 12124 |
Acoustics - Procedures for the measurement of real-ear acoustical characteristics of hearing aids |
|
DS DS/ISO 13261- 1 |
Sound power rating of air-conditioning and air-source heat pump equipment - Part 1: Non-ducted outdoor equipment |
|
DS DS/ISO 13261- 2 |
Sound power rating of air-conditioning and air-source heat pump equipment - Part 2: Non-ducted indoor equipment |
|
DS DS/ISO 13347- 1 |
Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 1: General overview |
|
DS DS/ISO 13347- 2 |
Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 2: Reverberant room method |
|
DS DS/ISO 13347- 3 |
Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 3: Enveloping surface methods |
|
DS DS/ISO 13347- 4 |
Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 4: Sound intensity method |
|
DS DS/ISO 13472- 1 |
Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 1: Extended surface method |
|
DS DS/ISO 13475- 1 |
Acoustics - Stationary audible warning devices used outdoors - Part 1: Field measurements for determination of sound emission quantities |
|
DS DS/ISO 1502 |
ISO general-purpose metric screw threads - Gauges and gauging |
|
DS DS/ISO 15664 |
Acoustics - Noise control design procedures for open plant |
|
DS DS/ISO 15665 |
Acoustics - Acoustic insulation for pipes, valves and flanges |
|
DS DS/ISO 15665/CORR.1 |
Acoustics - Acoustic insulation for pipes, valves and flanges |
|
DS DS/ISO 16 |
Acoustics - Standard tuning frequency (Standard musical pitch) |
|
DS DS/ISO 16063- 1 |
Methods for the calibration of vibration and shock transducers - Part 1: Basic concepts |
|
DS DS/ISO 1683 |
Acoustics - Preferred reference quantities for acoustic levels |
|
DS DS/ISO 17 |
Guide for the use of preferred numbers and of series of preferred numbers |
|
DS DS/ISO 1880 |
Instruments for the measurement of surface roughness by the profile method - Contact (stylus) instruments of progressive profile transformation - Profile recording instruments |
|
DS DS/ISO 286- 2 |
ISO system of limits and fits - Part 2: Tables of standard tolerance grades and limit deviation for holes and shafts |
|
DS DS/ISO 2923 |
Acoustics - Measurement of noise on board vessels |
|
DS DS/ISO 2923/COR.1 |
Acoustics - Measurement of noise on board vessels |
|
DS DS/ISO 3 |
Preferred numbers - Series of preferred numbers |
|
DS DS/ISO 3274 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments |
|
DS DS/ISO 362 |
Acoustics - Measurement of noise emitted by accelerating road vehicles - Engineering method |
|
DS DS/ISO 370 |
Toleranced dimensions - Conversion from inches into millimeters and vice versa |
|
DS DS/ISO 3744 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane |
|
DS DS/ISO 4185 |
Measurement of liquid flow in closed conduits - Weighing method |
|
DS DS/ISO 4291 |
Methods for the assessment of departure from roundness - Measurement of variations in radius |
|
DS DS/ISO 4292 |
Methods for the assessment of departure from roundness - Measurement by two- and three-point methods |
|
DS DS/ISO 4872 |
Acoustics - Measurement of airborne noise emitted by construction equipment intended for outdoor use - Method for determining compliance with noise limits |
|
DS DS/ISO 5128 |
Acoustics - Measurement of noise inside motor vehicles |
|
DS DS/ISO 5129 |
Acoustics - Measurement of sound pressure levels in the interior of aircraft during flight |
|
DS DS/ISO 5130 |
Acoustics - Measurement of noise emitted by stationary road vehicles - Survey method |
|
DS DS/ISO 5131 |
Acoustics - Tractors and machinery for agriculture and forestry - Measurement of noise at the operator´s position - Survey method |
|
DS DS/ISO 532 |
Acoustics - Method for calculating loudness level |
|
DS DS/ISO 5348 |
Mechanical vibration and shock - Mechanical mounting of accelerometers |
|
DS DS/ISO 6190 |
Acoustics - Measurement of sound pressure levels of gas turbine installations for evaluating environmental noise - Survey method |
|
DS DS/ISO 6318 |
Measurement of roundness - Terms, definitions and parameters of roundness |
|
DS DS/ISO 6395 |
Acoustics - Measurement of exterior noise emitted by earthmoving machinery - Dynamic test conditions |
|
DS DS/ISO 6395/Amd.1 |
Acoustics - Measurement of exterior noise emitted by earth- moving machinery - Dynamic test conditions-(AMENDS DS/ISO 6395) |
|
DS DS/ISO 6396 |
Acoustics - Measurement at the operator´s position of noise emitted by earth-moving machinery - Dynamic test conditions |
|
DS DS/ISO 6798 |
Reciprocating internal combustion engines - Measurement of emitted airborne noise - Engineering method and survey method |
|
DS DS/ISO 7196 |
Acoustics - Frequency-weighting characteristics for infrasound measurements |
|
DS DS/ISO 7216 |
Acoustics - Agricultural and forestry wheeled tractors and self- propelled machines - Measurement of noise emitted when in motion |
|
DS DS/ISO 7574/1 |
Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 1: General considerations and definitions |
|
DS DS/ISO 7574/3 |
Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment. - Part 3: Simple (transition) method for stated values for batches of machines |
|
DS DS/ISO 7574/4 |
Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 4: Methods for stated values for batches of machines |
|
DS DS/ISO 7724/3 |
Paints and varnishes - Colorimetry - Part 3: Calculations of colour differences |
|
DS DS/ISO 7863 |
Height setting micrometers and riser blocks |
|
DS DS/ISO 8297 |
Acoustics - Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment - Engineering method |
|
DS DS/ISO 8528- 10 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 10: Measurement of airborne noise by the enveloping surface method |
|
DS DS/ISO 8579- 1 |
Acceptance code for gear units - Part 1: Test code for airborne sound |
|
DS DS/ISO 9053 |
Acoustics - Materials for acoustical applications - Determination of airflow resistance |
|
DS DS/ISO 9611 |
Acoustics - Characterization of sources of structure-borne sound with respect to sound radiation from connected structures - Measurement of velocity at the contact points of machinery when resiliently mounted |
|
DS DS/ISO 9613- 1 |
Acoustics - Attenuation of sound during propagation outdoors - Part 1: Calculation of the absorption of sound by the atmosphere |
|
DS DS/ISO 9613- 2 |
Acoustics - Attenuation of sound during propagation outdoors - Part 2: General method of calculation |
|
DS DS/ISO/R 1938 |
ISO-system of limits and fits - Inspection of plain work pieces |
|
DS DS/ISO/TR 20461 |
Determination of uncertainty for volume measurements made using the gravemetric method |
|
DS DS/ISO/TS 13475- 2 |
Acoustics - Stationary audible warning devices used outdoors - Part 2: Precision methods for determination of sound emission quantities |
|
DS DS/ISO/TS 14253- 2 |
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guide to the estimation of uncertainty in measurement, in calibration of measuring equipment and in product verfication |
|
DS DS/ISO/TS 21748 |
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation |
|
DS DS/ISO/TS 21749 |
Measurement and uncertainty for metrological applications Repeated measurements and nested experiments |