|
DS DS 1005 |
Wooden windows - Terminology and denominations of dimensions |
|
DS DS 1010.1 |
Modular co-ordination in building - Vocabulary |
|
DS DS 102 |
Technical drawings - Folding of drawings to size A4 |
|
DS DS 1021 |
Users manual regarding service components and equipments in building |
|
DS DS 103 |
Technical drawings - Folding of drawings to size A4 for binding |
|
DS DS 106.2 |
Technical drawing - Graphical symbols for piping, etc. for power plants |
|
DS DS 106.3 |
Fluid power systems and components - Graphic symbols |
|
DS DS 1107 |
Stairs - Vocabulary |
|
DS DS 1124 |
Tolerances in building - Terminology |
|
DS DS 1126.1 |
Joints in building - Terminology |
|
DS DS 147 |
Periodicals - Bibliographical strip |
|
DS DS 148 |
Periodicals - Presentation of periodicals |
|
DS DS 198.0 |
Symbols on maps 1:100 - 1:10 000 - Part 0: Introduction and general rules |
|
DS DS 198.1 |
Symbols on maps 1:100-1:10 000 - Part 1: Index |
|
DS DS 198.2 |
Symbols on maps 1:100-1:10 000 - Part 2: Topographical maps |
|
DS DS 198.3 |
Symbols on maps 1:100-1:10 000 - Transportation systems |
|
DS DS 198.4 |
Symbols on maps 1:100-1:10 000 - Part 4: Supply systems |
|
DS DS 2040 |
Greenhouses - Vocabulary |
|
DS DS 2049 |
Data processing - Vocabulary |
|
DS DS 2090 |
Flowchart symbols for information processing |
|
DS DS 2095.1 |
Building and civil engineering drawings - Drawings for construction of reinforced concrete |
|
DS DS 2111.1 |
Building and civil engineering drawings - Survey |
|
DS DS 2111.12 |
Building and civil engineering drawings - Guidelines for representation |
|
DS DS 2111.13 |
Building and civil engineering drawings - Revision |
|
DS DS 2111.14 |
Building and civil engineering drawings - Drawing schedule |
|
DS DS 2111.4 |
Building and civil engineering drawings - Lettering |
|
DS DS 2111.5 |
Building and civil engineering drawings - Dimensioning - General rules |
|
DS DS 2111.6 |
Building and civil engineering drawings - Dimensioning - Methods |
|
DS DS 2111.7 |
Building and civil engineering drawings - Projection methods - Orthographic projection |
|
DS DS 2111.8 |
Building and civil engineering drawings - Representation of views and sections |
|
DS DS 2111.9 |
Building and civil engineering drawings - Representation of areas on views and sections |
|
DS DS 2142.9 |
Powered industrial trucks - Safety code - Control symbols |
|
DS DS 2163 |
Statistics - Vocabulary and symbols |
|
DS DS 2164 |
Directories of libraries, information and documentation centres |
|
DS DS 2188 |
Acoustics - Vocabulary |
|
DS DS 2195 |
Documentation - Microfiche headers - Application and contents |
|
DS DS 2196 |
Documentation - Bibliographical references |
|
DS DS 23.3 |
Technical drawings - Standard lettering III |
|
DS DS 2301- 1 |
Graphic symbols - Pictograms for information of the public - Part 1: Prohibitions, instructions, etc. |
|
DS DS 2301- 2 |
Public information symbols - Part 2: Measures of precaution against robbery, burglary, theft and vandalism |
|
DS DS 2302.1 |
Graphic symbols - Symbols for home appliances |
|
DS DS 2336 |
Solar heating - Vocabulary |
|
DS DS 2339 |
Classification of requirements on manufacturing documents |
|
DS DS 2343 |
Solid mineral fuels - Vocabulary |
|
DS DS 2344 |
International vocabulary of basic and general terms in metrology |
|
DS DS 2357- 1 |
Graphical symbols for dimensional metrology |
|
DS DS 2382 |
Fusion of plastics. Symbols |
|
DS DS 2392 |
Shipbuilding. Symbols for structural fireprotection |
|
DS DS 2394- 1 |
Lexical data collections - Description of data categories and data structure - Part 1: Taxonomy for the classification of information types |
|
DS DS 349 |
Door locks - Nomenclature |
|
DS DS 377 |
Alphabetical arrangements |
|
DS DS 378 |
Transliteration of Cyrillic characters |
|
DS DS 378.1 |
Transliteration of the modern Russian alphabet |
|
DS DS 378.1A |
Examples of transliteration of Russian names |
|
DS DS 379 |
Sizes of columns and illustrations in periodicals, etc., in format A4 and A5 |
|
DS DS 4000 |
Graphic symbols for environmental management and internal environmental communication |
|
DS DS 404 |
Dansk Standard´s Nomenclature for Sand -, Gravel - and Stone Materials |
|
DS DS 5004.351 |
International Electrotechnical Vocabulary - Chapter 351 - Automatic control |
|
DS DS 5004.446 |
International Electrotechnical Vocabulary - Group 446 - Electrical relays |
|
DS DS 5004.691 |
International Electrotechnical Vocabulary - Chapter 691 - Tariffs for electricity |
|
DS DS 5004.806 |
International Electrotechnical Vocabulary - Group 806 - Recording and reproduction of sound and video |
|
DS DS 56 |
Technical drawings - Representation of screws and nuts |
|
DS DS 6041 |
Agriculture - Pig houses - Vocabulary |
|
DS DS 704 |
Lighting - Definitions |
|
DS DS 734.1 |
Safety signs - Principles, dimensions and distances of observation |
|
DS DS 734.2 |
Safety signs - Prohibition, warning, mandatory, emergency and fire fighting signs |
|
DS DS 735 |
Colours for identification purposes |
|
DS DS 737 |
Letter types for signboards, posters, etc. |
|
DS DS 912.1 |
Paper forms - Basic spacings and network. |
|
DS DS 912.1- D |
Appendix D to 912.1 |
|
DS DS 912.2 |
Paper forms - Basic details |
|
DS DS 980 |
Terminology on production planning and control |
|
DS DS 981 |
Terminology on work-studies |
|
DS DS/CEN ISO/TR 11610 |
Protective clothing - Vocabulary |
|
DS DS/CEN/CR 14400 |
European ordering rules - Ordering for Latin, Greek, Cyrillic, Georgian and Armenian scripts |
|
DS DS/CEN/CR 1830 |
CIM Systems Architecture - Vocabulary |
|
DS DS/CEN/TR 14599 |
Terms and definitions for welding purposes in relation with EN 1792 |
|
DS DS/CEN/TR 14699 |
Office furniture - Terminology |
|
DS DS/CEN/TS 14588 |
Solid biofuels - Terminology, definitions and descriptions |
|
DS DS/CLC/R 210- 001 |
Guide on EMC standardization for product committees |
|
DS DS/CWA 45546- 1 |
Guidelines to standardisers of Collective Transport Systems - Needs of older people and persons with disabilities - Part 1: Basic Guidelines |
|
DS DS/EN 10001 |
Definition and classification of pig-irons |
|
DS DS/EN 1001- 1 |
Durability of wood and wood-based products Terminology List of equivalent terms |
|
DS DS/EN 1001- 2 |
Durability of wood and wood based products Terminology Part 2: Vocabulary |
|
DS DS/EN 1005- 1 |
Safety of machinery - Human physical performance - Part 1: Terms and definitions |
|
DS DS/EN 10052 |
Vocabulary of heat treatment terms for ferrous products |
|
DS DS/EN 1070 |
Safety of machinery - Terminology |
|
DS DS/EN 1083- 1 |
Power-driven brushes - Part 1: Definitions and nomenclature |
|
DS DS/EN 1085 |
Wastewater treatment - Vocabulary |
|
DS DS/EN 1089- 3 |
Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3: Colour coding |
|
DS DS/EN 1094- 1 |
Insulating refractory products - Part 1: Terminology for ceramic fibre products |
|
DS DS/EN 12216 |
Shutters, external blinds, internal blinds - Terminology, glossary and definitions |
|
DS DS/EN 12258- 1 |
Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms |
|
DS DS/EN 12258- 3 |
Aluminium and aluminium alloys - Terms and definitions - Part 3: Scrap |
|
DS DS/EN 12258- 4 |
Aluminium and aluminium alloys Terms and definitions Part 4: Residues of the aluminium industry |
|
DS DS/EN 12302 |
Crude tar and crude benzole - Terminology |
|
DS DS/EN 12303 |
Coal tar based oils - Terminology |
|
DS DS/EN 12374 |
Packaging - Flexible tubes - Terminology |
|
DS DS/EN 12433- 1 |
Industrial, commercial and garage doors and gates - Terminology - Part 1: Types of doors |
|
DS DS/EN 12433- 2 |
Industrial, commercial and garage doors and gates - Terminology - Part 2: Parts of doors |
|
DS DS/EN 12466 |
Resilient floor coverings - Vocabulary |
|
DS DS/EN 12481 |
Self adhesive tapes - Terminology |
|
DS DS/EN 12508 |
Corrosion protection of metals and alloys - Surface treatment, metallic and other inorganic coatings - Vocabulary |
|
DS DS/EN 12519 |
Windows and pedestrian doors - Terminology |
|
DS DS/EN 12526 |
Castors and wheels - Vocabulary, recommended symbols and multilingual dictionary |
|
DS DS/EN 12584 |
Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology |
|
DS DS/EN 12597 |
Bitumen and bituminous binders - Terminology |
|
DS DS/EN 12665 |
Light and lighting - Basic terms and criteria for specifying lighting requirements |
|
DS DS/EN 12670 |
Natural stone - Terminology |
|
DS DS/EN 12674- 1 |
Roll containers - Part 1: Terminology |
|
DS DS/EN 12723 |
Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units |
|
DS DS/EN 12775 |
Solid wood panels - Classification and terminology |
|
DS DS/EN 12786 |
Safety of machinery - Guidance for the drafting of the vibration clauses of safety standards |
|
DS DS/EN 12792 |
Ventilation for buildings - Symbols, terminology and graphical symbols |
|
DS DS/EN 12832 |
Characterisation of sludges - Utilisation and disposal of sludges - Vocabulary |
|
DS DS/EN 12901 |
Products used for treatment of water intended for human consumption - Inorganic supporting and filtering materials - Definitions |
|
DS DS/EN 12944- 1 |
Fertilizers and liming materials and soil improvers - Vocabulary - Part 1: General terms |
|
DS DS/EN 12944- 1/AC |
Fertilizers and liming materials and soil improvers - Vocabulary - Part 1: General terms |
|
DS DS/EN 12944- 2 |
Fertilizers and liming materials and soil improvers - Vocabulary - Part 2: Terms relating to fertilizers |
|
DS DS/EN 12944- 2/AC |
Fertilizers and liming materials and soil improvers - Vocabulary - Part 2: Terms relating to fertilizers |
|
DS DS/EN 12944- 3 |
Fertilizers and liming materials - Vocabulary - Part 3: Terms relating to liming materials |
|
DS DS/EN 131- 1 |
Ladders - Terms, types, functional sizes |
|
DS DS/EN 1317- 1 |
Road restraint systems - Part 1: Terminology and general criteria for test methods |
|
DS DS/EN 13193 |
Packaging - Packaging and the environment - Terminology |
|
DS DS/EN 1322+A1 |
Adhesives for tiles - Definitions and terminology |
|
DS DS/EN 13232- 1 |
Railway applications - Track - Switches and crossings - Part 1: Definitions |
|
DS DS/EN 13237 |
Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
|
DS DS/EN 1325- 1 |
Value management, value analysis, functional analysis vocabulary - Part 1: Value analysis and functional analysis |
|
DS DS/EN 1325- 2 |
Value Management, Value Analysis, Functional Analysis vocabulary - Part 2: Value Management |
|
DS DS/EN 1330- 1 |
Nondestructive testing - Terminology - Part 1: List of general terms |
|
DS DS/EN 1330- 10 |
Non-destructive testing - Terminology - Part 10: Terms used in visual testing |
|
DS DS/EN 1330- 2 |
Non-destructive testing - Terminology - Part 2: Terms common to the non-destructive testing methods |
|
DS DS/EN 1330- 3 |
Non-destructive testing - Terminology - Part 3: Terms used in industrial radiographic testing |
|
DS DS/EN 1330- 4 |
Non destructive testing - Terminology - Part 4: Terms used in ultrasonic testing |
|
DS DS/EN 1330- 5 |
Non-destructive testing - Terminology - Part 5: Terms used in Eddy Current testing |
|
DS DS/EN 13306 |
Maintenance terminology |
|
DS DS/EN 1330- 8 |
Non-destructive testing - Terminology - Part 8: Terms used in leak tightness testing |
|
DS DS/EN 1330- 9 |
Non-destructive testing - Terminology - Part 9: Terms used in acoustic emission testing |
|
DS DS/EN 13318 |
Screed material and floor screeds - Definitions |
|
DS DS/EN 13360 |
Rubber- or plastics-coated fabrics - Terminology |
|
DS DS/EN 134 |
Respiratory protective devices - Nomenclature of components |
|
DS DS/EN 13447 |
Electrically propelled road vehicles - Terminology |
|
DS DS/EN 13460 |
Maintenance - Documents for maintenance |
|
DS DS/EN 135 |
Respiratory protective devices - List of equivalent terms |
|
DS DS/EN 13551 |
Inland navigation vessels - Vocabulary |
|
DS DS/EN 13622 |
Gas welding equipment - Terminology - Terms used for gas welding equipment |
|
DS DS/EN 13701 |
Space systems - Glossary of terms |
|
DS DS/EN 13756 |
Wood floor - Terminology |
|
DS DS/EN 13792 |
Colour coding of taps and valves for use in laboratories |
|
DS DS/EN 13809 |
Tourism services - Travel agencies and tour operators - Terminology |
|
DS DS/EN 13857- 1 |
Explosives for civil uses - Part 1: Terminology |
|
DS DS/EN 13878 |
Leisure accomodation vehicles - Terms and definitions |
|
DS DS/EN 13965- 1 |
Characterization of waste - Terminology - Part 1: Material related terms and definitions |
|
DS DS/EN 13965- 2 |
Characterization of waste - Terminology - Part 2: Management related terms and definitions |
|
DS DS/EN 14035- 1 |
Fireworks - Part 1: Terminology |
|
DS DS/EN 14057 |
Lead and lead alloys - Scraps - Terms and definitions |
|
DS DS/EN 14067- 1 |
Railway applications - Aerodynamics - Part 1: Symbols and units |
|
DS DS/EN 14076 |
Timber stairs - Terminology |
|
DS DS/EN 14175- 1 |
Fume cupboards - Part 1: Vocabulary |
|
DS DS/EN 14182 |
Packaging - Terminology - Basic terms and definitions |
|
DS DS/EN 14478 |
Railway applications Braking Generic vocabulary |
|
DS DS/EN 14511- 1 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 1: Terms and definitions |
|
DS DS/EN 14564 |
Tanks for transport of dangerous goods - Terminology |
|
DS DS/EN 14610 |
Welding and allied processes - Definitions of metal welding processes |
|
DS DS/EN 14665 |
Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings |
|
DS DS/EN 14916 |
Domestic cookware Graphical symbols (pictograms) |
|
DS DS/EN 15016- 1 |
Technical drawings - Railway applications - Part 1: General principles |
|
DS DS/EN 15016- 2 |
Technical drawings - Railway applications - Part 2: Parts lists |
|
DS DS/EN 15016- 3 |
Technical drawings - Railway applications - Part 3: Handling of modifications of technical documents |
|
DS DS/EN 1540 |
Workplace atmospheres - Terminology |
|
DS DS/EN 1556 |
Bar coding - Terminology |
|
DS DS/EN 165 |
Personal eye-protection - Vocabulary |
|
DS DS/EN 1659 |
In vitro diagnostic systems - Culture media for microbiology - Terms and definitions |
|
DS DS/EN 1792 |
Welding - Multilingual list of terms for welding and related processes |
|
DS DS/EN 1846- 1 |
Firefighting and rescue service vehicles - Part 1: Nomenclature and designation |
|
DS DS/EN 1861 |
Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols |
|
DS DS/EN 1868 |
Personal protective equipment against falls from a height - List of equivalent terms |
|
DS DS/EN 1885 |
Feather and down - Terms and definitions |
|
DS DS/EN 1885/A1 |
Feather and down - Terms and definitions-(AMENDS DS/EN 1885) |
|
DS DS/EN 19952 |
Footwear Vocabulary |
|
DS DS/EN 21942- 1 |
Dental vocabulary - Part 1: General and clinical terms |
|
DS DS/EN 21942- 3 |
Dental vocabulary - Part 3: Dental instruments |
|
DS DS/EN 21942- 4 |
Dental vocabulary - Part 4: Dental equipment |
|
DS DS/EN 22553 |
Welded, brazed and soldered joints - Symbolic representation on drawings |
|
DS DS/EN 23758 |
Textiles - Care labelling code using symbols |
|
DS DS/EN 247 |
Heat exchangers - Terminology |
|
DS DS/EN 27286 |
Graphical symbols for resistance welding equipment |
|
DS DS/EN 29092 |
Textiles - Nonwovens - Definition |
|
DS DS/EN 313- 2 |
Plywood - Classification and terminology - Part 2: Terminology |
|
DS DS/EN 40- 1 |
Lighting columns - Part 1: Definitions and terms |
|
DS DS/EN 414 |
Safety of machinery - Rules for the drafting and presentation of safety standards |
|
DS DS/EN 415- 1 |
Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment |
|
DS DS/EN 45020 |
Standardization and related activities - General vocabulary |
|
DS DS/EN 472 |
Pressure gauges - Vocabulary |
|
DS DS/EN 50419+CORR. |
Marking of electrical and electronic equipment in accordance with Article 11(2) of Directive 2002/96/EC (WEEE) |
|
DS DS/EN 60068-5- 2 |
Environmental testing - Part 5: Guide to drafting of test methods - Terms and definitions |
|
DS DS/EN 60073 |
Basic and safety principles for man-machine interface, marking and identication - Coding principles for indicators and actuators |
|
DS DS/EN 60073 |
Basic and safety principles for man-machines interface, marking and identification - Coning principles for indication devices and actuators |
|
DS DS/EN 60139 |
Preparation of outline drawings for cathode-ray tubes, their components, connections and gauges |
|
DS DS/EN 60276 |
Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings |
|
DS DS/EN 60387 |
Symbols for alternating-current electricity meters |
|
DS DS/EN 60417- 1 |
Graphical symbols for use on equipment - Part 1: Overview and application |
|
DS DS/EN 60417- 2 |
Graphical symbols for use on equipment - Part 2: Symbol originals |
|
DS DS/EN 60417- 2/A1 |
Graphical symbols for use on equipment - Part 2: Symbol originals- (AMENDS DS/EN 60417-2) |
|
DS DS/EN 60446 |
Basic and safety principles for man-machine interface, marking and identification - Identification of conductors by colours or numerals |
|
DS DS/EN 60617- 10 |
Graphical symbols for diagrams - Part 10: Telecommunications: Transmission |
|
DS DS/EN 60617- 11 |
Graphical symbols for diagrams - Part 11: Architectural and topographical installation plans and diagrams |
|
DS DS/EN 60617- 12 |
Graphical symbols for diagrams - Part 12: Binary logic elements |
|
DS DS/EN 60617- 13 |
Graphical symbols for diagrams - Part 13: Analogue elements |
|
DS DS/EN 60617- 2 |
Graphical symbols for diagrams - Part 2: Symbol elements, qualifying symbols and other symbols having general application |
|
DS DS/EN 60617- 3 |
Graphical symbols for diagrams - Part 3: Conductors and connecting devices |
|
DS DS/EN 60617- 4 |
Graphical symbols for diagrams - Part 4: Basic passive components |
|
DS DS/EN 60617- 5 |
Graphical symbols for diagrams - Part 5: Semiconductors and electron tubes |
|
DS DS/EN 60617- 6 |
Graphical symbols for diagrams - Part 6: Production and conversion of electrical energy |
|
DS DS/EN 60617- 7 |
Graphical symbols for diagrams - Part 7: Switchgear, controlgear and protective devices |
|
DS DS/EN 60617- 8 |
Graphical symbols for diagrams - Part 8: Measuring instruments, lamps and signalling devices |
|
DS DS/EN 60617- 9 |
Graphical symbols for diagrams - Part 9: Telecommunications: Switching and peripheral equipment |
|
DS DS/EN 60633 |
Terminology for high-voltage direct current (HVDC) transmission |
|
DS DS/EN 60743 |
Live working - Terminology for tools, equipment and devices |
|
DS DS/EN 61082- 1 |
Preparation of documents used in electrotechnology - Part 1: General requirements |
|
DS DS/EN 61082- 1/A1 |
Preparation of documents used in electrotechnology. Part 1: General requirements-(AMENDS DS/EN 61082-1) |
|
DS DS/EN 61082- 1/A2 |
Preparation of documents used in electrotechnology - Part 1: General requirements-(AMENDS DS/EN 61082-1) |
|
DS DS/EN 61082- 2 |
Preparation of documents used in electrotechnology - Part 2: Function- oriented diagrams |
|
DS DS/EN 61082- 3 |
Preparation of documents used in electrotechnology - Part 3: Connection diagrams, tables and lists |
|
DS DS/EN 61082- 4 |
Preparation of documents used in electrotechnology - Part 4: Location and installation documents |
|
DS DS/EN 61120- 4 |
Digital audio tape recorder reel-to-reel system, using 6.3 mm magnetic tape, for professional use - Part 4: Magnetic tape properties: definitions and methods of measurement |
|
DS DS/EN 61346- 1 |
Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 1: Basic rules |
|
DS DS/EN 61346- 2 |
Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 2: Classification of objects and codes for classes |
|
DS DS/EN 61355 |
Classification and designation of documents for plants, systems and equipment |
|
DS DS/EN 614- 1 |
Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
|
DS DS/EN 61429 |
Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 |
|
DS DS/EN 61429/A11 |
Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 and indications regarding directives 93/86/EEC and 91/157/EEC-(AMENDS DS/EN 61429) |
|
DS DS/EN 61429/COR. |
Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 |
|
DS DS/EN 61666 |
Industrial systems, installations and equipment and industrial products - Identification of terminals within a system |
|
DS DS/EN 62023 |
Structuring of technical information and documentation |
|
DS DS/EN 62079 |
Preparation of instructions - Structuring, content and presentation |
|
DS DS/EN 633 |
Cement-bonded particleboards - Definition and classification |
|
DS DS/EN 657 |
Thermal spraying - Terminology, classification |
|
DS DS/EN 71- 6 |
Safety of toys - Part 6: Graphical symbol for age warning labelling |
|
DS DS/EN 736- 1 |
Valves - Terminology - Part 1: Definition of types of valves |
|
DS DS/EN 736- 2 |
Valves - Terminology - Part 2: Definition of components of valves |
|
DS DS/EN 736- 3 |
Valves - Terminology - Part 3: Definition of terms |
|
DS DS/EN 736- 3/A1 |
Valves - Terminology - Part 3: Definition of terms-(AMENDS DS/EN 736-3) |
|
DS DS/EN 764- 1 |
Pressure equipment - Terminology - Part 1: Pressure, temperature, volume, nominal size |
|
DS DS/EN 764- 2 |
Pressure equipment - Part 2: Quantities, symbols and units |
|
DS DS/EN 80416- 1 |
Basic principles for graphical symbols for use on equipment - Part 1: Creation of symbol originals |
|
DS DS/EN 80416- 2 |
Basic principles for graphical symbols for use on equipment - Part 2: Form and use of arrows |
|
DS DS/EN 80416- 3 |
Basic principles for graphical symbols for use on equipment - Part 3: Guidelines for the application of graphical symbols |
|
DS DS/EN 81714- 2 |
Design of graphical symbols for use in the technical documentation of products - Part 2: Specification for graphical symbols in a computer sensible form including graphical symbols for a reference library and requirements for their interchange |
|
DS DS/EN 81714- 3 |
Design of graphical symbols for use in the technical documentation of products - Part 3: Classification of connect nodes, networks and their encoding |
|
DS DS/EN 82045- 1 |
Document management - Part 1: Principles and methods |
|
DS DS/EN 82045- 2 |
Document management Part 2: Metadata elements and information reference model |
|
DS DS/EN 844- 1 |
Round and sawn timber - Terminology - Part 1: General terms common to round timber and sawn timber |
|
DS DS/EN 844- 11 |
Round and sawn timber - Terminology - Part 11: Terms relating to degrade by insects |
|
DS DS/EN 844- 12 |
Round and sawn timber - Terminology - Part 12: - Additional terms and general index |
|
DS DS/EN 844- 2 |
Round and sawn timber - Terminology - Part 2: General terms relating to round timber |
|
DS DS/EN 844- 3 |
Round and sawn timber - Terminology - Part 3: General terms relating to sawn timber |
|
DS DS/EN 844- 4 |
Round and sawn timber - Terminology - Part 4: Terms relating to moisture content |
|
DS DS/EN 844- 5 |
Round and sawn timber - Terminology - Part 5: Terms relating to dimensions of round timber |
|
DS DS/EN 844- 6 |
Round and sawn timber - Terminology - Part 6: Terms relating to dimensions of sawn timber |
|
DS DS/EN 844- 7 |
Round and sawn timber - Terminology - Part 7: Terms relating to anatomical structure of timber |
|
DS DS/EN 844- 8 |
Round and sawn timber - Terminology - Part 8: Terms relating to features of round timber |
|
DS DS/EN 844- 9 |
Round and sawn timber - Terminology - Part 9: Terms relating to features of sawn timber |
|
DS DS/EN 923 |
Adhesives - Terms and definitions |
|
DS DS/EN 971- 1 |
Paints and varnishes - Terms and definitions for coating materials - Part 1: General terms |
|
DS DS/EN 980 |
Graphical symbols for use in the labelling of medical devices |
|
DS DS/EN ISO 10075- 1 |
Ergonomic principles related to mental work-load - Part 1: General terms and definitions |
|
DS DS/EN ISO 10209- 2 |
Technical product documentation - Vocabulary - Part 2: Terms relating to projection methods |
|
DS DS/EN ISO 10318 |
Geosynthetics Terms and definitions |
|
DS DS/EN ISO 10360- 1 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary |
|
DS DS/EN ISO 105- A08 |
Textiles - Tests for colour fastness - Part A08: Vocabulary used in colour measurement |
|
DS DS/EN ISO 10628 |
Flow diagrams for process plants - General rules |
|
DS DS/EN ISO 1107 |
Fishing nets - Netting - Basic terms and definitions |
|
DS DS/EN ISO 11091 |
Construction drawings - Landscape drawing practice |
|
DS DS/EN ISO 11145 |
Optics and optical instruments - Lasers and laser-related equipment - Vocabulary and symbols |
|
DS DS/EN ISO 11192 |
Small craft Graphical symbols |
|
DS DS/EN ISO 11442- 1 |
Technical product documentation - Handling of computer-based technical information - Part 1: Security requirements |
|
DS DS/EN ISO 11442- 2 |
Technical product documentation - Handling of computer-based technical information - Part 2: Original documentation |
|
DS DS/EN ISO 11442- 4 |
Technical product documentation - Handling of computer-based technical information - Part 4: Document management and retrieval systems |
|
DS DS/EN ISO 11807- 1 |
Integrated optics Vocabulary Part 1: Basic terms and symbols |
|
DS DS/EN ISO 11807- 2 |
Integrated optics Vocabulary Part 2: Terms used in classification |
|
DS DS/EN ISO 11979- 1 |
Opthalmic implants - Intraocular lenses - Part 1: Vocabulary |
|
DS DS/EN ISO 12100- 1 |
Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
|
DS DS/EN ISO 12625- 1 |
Tissue paper and tissue products Part 1: General guidance on terms |
|
DS DS/EN ISO 12706 |
Non-destructive testing - Terminology - Terms used in penetrant testing |
|
DS DS/EN ISO 128- 20 |
Technical drawings - General principles of presentation - Part 20: Basic conventions for lines |
|
DS DS/EN ISO 128- 21 |
Technical drawings - General principles of presentation - Part 21: Preparation of lines by CAD-systems |
|
DS DS/EN ISO 1302 |
Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation |
|
DS DS/EN ISO 13567- 1 |
Technical product documentation - Organization and naming of layers for CAD - Part 1: Overview and principles |
|
DS DS/EN ISO 13567- 2 |
Technical product documentation - Organization and naming of layers for CAD - Part 2: Concepts, format and codes used in construction documentation |
|
DS DS/EN ISO 13666 |
Ophtalmics optics - Spectacles lenses - Vocabulary |
|
DS DS/EN ISO 13731 |
Ergonomics of the thermal environment - Vocabulary and symbols |
|
DS DS/EN ISO 13943 |
Fie safety - Vocabulary |
|
DS DS/EN ISO 14539 |
Manipulating industrial robots - Object handling with grasp-type grippers - Vocabulary and presentation of characteristics |
|
DS DS/EN ISO 14588 |
Blind rivets - Terminology and definitions |
|
DS DS/EN ISO 14660- 1 |
Geometrical Product Specifications (GPS) - Geometrical features - Part 1: General terms and definitions |
|
DS DS/EN ISO 14660- 2 |
Geometrical Product Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature |
|
DS DS/EN ISO 14726- 1 |
Ships and marine technology - Identification colours for the content of piping systems - Del 1: Main colours and media |
|
DS DS/EN ISO 14880- 1 |
Microlens array Part 1: Vocabulary |
|
DS DS/EN ISO 15367- 1 |
Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects |
|
DS DS/EN ISO 15785 |
Technical drawings - Symbolic presentation and indication of adhesive, fold and pressed joints |