|
DS DS/EN 13124- 2 |
Windows, doors and shutters - Explosion resistance - Test method - Part 2: Range test |
|
DS DS/EN 13137 |
Characterization of waste - Determination of total organic carbon (TOC) in waste, sludges and sediments |
|
DS DS/EN 13158 |
Protective clothing - Protective jackets, body and shoulder protectors for horse riders - Requirements and test methods |
|
DS DS/EN 13178 |
Personal eye-protection - Eye protectors for snowmobile users |
|
DS DS/EN 132 |
Respiratory protective devices - Definitions of terms and pictograms |
|
DS DS/EN 13202 |
Ergonomics of the thermal environment - Temperatures of touchable hot surfaces - Guidance for establishing surface temperature limit values in product standards with the aid of EN 563 |
|
DS DS/EN 13204 |
Double acting hydraulic rescue tools for fire and rescue service use |
|
DS DS/EN 13205 |
Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations |
|
DS DS/EN 13211 |
Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury |
|
DS DS/EN 13237 |
Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
|
DS DS/EN 13238 |
Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
|
DS DS/EN 13257 |
Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals-AC: 11/27/2003; Amendment 1: 04/04/2005 |
|
DS DS/EN 13265 |
Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects-AC:12/17/2003; Amendment 1:04/04/2005 |
|
DS DS/EN 13274- 1 |
Respiratory protective devices - Methods of test - Part 1: Determination of inward leakage and total inward leakage |
|
DS DS/EN 13274- 2 |
Respiratory protective devices - Methods of test - Part 2: Practical performance tests |
|
DS DS/EN 13274- 3 |
Respiratory protective devices - Methods of test - Part 3: Determination of breathing resistance |
|
DS DS/EN 13274- 4 |
Respiratory protective devices - Methods of test - Part 4: Flame tests |
|
DS DS/EN 13274- 5 |
Respiratory protective devices - Methods of test - Part 5: Climatic conditions |
|
DS DS/EN 13274- 6 |
Respiratory protective devices - Methods of test - Part 6: Determination of carbon dioxide content of the inhalation air |
|
DS DS/EN 13274- 7 |
Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration |
|
DS DS/EN 13274- 8 |
Respiratory protective devices - Methods of test - Part 8: Determination of dolomite dust clogging |
|
DS DS/EN 13277- 1 |
Protective equipment for martial arts - Part 1: General requirements and test methods |
|
DS DS/EN 13277- 2 |
Protective equipment for martial arts - Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors |
|
DS DS/EN 13277- 3 |
Protective equipment for martial arts - Part 3: Additional requirements and test methods for trunk protectors |
|
DS DS/EN 13277- 4 |
Protective equipment for martial arts - Part 4: Additional requirements and test methods for head protectors |
|
DS DS/EN 13277- 5 |
Protective equipment for martial arts - Part 5: Additional requirements and test methods for genital protectors and abdominal protectors |
|
DS DS/EN 13277- 6 |
Protective equipment for martial arts - Part 6: Additional requirements and test methods for breast protectors for females |
|
DS DS/EN 13284- 1 |
Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method |
|
DS DS/EN 13284- 2 |
Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems |
|
DS DS/EN 13287 |
Personal protective equipment - Footwear - Test method for slip resistance |
|
DS DS/EN 133 |
Respiratory protective devices - Classification |
|
DS DS/EN 13342 |
Characterisation of sludges - Determination of total Kjeldahl nitrogen |
|
DS DS/EN 13346 |
Characterization of sludges - Determination of trace elements and phosphorus - Aqua regia extraction methods |
|
DS DS/EN 13356 |
Visibility accessories for non-professional use - Test methods and requirements |
|
DS DS/EN 13370 |
Characterization of waste - Analysis of eluates - Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN-, F- |
|
DS DS/EN 134 |
Respiratory protective devices - Nomenclature of components |
|
DS DS/EN 13427 |
Packaging - Requirements for the use of European Standards in the field of packaging and packaging waste |
|
DS DS/EN 13428 |
Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction |
|
DS DS/EN 13429 |
Packaging - Reuse |
|
DS DS/EN 13430 |
Packaging - Requirements for packaging recoverable by material recycling |
|
DS DS/EN 13431 |
Packaging - Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value |
|
DS DS/EN 13432 |
Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging-Corrigendum:7/21/2005 |
|
DS DS/EN 13437 |
Packaging and material recycling - Criteria for recycling methods - Description of recycling processes and flow chart |
|
DS DS/EN 13439 |
Packaging - Rate of energy recovery - Definition and method of calculation |
|
DS DS/EN 13440 |
Packaging - Rate of recycling - Definition and method of calculation |
|
DS DS/EN 13463- 1 |
Non-electrical equipment for potentially explosive atmospheres - Part 1: Basic method and requirements |
|
DS DS/EN 13463- 1/AC |
Non-electrical equipment for potentially explosive atmospheres - Part 1: Basic method and requirements |
|
DS DS/EN 13463- 2 |
Non-electrical equipment indented for use in potentially explosive atmospheres Part 2: Protection by flow restricting enclosure "fr" |
|
DS DS/EN 13463- 5 |
Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety "c" |
|
DS DS/EN 13463- 8 |
Non-electrical equipment for potentially explosive atmospheres - Part 8: Protection by liquid immersion ´k´ |
|
DS DS/EN 13478 |
Safety of machinery - Fire prevention and protection |
|
DS DS/EN 13484 |
Helmets for users of luges |
|
DS DS/EN 13490 |
Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration |
|
DS DS/EN 13492 |
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment |
|
DS DS/EN 13493 |
Geosynthetic barriers Characteristics required for use in the construction of solid waste storage and disposal sites |
|
DS DS/EN 135 |
Respiratory protective devices - List of equivalent terms |
|
DS DS/EN 13501- 1 |
Fire classification of construction products and building elements - Part 1: Classification using test data from reaction to fire tests |
|
DS DS/EN 13501- 2 |
Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
|
DS DS/EN 13506 |
Water quality - Determination of mercury by atomic flourescence spectrometry |
|
DS DS/EN 13526 |
Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon in flue gases from solvent using processes - Continuous flame ionisation detector method |
|
DS DS/EN 13528- 1 |
Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1: General requirements |
|
DS DS/EN 13528- 2 |
Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 2: Specific requirements and test methods |
|
DS DS/EN 13528- 3 |
Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Part 3: Guide to selection, use and maintenance |
|
DS DS/EN 13541 |
Glass in building - Security glazing - Testing and classification of resistance against explosion pressure |
|
DS DS/EN 13546 |
Protective clothing - Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players - Requirements and test methods |
|
DS DS/EN 13565- 1 |
Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components |
|
DS DS/EN 13567 |
Protective clothing - Hand, arm, chest, abdomen, leg, genital and face protectors for fencers - Requirements and test methods |
|
DS DS/EN 13592 |
Plastics sacks for household waste collection - Types, requirements and test methods-Corrigendum:7/21/2005 |
|
DS DS/EN 13594 |
Protective gloves for professional motorcycle riders - Requirements and test methods |
|
DS DS/EN 13595- 1 |
Protective clothing for professional motorcycle riders - Jackets, trousers and one piece or divided suits - Part 1: General requirements |
|
DS DS/EN 13595- 2 |
Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 2: Test method for determination of impact abrasion resistance |
|
DS DS/EN 13595- 3 |
Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 3: Test method for determination of burst strength |
|
DS DS/EN 13595- 4 |
Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 4: Test method for determination of impact cut resistance |
|
DS DS/EN 136 |
Respiratory protective devices - Full-face masks - Requirements, testing, marking |
|
DS DS/EN 136/AC |
Respiratory protective devices - Full-face masks - Requirements, testing, marking |
|
DS DS/EN 136/AC |
Respiratory protective devices - Full face masks - Requirements, testing, marking |
|
DS DS/EN 1363- 1 |
Fire resistance tests - Part 1: General requirements |
|
DS DS/EN 1363- 2 |
Fire resistance tests - Part 2: Alternative and additional procedures |
|
DS DS/EN 13634 |
Protective footwear for professional motorcycle riders - Requirements and test methods |
|
DS DS/EN 1364- 1 |
Fire resistance tests for non-loadbearing elements - Part 1: Walls |
|
DS DS/EN 1364- 2 |
Fire resistance tests for non-loadbearing elements - Part 2: Ceilings |
|
DS DS/EN 13649 |
Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Activated carbon and solvent desorption method |
|
DS DS/EN 1365- 1 |
Fire resistance tests for loadbearing elements - Part 1: Walls |
|
DS DS/EN 1365- 2 |
Fire resistance tests for loadbearing elements - Part 2: Floors and roofs |
|
DS DS/EN 1365- 3 |
Fire resistance tests for loadbearing elements - Part 3: Beams |
|
DS DS/EN 1365- 4 |
Fire resistance tests for loadbearing elements - Part 4: Columns |
|
DS DS/EN 13656 |
Characterization of waste - Microwave assisted digestion with hydrofluoric (HF), nitric (HNO3) and hydrochloric (HCl) acid mixture for subsequent determination of elements |
|
DS DS/EN 13657 |
Characterization of waste - Digestion for subsequent determination of aqua regia soluble portion of elements |
|
DS DS/EN 1366- 1 |
Fire resistance tests for service installations - Part 1: Ducts |
|
DS DS/EN 1366- 2 |
Fire resistance tests for service installations - Part 2: Fire dampers |
|
DS DS/EN 1366- 3 |
Fire resistance tests for service installations - Part 3: Penetration seals |
|
DS DS/EN 1366- 5 |
Fire resistance tests for service installations - Part 5: Service ducts and shafts |
|
DS DS/EN 1366- 7 |
Fire resistance tests for service installations - Part 7: Conveyor systems and their closures |
|
DS DS/EN 1366- 8 |
Fire resistance tests for service installations - Part 8: Smoke extraction ducts |
|
DS DS/EN 13673- 1 |
Determination of the maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Part 1: Determination of the maximum explosion pressure |
|
DS DS/EN 13673- 2 |
Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours Part 2: Determination of the maximum rate of explosion pressure rise |
|
DS DS/EN 137 |
Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus - Requirements, testing, marking |
|
DS DS/EN 137/AC |
Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus - Requirements, testing, marking - Corrigendum |
|
DS DS/EN 13725 |
Air quality - Determination of odour concentration by dynamic olfactometry |
|
DS DS/EN 13772 |
Textiles and textile products - Burning behaviour - Curtains and drapes - Measurement of flame spread of vertically oriented specimens with large ignition source |
|
DS DS/EN 13773 |
Textiles and textile products - Burning behaviour - Curtains and drapes - Classification scheme |
|
DS DS/EN 13781 |
Protective helmets for drivers and passengers of snowmobiles and bobsleighs |
|
DS DS/EN 13794 |
Respiratory protective devices - Self-cointained closed-circuit breathing apparatus for escape - Requirements, testing, marking |
|
DS DS/EN 138 |
Respiratory protective devices - Fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly - Requirements, testing, marking |
|
DS DS/EN 13819- 1 |
Hearing protectors - Testing - Part 1: Physical test methods |
|
DS DS/EN 13819- 2 |
Hearing protectors - Testing - Part 2: Acoustic test methods |
|
DS DS/EN 13821 |
Potentially explosive atmospheres - Explosion prevention and protection - Determination of minimum ignition energy of dust/air mixtures |
|
DS DS/EN 13823 |
Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
|
DS DS/EN 1384 |
Helmets for equestrian activities |
|
DS DS/EN 1384/A1 |
Helmets for equestrian activities-(AMENDS DS/EN 1384) |
|
DS DS/EN 1385 |
Helmets for canoeing and white water sports-Amendment 1: 03/31/2005 |
|
DS DS/EN 13861 |
Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
|
DS DS/EN 13890 |
Workplace atmospheres - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods |
|
DS DS/EN 13911 |
Protective clothing for firefighters - Requirements and test methods for fire hoods for firefighters |
|
DS DS/EN 13920- 1 |
Aluminium and aluminium alloys - Scrap - Part 1: General requirements, sampling and tests |
|
DS DS/EN 13920- 10 |
Aluminium and aluminium alloys - Scrap - Part 10: Scrap consisting of used aluminium beverage cans |
|
DS DS/EN 13920- 11 |
Aluminium and aluminium alloys - Scrap - Part 11: Scrap from aluminium-copper radiators |
|
DS DS/EN 13920- 12 |
Aluminium and aluminium alloys - Scrap - Part 12: Turnings consisting of one single alloy |
|
DS DS/EN 13920- 13 |
Aluminium and aluminium alloys - Scrap - Part 13: Mixed turnings consisting of two or more alloys |
|
DS DS/EN 13920- 14 |
Aluminium and aluminium alloys - Scrap - Part 14: Scrap from post- consumer aluminium packagings |
|
DS DS/EN 13920- 15 |
Aluminium and aluminium alloys - Scrap - Part 15: Decoated aluminium scrap from post-consumer aluminium packagings |
|
DS DS/EN 13920- 16 |
Aluminium and aluminium alloys - Scrap - Part 16: Scrap consisting of skimmings, drosses, spills and metallics |
|
DS DS/EN 13920- 2 |
Aluminium and aluminium alloys - Scrap - Part 2: Unalloyed aluminium scrap |
|
DS DS/EN 13920- 3 |
Aluminium and aluminium alloys - Scrap - Part 3: Wire and cable scrap |
|
DS DS/EN 13920- 4 |
Aluminium and aluminium alloys - Scrap - Part 4: Scrap consisting of one single wrought alloy |
|
DS DS/EN 13920- 5 |
Aluminium and aluminium alloys - Scrap - Part 5: Scrap consisting of two or more wrought alloys of the same series |
|
DS DS/EN 13920- 6 |
Aluminium and aluminium alloys - Scrap - Part 6: Scrap consisting of two or more wrought alloys |
|
DS DS/EN 13920- 7 |
Aluminium and aluminium alloys - Scrap - Part 7: Scrap consisting of castings |
|
DS DS/EN 13920- 8 |
Aluminium and aluminium alloys - Scrap - Part 8: Scrap consisting of non- ferrous materials from shredding processes destined to aluminium separation processes |
|
DS DS/EN 13920- 9 |
Aluminium and aluminium alloys - Scrap - Part 9: Scrap from aluminium separation processes of non-ferrous shredded materials |
|
DS DS/EN 13946 |
Water quality - Guidance standard for the routine sampling and pretreatment of benthic diatoms from rivers |
|
DS DS/EN 13965- 1 |
Characterization of waste - Terminology - Part 1: Material related terms and definitions |
|
DS DS/EN 13965- 2 |
Characterization of waste - Terminology - Part 2: Management related terms and definitions |
|
DS DS/EN 13980 |
Potentially explosive atmospheres - Application of quality systems |
|
DS DS/EN 140 |
Respiratory protective devices - Halfmasks and quarter masks - Requirements, testing, marking |
|
DS DS/EN 140/AC |
Respiratory protective devices - Halfmasks and quarter masks - Requirements, testing, marking |
|
DS DS/EN 14011 |
Water quality - Sampling of fish with electricity |
|
DS DS/EN 14031 |
Workplace atmosphere - Determination of airborne endotoxins |
|
DS DS/EN 14034- 1 |
Determination of the explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust clouds |
|
DS DS/EN 14034- 4 |
Determination of the explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds |
|
DS DS/EN 14039 |
Characterization of waste Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography |
|
DS DS/EN 14042 |
Workplace atmospheres - Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents |
|
DS DS/EN 14045 |
Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions |
|
DS DS/EN 14046 |
Packaging - Evaluation of the ultimate aerobic biodegradability and disintegration of packaging materials under controlled composting conditions - Method by analysis of released carbon dioxide |
|
DS DS/EN 14058 |
Protective clothing - Garments for protection against cool environments |
|
DS DS/EN 14115 |
Textiles - Burning behaviour of materials for marquees, large tents and related products - Ease of ignition |
|
DS DS/EN 14120 |
Protective clothing - Wrist, palm, knee and elbow protectors for users of roller sports equipment - Requirements and test methods |
|
DS DS/EN 14126 |
Protective clothing - Performance requirements and tests methods for protective clothing against infective agents |
|
DS DS/EN 14126/AC |
Protective clothing - Performance requirements and tests methods for protective clothing against infective agents |
|
DS DS/EN 14135 |
Coverings - Determination of fire protection ability |
|
DS DS/EN 14181 |
Stationary source emissions - Quality assurance of automated measuring systems |
|
DS DS/EN 14184 |
Water quality - Guidance standard for the surveying of aquatic macrophytes in running waters |
|
DS DS/EN 142 |
Respiratory protective devices - Mouthpiece assemblies - Requirements, testing, marking |
|
DS DS/EN 1420- 1 |
Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems - Part 1: Test method |
|
DS DS/EN 14207 |
Water quality - Determination of epichlorohydrin |
|
DS DS/EN 14211 |
Ambient air quality Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence |
|
DS DS/EN 14212 |
Ambient air quality Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence |
|
DS DS/EN 14253 |
Mechanical vibration - Measurement and calculation of occupational exposure to whole-body vibration with reference to health - Practical guidance |
|
DS DS/EN 143 |
Respiratory protective devices - Particle filters - Requirements, testing, marking |
|
DS DS/EN 143/AC |
Respiratory protective devices - Particle filters - Requirements, testing, marking |
|
DS DS/EN 14325 |
Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages |
|
DS DS/EN 14326 |
Leather - Physical and mechanical tests - Determination of resistance to horizontal spread of flame |
|
DS DS/EN 14328 |
Protective clothing Gloves and armguards protecting against cuts by powered knives Requirements and test methods |
|
DS DS/EN 14339 |
Underground fire hydrants |
|
DS DS/EN 14345 |
Characterization of waste Determination of hydrocarbon content by gravimetry |
|
DS DS/EN 14360 |
Protective clothing against rain - Test method for ready made garments - Impact from above with high energy droplets |
|
DS DS/EN 14373 |
Explosion suppression systems |
|
DS DS/EN 14382 |
Safety devices for gas pressure regulating stations and installations Gas safety shut-off devices for inlet pressures up to 100 bar |
|
DS DS/EN 14384 |
Pillar fire hydrants |
|
DS DS/EN 14385 |
Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V |
|
DS DS/EN 14387 |
Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking |
|
DS DS/EN 14395- 1 |
Influence of organic materials on water intended for human consumption - Organoleptic assessment of water in storage systems - Part 1: Test method |
|
DS DS/EN 14404 |
Personal protective equipment - Knee protectors for work in the kneeling position |
|
DS DS/EN 144- 1 |
Respiratory protective devices - Gas cylinder valves - Part 1: Thread connections for insert connector-Amendment 1: 5/15/2003; Amendment 2: 9/08/2005 |
|
DS DS/EN 14412 |
Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance |
|
DS DS/EN 144- 2 |
Respiratory protective devices - Gas cylinder valves - Part 2: Outlet connections |
|
DS DS/EN 14435 |
Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only - Requirements, testing, marking |
|
DS DS/EN 14450 |
Secure storage units Requirements, classification and methods of test for resistance to burglary Secure safe cabinets |
|
DS DS/EN 14458 |
Personal eye-equipment - Faceshields and visors for use with firefighters´, and high performance industrial safety helmets used by firefighters, ambulance and emergency services |
|
DS DS/EN 14466 |
Fire fighting pumps Portable pumps Safety and performance requirements, tests |
|
DS DS/EN 145 |
Respiratory protective devices - Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type - Requirements, testing, marking |
|
DS DS/EN 145/A1 |
Respiratory protective devices - Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type - Requirements, testing, marking-(AMENDS DS/EN 145) |
|
DS DS/EN 14522 |
Determination of the auto ignition temperature of gases and vapours |
|
DS DS/EN 14529 |
Respiratory protective devices Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only |
|
DS DS/EN 14530 |
Workplace atmospheres - Determination of diesel particulate matter - General requirements |
|
DS DS/EN 14533 |
Textiles and textile products - Burning behaviour of bedding items - Classification scheme |
|
DS DS/EN 14540 |
Fire-fighting hoses - Non-percolating layflat hoses for fixed systems |
|
DS DS/EN 14583 |
Workplace atmospheres - Volumetric bioaerosol sampling devices - Requirements and test methods |
|
DS DS/EN 14593- 1 |
Respiratory protective devices Compressed air line breathing apparatus with demand valve Part 1: Apparatus with a full face mask Requirements, testing, marking- Supersedes DS/EN 139:1995, DS/EN 139/A1:1999, DS/EN 139/AC:1996, DS/EN 270:1995, DS/EN 27 |
|
DS DS/EN 14593- 2 |
Respiratory protective devices Compressed air line breathing apparatus with demand valve Part 2: Apparatus with a half mask at positive pressure Requirements, testing, marking-Supersedes DS/EN 139:1995, DS/EN 139/A1:1999, DS/EN 139/AC:1996, DS/EN 27 |
|
DS DS/EN 14594 |
Respiratory protective devices Continuous flow compressed air line breathing apparatus Requirements, testing, marking-Supersedes DS/EN 139:1995, DS/EN 139/A1:1999, DS/EN 139/AC:1996, DS/EN 270:1995, DS/EN 270/A1:2000, DS/EN 271:1995, DS/EN 271/A1:2000 |
|
DS DS/EN 14604 |
Smoke alarm devices |
|
DS DS/EN 14614 |
Water quality Guidance standard for assessing the hydromorphological features of rivers |
|
DS DS/EN 14625 |
Ambient air quality Standard method for the measurement of the concentration of ozone by ultraviolet photometry |
|
DS DS/EN 14626 |
Ambient air quality Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy |
|
DS DS/EN 14662- 1 |
Ambient air quality Standard method for measurement of benzene concentrations Part 1: Pumped sampling followed by thermal desorption and gas chromatography |
|
DS DS/EN 14662- 2 |
Ambient air quality Standard method for measurement of benzene concentrations Part 2: Pumped sampling followed by solvent desorption and gas chromatography |
|
DS DS/EN 14662- 3 |
Ambient Air Quality Standard method for the measurement of benzene concentrations Part 3: Automated pumped sampling with in situ gas chromatography |
|
DS DS/EN 14662- 4 |
Ambient air quality Standard method for measurement of benzene concentrations Part 4: Diffusive sampling followed by thermal desorption and gas chromatography |
|
DS DS/EN 14662- 5 |
Ambient air quality Standard method for measurement of benzene concentrations Part 5: Diffusive sampling followed by solvent desorption and gas chromatography |
|
DS DS/EN 14672 |
Characterization of sludges Determination of total phosphorus |
|
DS DS/EN 14710- 1 |
Fire-fighting pumps Fire-fighting centrifugal pumps without primer Part 1: Classification, general and safety requirements |
|
DS DS/EN 14710- 2 |
Fire-fighting pumps Fire-fighting centrifugal pumps without primer Part 2: Verification of general and safety requirements |
|
DS DS/EN 14735 |
Characterization of waste Preparation of waste samples for ecotoxicity tests |
|
DS DS/EN 14757 |
Water quality Sampling of fish with multimesh gillnets |
|
DS DS/EN 14789 |
Stationary source emissions Determination of volume concentration of oxygen (O2) Reference method Paramagnetism |
|
DS DS/EN 14790 |
Stationary source emissions Determination of the water vapour in ducts |
|
DS DS/EN 14791 |
Stationary source emissions Determination of mass concentration of sulphur dioxide Reference method |
|
DS DS/EN 14806 |
Packaging Preliminary evaluation of the disintegration of packaging materials under simulated composting conditions in a laboratory scale test |
|
DS DS/EN 148- 1 |
Respiratory protective devices - Threads for facepieces - Part 1: Standard thread connection |
|
DS DS/EN 148- 2 |
Respiratory protective devices - Threads for facepieces - Part 2: Centre thread connection |
|
DS DS/EN 1483 |
Water quality - Determination of mercury |
|
DS DS/EN 148- 3 |
Respiratory protective devices - Threads for facepieces - Part 3: Thread connection M 45 x 3 |
|
DS DS/EN 1484 |
Water analysis - Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC) |
|
DS DS/EN 1486 |
Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialized fire-fighting |
|
DS DS/EN 149 |
Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking |
|
DS DS/EN 149/AC |
Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking |
|
DS DS/EN 14902 |
Ambient air quality Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter |
|
DS DS/EN 14907 |
Ambient air quality Reference gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter |
|
DS DS/EN 1496 |
Rescue equipment - Rescue lifting devices |
|
DS DS/EN 1497 |
Rescue equipment - Rescue harnesses |
|
DS DS/EN 1498 |
Rescue equipment - Rescue loops |
|
DS DS/EN 1508 |
Water supply - Requirements for systems and components for the storage of water |
|
DS DS/EN 1522 |
Windows, doors, shutters and blinds - Bullet resistance - Requirements and classification |
|
DS DS/EN 1523 |
Windows, doors, shutters and blinds - Bullet resistance - Test method |
|
DS DS/EN 1540 |
Workplace atmospheres - Terminology |
|
DS DS/EN 15605 |
Protective clothing against liquid chemicals Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]) |
|
DS DS/EN 1568- 1 |
Fire extinguishing media - Foam concentrates - Part 1: Specification for medium expansion foam concentrates for surface application to water-immiscible liquids |
|
DS DS/EN 1568- 2 |
Fire extinguishing media - Foam concentrates - Part 2: Specification for high expansion foam concentrates for surface application to water-immiscible liquids |
|
DS DS/EN 1568- 3 |
Fire extinguishing media - Foam concentrates - Part 3: Specification for low expansion foam concentrates for surface application to water-immiscible liquids |
|
DS DS/EN 1568- 4 |
Fire extinguishing media - Foam concentrates - Part 4: Specification for low expansion foam concentrates for surface application to water-miscible liquids |
|
DS DS/EN 1598+A1 |
Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes |
|
DS DS/EN 1621- 1 |
Motorcyclists´ protective clothing against mechanical impact - Part 1: Requirements and test methods for impact protectors |
|
DS DS/EN 1621- 2 |
Motorcyclists´ protective clothing against mechanical impact - Part 2: Motorcyclists´ back protectors - Requirements and test methods |
|
DS DS/EN 1622 |
Water analysis - Determination of the threshold odour number (TON) and the threshold flavour number (TFN) |
|
DS DS/EN 1624 |
Textiles and textile products - Burning behaviour of industrial and technical textiles - Procedure to determine the flame spread of vertically oriented specimens |
|
DS DS/EN 1625 |
Textiles and textile products - Burning behaviour of industrial and technical textiles - Procedure to determine the ignitability of vertically oriented specimens |
|
DS DS/EN 1634- 1 |
Fire resistance tests for door and shutter assemblies - Part 1: Fire doors and shutters |
|
DS DS/EN 1634- 3 |
Fire resistance test for door and shutter assemblies - Part 3: Smoke control doors and shutters |
|
DS DS/EN 16387 |
Soil quality Effects of pollutants on Enchytraeidae (Enchytraeus sp.) Determination of effects on reproduction and survival |
|
DS DS/EN 165 |
Personal eye-protection - Vocabulary |
|
DS DS/EN 166 |
Personal eye protection - Specifications |
|
DS DS/EN 167 |
Personal eye-protection - Optical test methods |
|
DS DS/EN 168 |
Personal eye-protection - Non-optical test methods |
|
DS DS/EN 169 |
Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended use |
|
DS DS/EN 170 |
Personal eye-protection - Ultraviolet filters - Transmittance requirements and recommended use |
|
DS DS/EN 171 |
Personal eye-protection - Infrared filters - Transmittance requirements and recommended use |
|
DS DS/EN 172 |
Personal eye protection - Sunglare filters for industrial use |
|
DS DS/EN 172/A1 |
Personal eye protection - Sunglare filters for industrial use- (AMENDS DS/EN 172) |
|
DS DS/EN 172/A2 |
Personal eye protection - Sunglare filters for industrial use- (AMENDS DS/EN 172) |
|
DS DS/EN 1731+A1 |
Mesh type eye and face protectors for industrial and non-industrial use against mechanical hazards and/or heat |
|
DS DS/EN 174 |
Personal eye-protection - Ski goggles for downhill skiing |
|
DS DS/EN 1746 |
Safety of machinery - Guidance for the drafting of the noise clauses of safety standards |
|
DS DS/EN 175 |
Personal protection - Equipment for eye and face protection during welding and allied processes |
|
DS DS/EN 1760- 1 |
Safety of machinery. Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
|
DS DS/EN 1760- 2 |
Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
|
DS DS/EN 1760- 3 |
Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices |
|
DS DS/EN 1822- 1 |
High efficiency air filters (HEPA and ULPA) - Part 1: Classification, performance testing, marking |
|
DS DS/EN 1822- 2 |
High efficiency air filters (HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics |
|
DS DS/EN 1822- 3 |
High efficiency air filters (HEPA and ULPA) - Part 3: Testing flat sheet filter media |
|
DS DS/EN 1822- 4 |
High efficiency particulate air filters (HEPA and ULPA) - Part 4: Determining leakage of filter element (Scan method) |
|
DS DS/EN 1822- 5 |
High efficiency particulate air filters (HEPA and ULPA) - Part 5: Determining the efficiency of filter element |
|
DS DS/EN 1825- 1 |
Grease separators - Part 1: Principles of design, performance and testing, marking and quality control |
|
DS DS/EN 1825- 2 |
Grease separators - Part 2: Selection of nominal size, installation, operation and maintenance |
|
DS DS/EN 1827 |
Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking |
|
DS DS/EN 1834- 1 |
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres |
|
DS DS/EN 1834- 2 |
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust |
|
DS DS/EN 1834- 3 |
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres |
|
DS DS/EN 1836 |
Personal eye protection - Sunglasses, sunglare filters for general use and filters for direct observation of the sun |
|
DS DS/EN 1837 |
Safety of machinery - Integral lighting of machines |
|
DS DS/EN 1839 |
Determination of explosion limits of gases and vapours |
|
DS DS/EN 1846- 1 |
Firefighting and rescue service vehicles - Part 1: Nomenclature and designation |
|
DS DS/EN 1846- 2 |
Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance |
|
DS DS/EN 1846- 2/A1 |
Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance-(AMENDS DS/EN 1846-2) |
|
DS DS/EN 1846- 3 |
Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance |
|
DS DS/EN 1866 |
Mobile fire extinguishers |
|
DS DS/EN 1868 |
Personal protective equipment against falls from a height - List of equivalent terms |
|
DS DS/EN 1869 |
Fire blankets |
|
DS DS/EN 1891 |
Personal protective equipment for the prevention of falls from a height - Low stretch kernmantel ropes |
|
DS DS/EN 1899- 1 |
Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 1: Dilution and seeding method with allylthiourea addition |
|
DS DS/EN 1899- 2 |
Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 2: Method for undiluted samples |
|
DS DS/EN 1911- 1 |
Stationary source emissions - Manual method of determination of HCl - Part 1: Sampling of gases |
|
DS DS/EN 1911- 2 |
Stationary source emissions - Manual method of determination of HCl - Part 2: Gaseous compounds absorption |
|
DS DS/EN 1911- 3 |
Stationary source emissions - Manual method of determination of HCl - Part 3: Absorption solutions analysis and calculation |
|
DS DS/EN 1915- 3 |
Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction |
|
DS DS/EN 1938 |
Personal eye protection - Goggles for motorcycle and moped users |
|
DS DS/EN 1947 |
Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
|
DS DS/EN 1948- 1 |
Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs - Part 1: Sampling |
|
DS DS/EN 1948- 2 |
Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs - Part 2: Extraction and clean-up |
|
DS DS/EN 1948- 3 |
Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs - Part 3: Identification and quantification |
|
DS DS/EN 2 |
Classification of fires |
|
DS DS/EN 207 |
Personal eye-protection - Filters and eye-protectors against laser radiation (laser eye-protectors) |
|
DS DS/EN 207/A1 |
Personal eye-protection - Filters and eye-protectors against laser radiation (laser eye-protectors)-(AMENDS DS/EN 207) |
|
DS DS/EN 208 |
Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) |
|
DS DS/EN 208/A1 |
Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)-(AMENDS DS/EN 208) |
|
DS DS/EN 24869- 1 |
Acoustics - Hearing protectors - Part 1: Subjective method for the measurement of sound attenuation |
|
DS DS/EN 24869- 3 |
Acoustics - Hearing protectors - Part 3: Simplified method for the measurement of insertion loss of ear-muff type protectors for quality inspection purposes |
|
DS DS/EN 25663 |
Water quality - Determination of Kjeldahl nitrogen - Method after mineralization with selenium |
|
DS DS/EN 25667- 1 |
Water quality - Sampling - Part 1: Guidance on the design of sampling programmes |