|
DS DS 2048 |
Sampling procedures and charts for inspection by variables for percent nonconforming |
|
DS DS 2163 |
Statistics - Vocabulary and symbols |
|
DS DS 8001 |
Integrated management systems |
|
DS DS 980 |
Terminology on production planning and control |
|
DS DS 981 |
Terminology on work-studies |
|
DS DS/CEN ISO/TS 14907-1 |
Road transport and traffic telematics Electronic fee collection Test procedures for user and fixed equipment Part 1: Description of test procedures |
|
DS DS/CEN ISO/TS 17261 |
Intelligent transport systems Automatic vehicle and equipment identification Intermodal good transport architecture and terminology |
|
DS DS/CEN ISO/TS 17574 |
Road transport and traffic telematics Electronic Fee Collection (EFC) Guidelines for EFC security protection profiles |
|
DS DS/CEN/CR 13908 |
Logistics Performance Measures - Requirements and Measuring Methods |
|
DS DS/CEN/TR 14310 |
Freight transportation services - Declaration and reporting of environmental performance in freight transport chains |
|
DS DS/CEN/TR 14709 |
Postal services - Quality of Service - Guide for the implementation of EN 13850 |
|
DS DS/CEN/TS 14441 |
Postal services Mail aggregates Creation, processing and tracking |
|
DS DS/CEN/TS 14442 |
Postal services - Automated processing of mail items - Facing identification marks |
|
DS DS/CEN/TS 14482 |
Postal services - Trays for international letter mail - Test methods and performance requirements |
|
DS DS/CEN/TS 14567 |
Postal services - Automated processing of mail items - Address block locator |
|
DS DS/CEN/TS 14631 |
Postal services Automatic identification of receptacles and containers Receptacle asset numbering |
|
DS DS/CLC/R 009- 003 |
Railways applications - Guide to the specification of a guided transport system |
|
DS DS/CLC/TS 50349 |
Qualification of electrical installation contractors |
|
DS DS/CWA 14040 |
A Standardization Work Programme for "Learning and Training Technologies & Educational Multimedia Software" |
|
DS DS/CWA 14087 |
European Call Centre Standards for Training and Qualification - Customer Contact Representative Competences |
|
DS DS/CWA 45546- 1 |
Guidelines to standardisers of Collective Transport Systems - Needs of older people and persons with disabilities - Part 1: Basic Guidelines |
|
DS DS/EN 12507 |
Transportation services Guidance notes on the application of EN ISO 9001:2000 to the road transportation, storage, distribution and railway goods industries |
|
DS DS/EN 12522- 1 |
Furniture removal activities - Furniture removal for private individuals - Part 1: Service specification |
|
DS DS/EN 12522- 2 |
Furniture removal activities - Furniture removal for private individuals Part 2: Provision of service |
|
DS DS/EN 12973 |
Value management |
|
DS DS/EN 13011 |
Transportation Services - Goods transport chains - System for declaration of performance conditions |
|
DS DS/EN 1325- 1 |
Value management, value analysis, functional analysis vocabulary - Part 1: Value analysis and functional analysis |
|
DS DS/EN 1325- 2 |
Value Management, Value Analysis, Functional Analysis vocabulary - Part 2: Value Management |
|
DS DS/EN 13306 |
Maintenance terminology |
|
DS DS/EN 13549 |
Cleaning services - Basic requirements and recommendations for quality measuring systems |
|
DS DS/EN 13619 |
Postal services - Mail item processing - Optical characteristics for processing letters |
|
DS DS/EN 13724 |
Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods |
|
DS DS/EN 13809 |
Tourism services - Travel agencies and tour operators - Terminology |
|
DS DS/EN 13816 |
Transportation - Logistics and services - Public passenger transport - Service quality definition, targeting and measurement |
|
DS DS/EN 13850 |
Postal services - Quality of service - Measurement of the transit time of end-to-end services for single piece priority mail and first class mail |
|
DS DS/EN 14012 |
Postal services - Quality of service - Measurement of complaints and redress procedures |
|
DS DS/EN 14137 |
Postal services - Quality of service - Measurement of loss of registered mail and other types of postal service using a track and trace system |
|
DS DS/EN 14142- 1 |
Postal services - Address databases - Part 1: Components of postal addresses |
|
DS DS/EN 14153- 1 |
Recreational diving service - Safety related minimum requirements for the training of recreational scuba divers - Part 1: Level 1 - Supervised Diver |
|
DS DS/EN 14153- 2 |
Recreational diving services - Safety related minimum requirements for the training of recreational scuba divers - Part 2: Level 2 - Autonomous Diver |
|
DS DS/EN 14153- 3 |
Recreational diving services - Safety related minimum requirements for the training of recreational scuba divers - Part 3: Level 3 - Dive Leader |
|
DS DS/EN 14413- 1 |
Recreational Diving Services - Safety related minimum requirements for the training of scuba instructors - Part 1: Level 1 |
|
DS DS/EN 14413- 2 |
Recreational Diving Services - Safety related minimum requirements for the training of scuba instructors - Part 2: Level 2 |
|
DS DS/EN 14467 |
Recreational diving services - Requirements for recreational scuba diving service providers |
|
DS DS/EN 14508 |
Postal services - Quality of service - Measurement of the transit time of end-to-end services for single piece non-priority and second class mail |
|
DS DS/EN 14534 |
Postal services - Quality of service - Measurement of the transit time of end-to-end services for bulk mail |
|
DS DS/EN 14804 |
Language study tour providers Requirements |
|
DS DS/EN 14873- 1 |
Furniture removal activities Storage of furniture and personal effects for private individuals Part 1: Specification for the storage facility and related storage provision |
|
DS DS/EN 14873- 2 |
Furniture removal activities Storage of furniture and personal effects for private individuals Part 2: Provision of the service |
|
DS DS/EN 29004- 2 |
Quality management and quality system elements - Part 2: Guidelines for services |
|
DS DS/EN 45003 |
Calibration and testing laboratory accreditation systems - General requirements for operation and recognition |
|
DS DS/EN 45010 |
General requirements for assessment and accreditation of certification/registration bodies |
|
DS DS/EN 45011 |
General requirements for bodies operating product certification systems |
|
DS DS/EN 45012 |
General requirements for bodies operating assessment and certification/ registration of quality systems |
|
DS DS/EN 45503 |
Attestation Standard for the assessment of contract award procedures of entities operating in the water, energy, transport and telecommunication sectors |
|
DS DS/EN 46001 |
Quality systems - Medical devices - Particular requirements for the application of DS/EN ISO 9001 |
|
DS DS/EN 46002 |
Quality systems - Medical devices - Particular requirements for the application of EN ISO 9002 |
|
DS DS/EN 46003 |
Quality systems - Medical devices - Particular requirements for the application of EN ISO 9003 |
|
DS DS/EN 50103 |
Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for the active (including active implantable) medical device industry |
|
DS DS/EN 60300- 1 |
Dependability management - Part 1: Dependability management systems |
|
DS DS/EN 60300- 2 |
Dependability management - Part 2: Guidance for dependability management |
|
DS DS/EN 60300- 2 |
Dependability management - Part 2: Dependability programme elements and tasks |
|
DS DS/EN 60300-3- 1 |
Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology |
|
DS DS/EN 60300-3- 12 |
Dependability management - Part 3-12: Application guide - Integrated logistic support |
|
DS DS/EN 60300-3- 2 |
Dependability management Part 3-2: Application guide Collection of dependability data from the field |
|
DS DS/EN 60300-3- 3 |
Dependability management Part 3-3: Life cycle costing analysis Application guide |
|
DS DS/EN 724 |
Guidance on the application of EN 29001 and 46001 and of EN 29002 and EN 46002 for non-active medical devices |
|
DS DS/EN ISO 10012 |
Measurement management systems - Requirements for measurement processes and measuring equipment |
|
DS DS/EN ISO 13485 |
Quality systems - Medical devices - Particular requirements for the application of EN ISO 9001 |
|
DS DS/EN ISO 13485 |
Medical devices - Quality management systems - Requirements for regulatory purposes |
|
DS DS/EN ISO 13488 |
Quality systems - Medical devices - Particular requirements for the application of EN ISO 9002 |
|
DS DS/EN ISO 14825 |
Intelligent transport systems - Geographic Data Files (GDF) - Overall data specification |
|
DS DS/EN ISO 14906 |
Road transport and traffic telematics - Electronic fee collection - Application interface definition for dedicated short-range communication |
|
DS DS/EN ISO 15189 |
Medical laboratories - Particular requirements for quality and competence |
|
DS DS/EN ISO 18513 |
Tourism Services - Hotels and other types of tourism accommodation - Terminology |
|
DS DS/EN ISO 19011 |
Guidelines for quality and/or environmental management systems auditing |
|
DS DS/EN ISO 9000 |
Quality management systems - Fundamentals and vocabulary |
|
DS DS/EN ISO 9000- 1 |
Quality management and quality assurance standards - Part 1: Guidelines for selection and use |
|
DS DS/EN ISO 9001 |
Quality management systems - Requirements |
|
DS DS/EN ISO/IEC 17011 |
Conformity assessment - General requirements for accreditation bodies accrediting conformity assessment bodies |
|
DS DS/EN ISO/IEC 17020 |
General criteria for the operation of various types of bodies performing inspection |
|
DS DS/EN ISO/IEC 17024 |
Conformity assessment - General requirements for bodies operating certification of persons |
|
DS DS/EN ISO/IEC 17025 |
General requirements for the competence of testing and calibration laboratories |
|
DS DS/EN ISO/IEC 17050-1 |
Conformity assessment - Suppliers declaration of conformity - Part 1: General requirements |
|
DS DS/EN ISO/IEC 17050-2 |
Conformity assessment - Suppliers declaration of conformity - Part 2: Supporting documentation |
|
DS DS/ENV 13269 |
Maintenance - Guideline on preparation of maintenance contracts |
|
DS DS/ENV 13712 |
Postal services - Forms - Harmonised vocabulary |
|
DS DS/ENV 13998 |
Road transport and traffic telematics - Public transport - Non- interactive dynamic passenger information on ground |
|
DS DS/ENV 14014 |
Postal services - Hybrid mail - Document type definitions for customers to operator: a common set of default tags |
|
DS DS/ENV ISO 14904 |
Road transport and traffic telematics - Electronic fee collection (EFC) - Interface specification for clearing between operators |
|
DS DS/ENV ISO 14907- 1 |
Road Transport and Traffic Telematics (RTTT) - Electronic Fee Collection (EFC) - Test procedures for user and fixed equipment - Part 1: Description of test procedures |
|
DS DS/ES 59004 |
Qualification of electrical installation contractors |
|
DS DS/INF 112 |
Instructions for use of products of consumer interest |
|
DS DS/INF 117 |
CENELEC Guide No. 16 on the implementation of New Approach directives and the Low Voltage directive with respect to the EC declaration of conformity |
|
DS DS/INF 128 |
Complaints management systems - Guide to design and implementation |
|
DS DS/INF 134 |
ISO 9000 Guide and interpretation |
|
DS DS/INF 137 |
Value-adding quality management systems with ISO 9001:2000 |
|
DS DS/INF 149 |
Guide to DS/INSTA 800 |
|
DS DS/INF 153 |
Good service practice for operation and maintenance of green areas |
|
DS DS/INF 157 |
Good practice for maintenance of property - Part 1: Management |
|
DS DS/INF 1900 |
Quality Management and development of care services for elderly people Requirements for the management system |
|
DS DS/INF 2000 |
Guidelines for certification of electronic web sites - Requirements for design and maintenance |
|
DS DS/INF 22/39 |
General requirements for the acceptance of inspection bodies |
|
DS DS/INF 22/46 |
Comparative testing of consumer products and related services - General principles |
|
DS DS/INF 22/7 |
ISO/IEC Guide - Part 7: Requirements for standards suitable for product certification |
|
DS DS/INF 22- 43 |
Development and operation of laboratory proficiency testing |
|
DS DS/INF 66 |
SPC - Control charts and process capability |
|
DS DS/INSTA 800 |
Cleaning quality - Measuring system for assessment of cleaning quality. |
|
DS DS/INSTA 800 E |
Cleaning quality - Measuring system for assessing the quality of cleaning services |
|
DS DS/ISO 10002 |
Quality management - Customer satisfaction - Guidelines for complaints handling in organizations |
|
DS DS/ISO 10005 |
Quality management system - Guidelines for quality plans |
|
DS DS/ISO 10006 |
Quality management systems - Guidelines for quality management in projects |
|
DS DS/ISO 10007 |
Quality management systems - Guidelines for configuration management |
|
DS DS/ISO 10015 |
Quality Management - Guidelines for training |
|
DS DS/ISO 10019 |
Guidelines for the selection of quality management system consultants and use of their services |
|
DS DS/ISO 10576- 1 |
Statistical methods - Guidelines for the evaluation of confomity with specified requirements - Part 1: General principles |
|
DS DS/ISO 10725 |
Acceptance sampling plans and procedures for the inspection of bulk materials. |
|
DS DS/ISO 10962 |
Securities and related financial instruments - Classification of Financial Instruments (CFI code) |
|
DS DS/ISO 11453+COR.1 |
Statistical interpretation of data - Tests and confidence intervals relating to proportions |
|
DS DS/ISO 11462- 1 |
Guidelines for implementation of statistical process control (SPC) - Part 1: Elements of SPC |
|
DS DS/ISO 11648- 1 |
Statistical aspects of sampling from bulk materials - Part 1: General principles |
|
DS DS/ISO 11648- 2 |
Statistical aspects of sampling from bulk materials - Part 2: Sampling of particulate materials |
|
DS DS/ISO 11843- 1 |
Capability of detection - Part 1: Terms and definitions |
|
DS DS/ISO 11843- 1/CORR.1 |
Capability of detection - Part 1: Terms and definitions |
|
DS DS/ISO 11843- 2 |
Capability of detection - Part 2: Methodology in the linear calibration case |
|
DS DS/ISO 11843- 3 |
Capability of detection - Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used |
|
DS DS/ISO 11843- 4 |
Capability of detection - Part 4: Methodology for comparing the minimum detectable value with a given value |
|
DS DS/ISO 13448- 1 |
Acceptance sampling procedures based on the allocation of priorities principal (APP) Part 1: Guidelines for the APP approach |
|
DS DS/ISO 13448- 2 |
Acceptance sampling procedures based on the allocation of priorities principle (APP) Part 2: Coordinated single sampling plans for acceptance sampling by attributes |
|
DS DS/ISO 13528 |
Statistical methods for use in proficiency testing by interlaboratory comparisons |
|
DS DS/ISO 13616 |
Banking and related financial services - International Bank Account Number (IBAN) |
|
DS DS/ISO 14560 |
Acceptance sampling procedures by attributes - Specified quality levels in nonconforming items per million |
|
DS DS/ISO 14969 |
Quality systems - Medical devices - Guidance on the application of ISO 13485 and ISO 13488 |
|
DS DS/ISO 15161 |
Guidance on the application of ISO 9001:2000 in the food and drink industry |
|
DS DS/ISO 16269- 7 |
Statistical interpretation of data - Part 7: Median - Estimation and confidence intervals |
|
DS DS/ISO 16269- 8 |
Statistical interpretation of data Part 8: Determination of a prediction interval |
|
DS DS/ISO 21247 |
Combined accept-zero sampling systems and process control procedures for product acceptance |
|
DS DS/ISO 2602 |
Statistical interpretation of test results - Estimation of the mean - Confidence interval |
|
DS DS/ISO 2859- 1+COR.1 |
Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptable quality limit (AQL) for lot-by-lot inspection |
|
DS DS/ISO 2859- 2 |
Sampling procedures for inspection by attributes - Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection |
|
DS DS/ISO 2859- 3 |
Sampling procedures for inspection by attributes - Part 3: Skip-lot sampling procedures |
|
DS DS/ISO 2859- 4 |
Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of declared quality levels |
|
DS DS/ISO 3534- 3 |
Statistics - Vocabulary and symbols - Part 3: Design of experiments |
|
DS DS/ISO 4217 |
Codes for the representation of currencies and funds |
|
DS DS/ISO 5479 |
Statistical interpretation of data - Tests for departure from the normal distribution |
|
DS DS/ISO 5725- 1 |
Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions |
|
DS DS/ISO 5725- 1/COR.1 |
Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions |
|
DS DS/ISO 5725- 2 |
Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
|
DS DS/ISO 5725- 2/CORR.1 |
Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
|
DS DS/ISO 5725- 3 |
Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method |
|
DS DS/ISO 5725- 3/CORR.1 |
Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method |
|
DS DS/ISO 5725- 4 |
Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for estimating the trueness of a standard measurement method |
|
DS DS/ISO 5725- 5 |
Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method-Corrigendum: 09/28/2005 |
|
DS DS/ISO 5725- 6 |
Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values |
|
DS DS/ISO 7982- 1+CORR. |
Bank telecommunication - Funds transfer messages - Part 1: Vocabulary and universal set of data segments and data elements for electronic funds transfer messages |
|
DS DS/ISO 8422 |
Sequential sampling plans for inspection by attributes |
|
DS DS/ISO 8422/COR.1 |
Sequential sampling plans for inspection by attributes - Technical Corrigendum 1 |
|
DS DS/ISO 8423 |
Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) |
|
DS DS/ISO 8423/COR.1 |
Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) - Technical Corrigendum 1 |
|
DS DS/ISO 9000- 2 |
Quality management and quality assurance standards - Part 2: Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003 |
|
DS DS/ISO 9004- 2 |
Quality management and quality system elements - Part 2: Guidelines for services |
|
DS DS/ISO 9004- 3 |
Quality management and quality system elements - Part 3: Guidelines for processed materials |
|
DS DS/ISO 9004- 4 |
Quality management and quality system elements - Part 4: Guidelines for quality improvement |
|
DS DS/ISO 9004- 4/COR.1 |
Quality management and quality system elements - Part 4: Guidelines for quality improvement |
|
DS DS/ISO/IEC 17030 |
Conformity assessment - General requirements for third-party marks of conformity |
|
DS DS/ISO/IEC 90003 |
Software engineering - Guidelines for the application of ISO 9001:2000 to computer software |
|
DS DS/ISO/IEC GUIDE 60 |
Conformity assessment - Code of good practice |
|
DS DS/ISO/IEC GUIDE 67 |
Conformity assessment - Fundamentals of product certification |
|
DS DS/ISO/IEC GUIDE 68 |
Arrangements for the recognition and acceptance of conformity assessment results |
|
DS DS/ISO/PAS 17002 |
Conformity assessment - Confidentiality - Principles and requirements |
|
DS DS/ISO/PAS 17003 |
Conformity assessment - Complaints and appeals - Principles and requirements |
|
DS DS/ISO/TR 10013 |
Guidelines for quality management system documentation |
|
DS DS/ISO/TR 10014 |
Guidelines for managing the economics of quality |
|
DS DS/ISO/TR 10017 |
Guidance on statistical techniques for ISO 9001:2000 |
|
DS DS/ISO/TR 13425 |
Guidelines for the selection of statistical methods in standardization and specification |
|
DS DS/ISO/TR 22971 |
Accuracy (trueness and precision) of measurement methods and results Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results |
|
DS DS/ISO/TR 8550 |
Guide for the selection of an acceptance sampling system, scheme or plan for inspection of discrete items in lots |